Page 1
Page 2
The V100 positioner can be ordered as a base
modularity
model pneumatic positioner, converted to standard
NEMA 4X electropneumatic, EX model, or FF (fail freeze)
model in a matter of minutes, without removing the unit
from the mounted valve package. You can add
gauges, a feedback module, or a raised indicator,
at any time....in just a matter of minutes. Of course,
you can also order them configured in any of these
models and then change or remove components
in the field as needed. Maximum modularity
equals maximum flexibility. And with a simple
design and quality components, the performance
is maximum as well.
V100P
V100-EX
The V100E (0/10V)
Nema 4x I/P or
V100-IS
V100-FF
Features
Flexibility
One housing for pneumatic
or electropneumatic.
R100 Feedback Module
Standard
cover with
pointed
indicator
add a raised indicator
(yellow/black or red/green)
1
Valve Accessories & Controls, Inc. 205-678-0507 www.vacaccessories.com
Standard F05 mounting with
interchangeable spindle drives.
Multiple mounting capability
Standard indicator allows
for air to open or air to
close operation—raised
indicator available
Unique electrical compartment,
fitted with an o-ring, is
pressure sealed by the cover
Page 3
V100E
V100 Options
V100 EX
V100 TUF
Tufram
V100 NIC Nickel Coated
®
Coated
V100 FF
V100E 0/10V Volt Unit
V100 with EX Third Party Mounting
V100E GA Gas Approved
2
Page 4
Technical Specifications:
Pneumatic Electropneumatic EX ABB Fairchild Fairchild
V100P V100E & IS V100EX V100FF V100E-0/10V
Input Signal 3-15 PSI 4-20mA 4-20mA 4-20mA 0-10 VDC
Supply Pressure 145 PSI 145 PSI 145 PSI 100 PSI 120 PSI
Linearity error <0.7%f.s. <1.0%f.s. <1.0%f.s. <1.0%f.s <1.0%f.s
Hysteresis <0.4%f.s. <0.6%f.s. <0.6%f.s. <0.6%f.s <0.6%f.s.
Repeatability <0.3%f.s. <0.5%f.s. <0.5%f.s. <0.5%f.s <0.5%f.s.
Temperature range -40° to 185°F -40° to 185°F -40° to 180°F -20° to 150°F -40° to 160°F
(-40° to 85°C) (-40° to 85°C) (-40 to 82°C) (-30° to 65°C) (-40° to 71°C)
Weight 3.5 lbs 3.8 lbs. 4.9 lbs 5.8 lbs 4.6 lbs
Above based on Standard Gain pilot
Spool/Pilot Valves Low Bleed/Low Gain Standard High Gain
Air Delivery @87 (600kPa) 25.5 scfm 28.3 scfm 28.3 scfm
Bleed Rate @87PSI (600kPa) .4 scfm .53 scfm .70 scfm
Pressure Gain 300:1 750:1 1000:1
Air connections ¼” NPT ¼” NPT ¼” NPT ¼” NPT ¼” NPT
Gauges
Cable Entry ½” NPT ½” NPT ½” NPT ½” NPT ½” NPT
Ingress & corrosion
protection NEMA 4X / IP66 NEMA 4X / IP66 NEMA 4X / IP65 NEMA 4X / IP65 NEMA 4X / IP65
Standard coating Polyester (Standard)
Optional coating Tufram Nickel
1
/8
” NPT
1
/8
” NPT
1
/8
” NPT
1
/8
” NPT
1
/8
” NPT
Approvals—Positioners only
Feedback (not rated for EX or IS)
General Purpose
Mechanical Switches:
Type: SPDT-Co Form C, (V3)
Load: Resistive (Inductive)
max 10 A (3) 125/250 VAC
max 0.25 A (0.04) 230 VDC
max 0.5A (0.1) 115 VDC
max 6 A (4) 30 VDC
max 8.5 A(5) 14 VDC
max 11 A (6) 8 VDC
Reed Switches:
Type: SPDT-CO Form , Form C
Contact rating: max 5W or 5VA @ 30 VDC/VAC 0.16 A
Voltage: Switching max 175 VDC
Breakdown min 200 VDC
Current Switching max0.25 A
Carry max 1.5 A
Contact resistance: 0.2 Ohms
Contact capacitance: 0.3 pF
Mechanical and
electrical life: over 100 million operations
4/20 mA Position Feedback:
Voltage supply: 10-30 VDC
Output 4-20 mA, 2 wire
Loop Impedance: max 700W @ 24 VDC
Max linearity error: <1.5%
Hysteresis <0.3%
Temp. sensitivity < 0.1%/10ºF (5.5ºC)
3
Valve Accessories & Controls, Inc. 205-678-0507
Ratings for hazardous locations:
V100-EX
ATEX-explosion protection
1487X, intrinsically safe EEx ia IIC T4/T5/T6
E121X, flameproof EEx d IIC T4/T5/T6
FM and CSA
Explosion Proof CL I, II Div 1 Grp B-G
Intrinsically Safe
FM CL I-II-III Div 1 Grp A-G
CSA CL II Div 1&2 Grp E-G
CL III
Non Incendive
FM CL 1 Div2 Grp A-C
Temperature Class
Short circuit
Current-max max Ambient Temp
T6 50 mA ) 140 °F (60 °C
T5 60 mA 158 °F (70 °C)
T4 60 mA 185 °F (85 °C)
V100-IS (Intrinsically Safe)
ATEX
EEX ia IIcT4/T6
FM
CL1 Div1 Grp A B C D
CSA
EX ia CL1 Grp A B C D
EX ia CL 1 Div2 Grp A B C D
Page 5
Ordering Codes:
Pneumatic V100P
Electro-pneumatic V100E
Explosion Proof V100EX
Intrinsically Safe V100IS
Fail Freeze V100FF
Spindle: D1 Namur (standard)
For additional spindle options, please contact VAC or
visit our website at www.vacaccessories.com
Front Cover:
90 degree rotation 90
60 degree rotation 60
45 degree rotation 45
30 degree rotation 30
Blank scale 00
90 ° Reverse Cover 90R
