Page 1
FIBERGLASS AUTOMATIC WATER SOFTENER
45,000 - 750,000 Grains Softening Capacity
301-11 Water Softener
The Parker Automatic Water Softener
gives you the best in quality equipment to soften water most efficiently
at reduced Operating Cost. You can
place complete confidence in Parker.
For over 50 years, Parker has manufactured Softeners widely used in laundries, hospitals, institutions, schools,
hotels, apartments, restaurants, dairies
and industrial plants. Each model
Softener has been properly engineered
and designed to assure the best in
quality and to furnish soft water by the
most efficient and economical method
known. Constant research, development and proven satisfaction makes
the Parker name synonymous with
quality.
ADVANTAGES
1. Reliable Control Valve
These softeners include a top mounted
solid brass valve with a fully adjustable 5-cycle control for controlled
upflow back wash, downflow brining,
slow rinse, rapid rinse, timed brine
refill and downflow service. The valve
features time proven hydraulically
balanced pistons to pilot service flow
and regeneration. Models standardly
include a built-in 12-day Time Clock.
This valve brings great performance
and versatility to commercial and
industrial water softening applications.
Fiberglass
Automatic
Water
Softener
301-11 Water Softener
2. Safe Low Voltage Controls
All models require a 115 Volt, 1Ph,
60 Hz electrical duplex outlet and
include a 115/24 Volt plug-in transformer and 10 Ft. Extension Cord.
The low voltage electrical supply at
the softener near the water connections provides greater safety to
operating personnel.
3. Softener Tank
The Heavy Duty NSF (National
Sanitation Foundation) approved
fiberglass reinforced pressure vessel
is totally non-corrosive and assures
dependable, rust free service. Softener
is suitable for pressures to 100 PSI
and temperatures to 110° F.
4. Resin
The FDA approved high capacity lon
Exchange Resin has uniform and
stable beads to assure long life, high
salt efficiency and maximum hardness
removal.
PARKER
B O I L E R C O.
NEVER A COMPROMISE FOR QUALITY OR SAFETY
5. Distributor
A bottom stack or hub and lateral
distributor system provides maximum
service flow and minimal pressure loss.
6. Brine Tank
The high density polyethylene Brine
Tank will not crack or rust out and
comes complete with a high level shutoff and overflow connection. Dust-tight
covers keep out unwanted impurities.
Be sure of getting only the best Water
Softener at low initial cost. The Parker
is a rugged, heavy duty Industrial softener, built to provide many years of
trouble-free service. The purchase of
a Parker Softener assures not only
the ultimate in quality but the guarantee of an experienced manufacturer
to assure the ultimate in economy of
operation and maintenance.
5930 Bandini Boulevard
Los Angeles CA 90040
Fax (323) 722-2848
www.parkerboiler.com
Phone (323) 727-9800
BROCHURE 301-11 0H1
Page 2
FIBERGLASS AUTOMATIC WATER SOFTENER
BRINE TANK SOFTENER
dia. dia.
tank height
max. height
tank height
45,000 - 750,000 Grains Softening Capacity
301-11 Water Softener
PARKER FIBERGLASS AUTOMATIC WATER SOFTENER
MODEL NO CAPACITY FLOW RATE(G.P.M) PIPE SIZE TANK SIZE (DIA/HEIGHT) INCHES MAX HEIGHT SHIPPING
(GRAINS) @15PSI∆P* @25PSI∆P** (INCHES) SOFTENER BRINE (INCHES) WEIGHT (LBS)
FGA-45-1 45,000 16 22 1 10/54 18/40 62 140
FGA-90-1 90,000 19 26 1 14/65 24/41 73 240
FGA-120-2 120,000 47 64 2 16/65 24/41 80 450
FGA-180-2 180,000 63 81 2 22/54 24/50 73 575
FGA-240-2 240,000 74 97 2 24/60 30/50 80 825
FGA-300-2 300,000 68 91 2 24/71 30/50 91 975
FGA-450-2 450,000 84 105 2 30/72 39/48 95 1,400
FGA-600-2 600,000 85 100 2 36/72 39/60 95 1,850
FGA-750-2 750,000 90 105 2 36/72 42/60 95 2,100
* Recommended maximum continuous flow rate
** Maximum instantaneous flow rate
NOTE
301-11 Water Softener
1. Electrical: A 115 Volt, 60 Hz, 1 Ph
duplex outlet that is always energized
is required. All Models include a 10'
Extension Cord and 115/24 Volt Transformer so that the Softener operates
on 24 VAC.
5930 Bandini Boulevard
Los Angeles CA 90040
Fax (323) 722-2848
www.parkerboiler.com
Phone (323) 727-9800
BROCHURE 301-11 0H1
2. Water Requirements:
MINIMUM PRESSURE/TEMPERATURE:
25 PSI/34° F
MAXIMUM PRESSURE/TEMPERATURE:
100 PSI/110° F
The softener tank must not be subjected to freezing conditions. If piping has
any sediment or iron, install separate
filter ahead of softener.
3. The Models FGA-45 through FGA-120
are shipped loaded with Resin. The
larger models are shipped with separate
Resin and require loading at time of
installation.
4. Always locate the softener close to
a drain and provide for the installation
of a bypass valve.
PARKER
B O I L E R C O.
5. Softener capacities are based on
30,000 Grains per Cu. Ft. of Resin.
6. For dual models, add a “D” in front
of the part number.
Loading...