FRL’s
TYPE M1–MINI TYPE M2–STANDARD TYPE M3–HIGH FLOW
FILTERS
Port Size
Filtration (micron) 5µ, 25µ, 50µ 5µ, 25µ, 50µ 5µ, 25µ, 50µ
Maximum Supply Pressure
Temperature Range
Drain
Bowl Capacity
Flow (based on 100 psi inlet pressure with
50 micron filter)
REGULATORS
Effect of Supply Pressure variation (25
psig) on Outlet Pressure
Exhaust Capacity (5 psig above
20 psig set point)
Max. Supply Pressure
Flow Capacity at 100 psig (6.9 BAR)
supply and 70 psig (4.8 BAR) outlet
Output Pressure Ranges
Total Air Consumption
@ Maximum Output
Port Size
Mounting Options
FILTER-REGULATORS
Port Size
Filtration (micron)
Maximum Supply Pressure
Temperature Range 41º–140º F / 5º–60º C 41º–140º F / 5º–60º C 41º–140º F / 5º–60º C
Drain Manual / Semi-Auto Manual / Semi-Auto / Auto Manual
Bowl Capacity 0.75 inch
Regulator Output Range 0-10, 0-30, 0-60, 0-120 psi 0-10, 0-30, 0-60, 0-120 psi 0-30, 0-60, 0-120 psi
Flow (based on 100 psi supply/70 psi out) 40, 60 SCFM 90, 120, 120 SCFM 175 SCFM
LUBRICATORS
Port Size
Lubrication Mist Mist Mist
Maximum Supply Pressure
Temperature Range 41º–140º F / 5º–60º C 41º–140º F / 5º–60º C 41º–140º F / 5º–60º C
Bowl Capacity 1.22 inch
Flow (based on 100 psi inlet pressure) 55, 115 SCFM 125, 125, 125 SCFM 245 SCFM
1
⁄8", 1⁄4" NPT
1.0 MPa
10 BAR
145 psi
1
⁄4", 3⁄8", 1⁄2" NPT
1.0 MPa
10 BAR
145 psi
3
⁄4", 1" NPT
1.0 MPa
10 BAR
145 psi
41º–140º F / 5º–60º C 41º–140º F / 5º–60º C 41º–140º F / 5º–60º C
Manual / Semi-Auto Manual / Semi-Auto / Auto Manual
0.75 inch
3
2.75 inch
3
6.71 inch
3
55, 85 SCFM 120, 120, 120 SCFM 175, 175 SCFM
< 0.2 psig
(13.8 mBAR)
<0.25 SCFM
(<7 LPM)
< 0.2 psig
(13.8 mBAR)
<0.25 SCFM
(<7 LPM)
< 0.2 psig
(13.8 mBAR)
<0.25 SCFM
(<7 LPM)
145 psig (10 BAR) 145 psig (10 BAR) 145 psig (10 BAR)
40, 60 SCFM 90, 120, 120 SCFM 275 SCFM
0-10 psig (0-0.69 BAR)
0-30 psig (0-2.1 BAR)
0-60 psig (0-4.1 BAR)
0-120 psig (0-8.3 BAR)
0-10 psig (0-0.69 BAR)
0-30 psig (0-2.1 BAR)
0-60 psig (0-4.1 BAR)
0-120 psig (0-8.3 BAR)
0-30 psig (0-2.1 BAR)
0-60 psig (0-4.1 BAR)
0-120 psig (0-8.3 BAR)
0.3 SCFH (0.14 LPM) 0.3 SCFH (0.14 LPM) 0.5 SCFH (0.11 LPM)
1
⁄8", 1⁄4" NPT
1
⁄4", 3⁄8", 1⁄2" NPT
3
⁄4", 1" NPT
Pipe, Panel or Bracket Pipe, Panel or Bracket Pipe, Panel or Bracket
1
⁄8", 1⁄4" NPT
, 25µ, 50µ
µ
5
1.0 MPa
10 BAR
145 psi
1
⁄8", 1⁄4" NPT
1.0 MPa
10 BAR
145 psi
3
3
1
⁄4", 3⁄8", 1⁄2" NPT
, 25µ, 50µ
µ
5
1.0 MPa
10 BAR
145 psi
2.75 inch
1
⁄4", 3⁄8", 1⁄2" NPT
1.0 MPa
10 BAR
145 psi
5.18 inch
3
⁄4", 1" NPT
, 25µ, 50µ
µ
5
1.0 MPa
10 BAR
145 psi
3
6.71 inch
3
⁄4", 1" NPT
3
1.0 MPa
10 BAR
145 psi
3
10.3 inch
3
6
FRL’s
FRL ORDERING INFORMATION
SIZE
Miniature Series M1
Standard Series M2