Indicator Arrow: A
Standard Beacon/Raised (Black/Yellow) B
Optional Beacon/Raised (Red/Green) BRG
Cam: C1 90° standard
For additional cam options, please contact VAC or
visit our website at www.vacaccessories.com
Spool Valve Options:
Standard SG shipped as standard
Low Gain LG
High Gain HG
Feedback Options:
2 SPDT Mechanical Switches M
2 SPDT Reed Switches R
4-20 mA Transmitter mA
Mech Switches w/transmitter MmA
Reed Switches w/transmitter RmA
1 K potentiometer 1K
10 K potentiometer 10K
Options:
0/10 Volt I/P (V100E only) 0/10V
Gas Approved Positioner GA
ATEX Approved Positiner ATEX
Tufram Coating (V100 P and E only) TUF
Nickel Coating (V100 P and E only) NIC
24 PSI Spring 6-30
Example:
V100E-D1-90-B-C1
Electropneumatic with namur spindle, 90 degree cover,
raised indicator, 90 degree cam
Feedback Products Ordering Codes
R100 Series (Not Rated for EX or IS)
R100 Mounts directly to positioner
R300 Mounts directly to actuator; called “Stand alone”
Switches
2 SPDT mechanical M
2 SPDT reed/proximity R
Feedback transmitters
4/20 mA mA
Front Cover (R300 only)
90 degree rotation 90
60 degree rotation 60
45 degree rotation 45
30 degree rotation 30
Blank scale 00
Indicator (R300 only)
Arrow A
Standard Beacon/Raised (Black & Yellow) B
Optional Beacon/Raised (Red & Green) BRG
Spindle (R300 only)
See spindle section/dimensional drawing DX
Examples: R100-M-mA Feedback with mechanical
switches and 4-20mA
transmitter
R300-mA-90-B-D1 Stand alone feedback with
4-20 transmitter, raised
indicator and namur spindle.
V100 Options/Features
Options
Special cams, range springs,
various NEMA ratings, and feedback capability are components
of the V100 positioner package.
Simple Calibration
With the less interactive span and
zero adjustment, and the external
zero adjustment, calibration is
simple and time saving.
Valve Accessories & Controls, Inc. 205-678-0507 www.vacaccessories.com
4
Page 6
Dimensional Drawings V100P and E, R100 and R300
V100 P, E, IS, NIC, and TUF
R100
R300
5
Valve Accessories & Controls, Inc. 205-678-0507 www.vacaccessories.com
Page 7
Dimensional Drawings V100 EX, V100 FF and Specials
13/32" [11mm]
1 9/16" [40mm] *
6 5/8" [168mm] *
7/16" [11mm] *
1 27/32" [47mm] *
5/16" [8mm]
V100 EX
4 11/32" [110mm]
6.7" [170mm]
V100 FF
3 1/2" [89mm] *
1/2" [13mm]
3/32" [2mm]
1 1/32" [26mm]
1 1/4" [32mm] *
EXHAUST
1/4" NPT
7 1/2" [191mm] *
ZERO>0<
6 11/32" [161mm]
Length depending
on spindle type.
2.5” (63.5mm)
3.05" [77.6mm]
V100E 0-10V
1 27/32"[47mm] *
Ø1 9/16" [40mm] *
33/4"[95mm]
7/8" [22mm]
41/2"[114mm]
31/2"[89mm]*
1/2" [13mm]
225/32"[71mm]
25/16" [59mm]
65/8"[168mm]*
7/16"[11mm] *
5/16"[8mm]
43/4"[121mm]
211/32"[60mm]
V100E GA
Valve Accessories & Controls, Inc. 205-678-0507 www.vacaccessories.com
6
Page 8
Marketed by VAC (Valve
Accessories & Controls),
the V100 positioner line is
supported by a knowledgeable and professional staff.
Customer service is a key
component to the VAC
package. Local inventories
and technical assistance
are just a phone call away.
The V100 package of products is a complete line of
pneumatic and electropneumatic positioners with a
variety of I/P modules and coatings to meet a wide
range of product applications. The stackable feedback
module (R100) makes adding position feedback very
simple. The die cast aluminum housing is rugged and
the quality components make this product suitable for
both accurate rotary control and linear applications.
Beacons and Filter Regulators
These accessories are available from stock and
help provide improved product performance and
product visibility.
ValVe accessories & controls
200 Jade Park • Chelsea, AL 35043
TEL: 205-678-0507
FAX: 205-678-0510
info@vacaccessories.com
Gauges
VAC gauges (in stock) are frequently used to help
calibrate, monitor, or troubleshoot a field
performance issue.
Mounting Kits
VAC offers mounting kits (from stock) for a variety of
actuators, making standardization through retrofitting
existing packages with the V100 positioner simple. If
we don’t have the kit in stock, we will make every effort
to service the application with special mounting.
ValVe accessories & controls
12942 Bedford Falls Drive
Cypress, TX 77429
TEL: 713-493-2624 • Cell: 713-253-7781
FAX: 281-256-9399
randye@vacaccessories.com
vacaccessories.com
ValVe accessories & controls
292 Hendricks Road
Bolton Landing, NY 12814
Phone 518-222-1170
FAX: 518-514-1262
bobg@vacaccessories.com
3M10/13
Loading...