
Series 87 Electric Actuator
Standard Features
Motor:Motor:
•
Motor: Reversing, brushless, capacitor run 115 VAC
Motor:Motor:
50/60 Hz, single phase
Overload protection:Overload protection:
•
Overload protection: Integral thermal overload
Overload protection:Overload protection:
protection for motor windings with automatic reset
Gear train:Gear train:
•
Gear train: Permanently lubricated
Gear train:Gear train:
Conduit:Conduit:
•
Conduit: Two 3/4” FNPT conduit entries to eliminate
Conduit:Conduit:
cross feed between control and power signals
Manual override:Manual override:
•
Manual override: Push down on
Manual override:Manual override:
handwheel until engaged with cam and rotate
Limit switches:Limit switches:
•
Limit switches: Standard end of travel limit switches
Limit switches:Limit switches:
can be used for light indication (not to be use with
PLC for position confirmation)
Auxiliary (Additional) limit switches:Auxiliary (Additional) limit switches:
•
Auxiliary (Additional) limit switches: Each electric
Auxiliary (Additional) limit switches:Auxiliary (Additional) limit switches:
actuator is provided as a standard with 2-SPDT
auxiliary limit switches
Enclosure:Enclosure:
•
Enclosure: Type 4X
Enclosure:Enclosure:
Mechanical Brake:Mechanical Brake:
•
Mechanical Brake: Each electric actuator is provided
Mechanical Brake:Mechanical Brake:
as a standard with a mechanical brake
Corrosion resistant mounting:Corrosion resistant mounting:
•
Corrosion resistant mounting: Mounting is with
Corrosion resistant mounting:Corrosion resistant mounting:
stainless steel bracket, stainless steel coupling, and
stainless steel hardware
Output torque:Output torque:
•
Output torque: Series 87 Electric Actuators have an
Output torque:Output torque:
output torque range from 5000 in/lbs to 10,000
in/lbs
PTC Space Heater:PTC Space Heater:
•
PTC Space Heater: A PTC (Positive Temperature
PTC Space Heater:PTC Space Heater:
Coefficient) space heater is provided as standard
equipment
Options
• Two-wire control
• Center-off
• Voltages
• Local Remote Station
178
Specifications
Size: E87,F87
Torque: 5000-10,000 in/lbs
Voltage: 120 VAC 1 Ph 50/60Hz
AMP Draw: E87 1,7 F87 2.2
Conduit Entry: Two (2) 3.4" FNPT
Max Ambient Temp: 150º F
Switches: Four (4) single pole, double
throw (4-SPDT) 15 amp rated
Cycle Time per 90º: E87, F87 30 seconds
9.00
12.36
3.33
3.30
2x
3/4" NPTF
2.69
2.06
10.0 CLEARANCE
FOR COVER REMOVAL
2.14
2.06
4.18
8.36
2.69
10.5
13.5
Max
Sample Specification
All Series 87 electric actuators shall have a thermally protected, bi-directional (reversing type), capacitor run motor with a permanently lubricated gear train. Actuator shall
have planetary gearing encompassed in an die-cast
aluminum housing with stainless steel trim, conforming
to Type 4X. Each actuator shall have a manual override,
visual position indication, two (2) auxiliary limit switches, a
PTC heater and a mechanical brake as supplied by
Asahi/America.
Engineering Data
ATADGNIREENIGNE
caV511
ledoM
euqroT
pmA
)sbl/ni(
78E 000,5 7.1 %05 0.1 %05 03 43
78F000,012.2%052.1%050343
ytuD
warD
elcyC
caV032
pmA
ytuD
warD
elcyC
ASAHI/AMERICA
elcyC
repemiT
09
seergeD
hgieW
)sbl(
)sdnoces(
Rev. F 8-11