Sharpe® Series FS 84 /99 Standard and Full Port Ball Valves offer as standard features, advantages
that other valve manufacturers offer only as costly extras. This is the Sharpe
3-Piece Design
In-line serviceable swing-out center section allows
easy access to internal valve components without
disturbing alignment of pipe. Functions as both valve
and union.
Bottom Entry Live Loaded Stem
Self adjusts with pressure and temperature fluctuations. Blow-out proof anti-static design helps prevent
accidents and injuries.
Live Loaded High Cycle Stem
Two belleville washers in manual valve and four
belleville washers in actuated valve allow the valves
to perform exceptionally during high cycling and in
control applications.
Fully Encapsulated Body Seals
Allows valve ends to be welded in line without
disassembly, saving costly labor time. Also prevents
seal ruptures in high pressure or steam applications.
Variety of End Combinations
A wide choice of optional end connections are
available including, but not limited to threaded ends,
socket weld ends, butt weld ends, flush bottom tank
pads, grooved ends and 150#/300# flanges.
Floating Ball Design
Precision engineered solid stainless steel ball with
relief hole in stem slot prevents build up of cavity
pressure while valve is in open position. Bi-directional
floating ball seats downstream reducing torque and
guaranteeing a bubble-tight shut off.
Encapsulated Body Bolts
Heavy duty stainless steel bolting is protected from
outside environment assuring valve integrity.
Traceability
Heat numbers are provided on all valve bodies and
ends. CMTR’s (certified mill test reports) are available
upon request.
®
advantage.
Integral Mounting Pad
Ideal for actuation. Centering lip feature assures
precise alignment of bracket, stem and coupler.
Actuators may be retrofitted on existing series FS
84/99 without disruption of line integrity. Allows for
secondary containment unit to be added when
necessary.
Lockable Handle
All Sharpe
standards with locking device. Keeps valves from
being opened or closed accidentally.
Slotted Seat Design
Relief slots help equalize body pressure, reduce
torque and assure leak-tight sealing. Seats also
provide a wiping action that cleans ball and seats
each time valve is cycled.
Choice of Seats
A wide variety of seat materials are readily available
for the most demanding applications, including
Nova*, PEEK, TFE, RTFE, and TFM
body seals are Grafoil.
®
Series FS 84/99 Valves meet OSHA
TM
. Stem packing and
th
Fire Safe API 607 4
A metal centering ring is part of the end cap that
fits into the body (tongue and groove) and aligns
the pipe end with the ball. During fire, the seat is
destroyed and the ball moves downstream where
it makes contact with a special shaped end that
provides a secure fire tight seal.
* Carbon and Graphite Filled TFE
** TFM is a registered trademark of Dyneon, LLC
Edition
18
17
15B
15
21
13
12
7
8
4
3
16
14
11
9
19
6
5
2
1
5
6
2
20
15C
SERIES FS 84/99
21 -21 -
VALVE PARTS AND IDENTIFICATION
FS84
1/4”,3/8”,1/2”
FS 84 3/4” - 2-1/2”
FS 99 1/2” - 2”
APPLICABLE STANDARDS
Body Wall Thickness ASME B16.34
SW & Threaded Ends ASME B16.11
Butt-weld Ends ASME B16.25
Flange Dimensions ASME B16.5
Basic Design ASME B16.34 (note 1)
Fire Test API 607 4th Edition
Testing (Options) ASME B16.34 API 598
Note 1: When specied, valves can be furnished in
accordance with ASME B16.34 requirements.
16 A
PART NO. PART QTY. MATERIAL
1 Body 1 316 Stainless Steel ASTM A351 CF8M
Alloy 20 ASTM A351 CN7M
Carbon Steel ASTM A216 WCB
Hastelloy C ASTM A494 Type CW-12MW
Monel ASTM A494 GR M35-1
1/2” 2 = Alloy 20 3 = Monel N = Nova BW = Butt Weld Sch. 5, 10, 40, & 80 F = Fugitive Emissions
3/4” FS 99 3 = Monel 5 = Hastelloy C M = TFM
1” (Full Port) 5 = Hastelloy C FBE = Flush Bottom Tank Flange E = Extended Stem
1-1/4” L = Lockable Extended Stem
1-1/2” D = Leak Detection Stem
2” GO= Gear Operator
2-1/2” 7= 17- 4PH Stem
A = Nace
TM
SW = Socket Weld F = Certified ANSI 593.00.01
3/4” FS84 6 6 T G TE X
Toll-Free 1-877-7SHARPE
(877) 774-2773
Fax: (708) 562-9250
E-Mail: info@sharpevalves.com
www.sharpevalves.com
A Division of Smith-Cooper International, LLC
Northlake, Illinois 60164 U.S.A.
Due to continuous development of our product range we reserve the right to change the dimensions and information contained in the leaet as required. Rev. 6/09
1260 Garnet Drive
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.