High Flow Series M3
DESCRIPTION
Filter F
Regulator R
Lubricator L
Filter Regulator FR
Filter Regulator FRP
PLUS Lubricator
Filter, Regulator, FRL
Lubricator
PORT SIZE
1
⁄8" NPT (M1 only) 1N
1
⁄4" NPT (M1 or M2) 2N
3
⁄8" NPT (M2 only) 3N
1
⁄2" NPT (M2 only) 4N
3
⁄4" NPT (M3 only) 6N
1" NPT (M3 only) 8N
PRESSURE RANGES
0-10 psi, (M1 & M2) A
0-30 psi,
0-60 psi, M
0-120 psi, Standard H
Omit for Filters & Lubricators
FILTERS
50 Micron Filter, C
Standard
25 Micron Filter B
5 Micron Filter F
Omit for Regulators & Lubricators
DRAIN
Manual Drain, Standard M
Semi-Automatic Drain S
Auto Drain (M2 only)
Omit for Regulators & Lubricators
NOTE: Individual regulators,
FRs, filters, and lubricators
come complete with bracket (except M3).
FRL assemblies come complete with all bracket/connectors.
L
A
FRL FEATURES
Modular design for service
& interchangeability
Miniature (M1), Standard (M2) &
High Flow (M3)
Small package size and light
weight construction
Competitively priced
FILTERS
M1 has polycarbonate bowl,
M2 & M3 have polycarbonate bowl
with metal guard
STOCK ELEMENTS - 5, 25 or 50
micron
Manual, semi-auto or auto drain
available
REGULATORS
Bellofram® Rolling Diaphragm for
superior regulator performance
Panel, pipe, or bracket (included)
mounting
Metal body, polycarbonate
bonnet and knob
Non-rising adjustment knob with
push-pull lock ring feature
FILTER REGULATORS
Aluminum and polycarbonate
construction
Manual, semi-auto or autodrain
available
M1 has polycarbonate bowl;
M2 & M3 have polycarbonate bowl
with metal guard
Non-rising adjustment knob with
push-pull lock ring feature
For panel or bracket mounting
Bellofram® Rolling Diaphragm for
superior regulator performance
LUBRICATORS
M1 has polycarbonate bowl;
remove bowl for filling.
M2 & M3 have polycarbonate bowl
with metal guard; top plug permits
filling without removing bowl or
shutting off air
Adjust drip rate by hand, using
graduated ring on M1& M3, with
screwdriver on M2
7
FRL’s
129.5
5.10
1/8" NPT
1/4" NPT
24
0.95
30.5
1.2
5
0.21
FRL
side
view
24.0
0.95
30.5
1.20
1/8" NPT
1/4" NPT
Gauge
Port
1/8" NPT
IN
FRL
side
view
1/8" NPT
1/4" NPT
Gauge
Port
1/8"
IN
161.5
6.36
40
1.57
Filter-
Regulator
129.5
5.10
1
/8" NPT
1/4" NPT
Lubricator
213
8.39
1/8"
NPT
Gauge
Port
7
0.28
7
0.28
45
1.77
54
2.13
64
2.52
FRL
1/4" NPT
3/8" NPT
1/2' NPT
181
7.13
FRL
side
view
FRL
50
1.97
1/8" NPT
37
1.46
5.6
.22
146
5.76
5.6
.22
63
2.48
1/8" NPT
1/8"
NPT
Gauge
Port
140
5.53
1/4" NPT
3/8" NPT
1/2" NPT
32
1.26
63
2.48
Regulator
63
2.48
16
.63
150
5.93
1/4" NPT
3/8" NPT
1/2' NPT
181
7.13
Filter
Lubricator
I
1/8" NPT
Gauge
Port
1/4" NPT
3/8" NPT
1/2" NPT
Filter Regulator
FRL
side
view
IN
1/8" NPT
Gauge
Port
44.5
1.75
54.2
2.13
1/4" NPT
3/8" NPT
1/2" NPT
98
3.86
239.5
9.43
98
3.86
239.5
9.43
Regulator
42.0
1.65
1/8" NPT
1/8"
NPT
Gauge
Port
21
0.8
89
3.50
1/8" NPT
1/4" NPT
40
1.57
Filter
42
1.645
102.5
4.035
10
.394
TYPE M1
TYPE M2
8
FRL’s
129.5
5.10
1/8" NPT
1/4" NPT
24
0.95
30.5
1.2
5
0.21
FRL
side
view
24.0
0.95
30.5
1.20
1/8" NPT
1/4" NPT
Gauge
Port
1/8" NPT
IN
FRL
side
view
1/8" NPT
1/4" NPT
Gauge
Port
1/8"
IN
1
61.5
6
.36
40
1.57
Filter-
Regulator
129.5
5.10
1/8" NPT
1/4" NPT
Lubricator
213
8.39
1/8"
NPT
Gauge
Port
7
0.28
7
0.28
45
1.77
54
2.13
64
2.52
FRL
1/4" NPT
3/8" NPT
1/2' NPT
181
7.13
FRL
side
view
FRL
50
1.97
1/8" NPT
37
1.46
5.6
.22
146
5.76
5.6
.22
63
2.48
1/8" NPT
1/8"
NPT
Gauge
Port
140
5.53
1/4" NPT
3/8" NPT
1/2" NPT
32
1.26
63
2.48
Regulator
63
2.48
16
.63
150
5.93
1/4" NPT
3/8" NPT
1/2' NPT
181
7.13
Filter
Lubricator
I
1/8" NPT
Gauge
Port
1/4" NPT
3/8" NPT
1/2" NPT
Filter Regulator
FRL
side
view
IN
1/8" NPT
Gauge
Port
44.5
1.75
54.2
2.13
1/4" NPT
3/8" NPT
1/2" NPT
98
3.86
239.5
9.43
98
3.86
239.5
9.43
Regulator
42.0
1.65
1/8" NPT
1/8"
NPT
Gauge
Port
21
0.8
89
3.50
1/8" NPT
1/4" NPT
40
1.57
Filter
42
1.645
102.5
4.035
10
.394
TYPE M1
TYPE M2
9
FRL’s
REPLACEMENT PARTS
M1, M2 & M3: REGULATED PRESSURE VS. FLOW
Description Model #
Miniature Size Connector Kit M1K
Miniature Size Connector Kit FR+L M1K2
Standard Size Connector Kit M2K
Standard Size Connector Kit FR+L M2K2
High Flow Size Connector Kit 3⁄4" M3K
High Flow Size Connector Kit 1" M3K1
High Flow Size Connector Kit 3⁄4" FR+L M3K2
High Flow Size Connector Kit 1" FR+L M3K3
Miniature Size Filter or Lubricator Bracket M1FB
Standard Size Filter or Lubricator Bracket M2FB
High Flow Size Filter or Lubricator Bracket M3FB
Miniature Size Regulator or Filter Regulator Bracket M1RB
Standard Size Regulator or Filter Regulator Bracket
High Flow Size Regulator or Filter Regulator Bracket M3RB
M2RB
Description Model #
Miniature 5 micron Filter Element M1FK05
Miniature 25 micron Filter Element M1FK25
Miniature 50 micron Filter Element M1FK50
Standard 5 micron Filter Element M2FK05
Standard 25 micron Filter Element M2FK25
Standard 50 micron Filter Element M2FK50
High Flow 5 micron Filter Element M3FK05
High Flow 25 micron Filter Element M3FK25
High Flow 50 micron Filter Element M3FK50
Miniature Bowl / Manual Drain Assembly M1DM
Miniature Bowl / Semi-Automatic Drain Assembly M1DSA
Standard Bowl / Manual Drain Assembly M2DM
Standard Bowl / Semi-Automatic Drain Assembly M2DSA
Standard Bowl / Automatic Drain Assembly
High Flow Bowls / Manual Drain Assembly M3DM
M2DA
10
Pressure Gauges - “GG” Series Gauges pg. 11
Loading...