FEATURES
•Fully compliant to ASME B16.34 and API 608
•Fire safe to API 607 4th Edition & ISO 10497
•ISO 5211 actuator mounting pads
•NACE MR01-75 Revision 2003 compliant
•Standard 304SS latch lock handles
•“Extended” packing nuts for easy access when
automated
•Electrically grounded ball and
stem
•TFM seats provide superior high temperature
performance and chemical resistance
•Tailpiece gasket positioned to isolate threads
from line fluid
•Tailpiece-to-body connection complies with API
608 and ISO 17292
Series F1-CS & F1-SS ASME B16.34
& API 608 Class 150 & 300
Unibody Flanged-End Ball Valves
1/2”-1” Sizes
RATINGS
Class 150: WCB rated at 285PSIG @ 100°F
CF8M rated at 275PSIG @ 100°F
Class 300: WCB rated at 740PSIG @ 100°F
CF8M rated at 720PSIG @ 100°F
250PSIG Saturated Steam Rating-All TFM
Seated Valves
REV. 11/03
MATERIALS OF CONSTRUCTION (STD)
PART QTY. DESCRIPTION STANDARD MATERIAL
1 1 BODY ASTM A216 GR WCB or A351 GR CF8M
2 1 INSERT ASTM A216 GR WCB or A351 GR CF8M
3 1 BALL
ASTM A276 GR 316 SS / A351 GR CF8M
4 1 STEM ASTM A276 GR 316 SS
5 2 SEAT TFM (R-PTFE)
6 1 THRUST WASHER TFM (R-PTFE)
7 1 BODY SEAL GRAPHITE
8 2 STEM PACKING GRAPHITE
9 1 PACKING NUT ASTM A276 GR 316 SS
10 1 LOCK WASHER 304 SS
11 1 HANDLE NUT 304 SS
12 1 HANDLE ASSY 304 SS - VINYL COATED
NOT 2
GROUNDING SPRING
304 SS
SHOWN 2
GROUNDING BALL
304 SS
11
M
(DIA)
B
E
F
G
A
4
10
9
8
6
1
3 5
2
7
D
C
12
A1
DIMENSIONS, WEIGHTS, CV FACTORS & MAXIMUM OPERATING TORQUES
CLASS 150
SIZE A A1 B C D E F G H J K M ISO WT. CV
(PORT) (DIA) (DIA) (DIA) (DIA)
PATTERN
LBS
1/2” 0.43 .50 4.25 2.3 5.1 1.53 .78 .350 .20 .31 1.42
3.50
F03 2.7 16 100
3/4” 0.59 .75 4.62 2.8 5.8 2.06 1.03 .425 .28 .44 1.65
3.88
F04 4.3 27 130
1” 0.81 1.0 5.00 2.9 5.8 2.33 1.33 .402 .28 .44 1.65
4.25
F04 5.7 42 150
CLASS 300
SIZE A A1 B C D E F G H J K M ISO WT. CV
(PORT) (DIA) (DIA) (DIA) (DIA)
PATTERN
LBS
1/2” 0.43 .50 5.50 2.3 5.1 1.53 .78 .350 .20 .31 1.42
3.75
F03 4.7 16 100
3/4” 0.59 .75 6.00 2.8 5.8 2.06 1.03 .425 .28 .44 1.65
4.62
F04 7.2 27 130
1” 0.81 1.0 6.50 2.9 5.8 2.33 1.33 .402 .28 .44 1.65
4.88
F04 8.1 42 150
K
(DIA)
J
(DIA)
H
1/4” - 20UNC
TORQUE
(IN-LB)-
TFM SEATS
TORQUE
(IN-LB)-
TFM SEATS
Series F1-CS & F1-SS ASME B16.34
& API 608 Class 150 & 300
Unibody Flanged-End Ball Valves
1-1/2” - 6” Sizes
REV. 11/03
FEATURES
• Fully compliant to ASME B16.34 and API 608
• Fire safe to API 607 4th Edition & ISO 10497
• ISO 5211 actuator mounting pads & patented “Square Drive” stem design
allow direct mounting of ISO operators without brackets and/or adaptors
• NACE MR01-75 Revision 2003 compliant
• Standard stainless locking handles, 1-1/2” to 3”, locking handles, 4” & 6”
• “Submerged” packing adjustment allows packing to be adjusted when
mounted with ISO-compliant gear operators & actuators
• Electrically grounded ball and
stem
• TFM seats provide superior high temp performance & chemical resistance
• Tailpiece gasket positioned to isolate threads from line fluid
• Tailpiece-to-body connection complies with API 608 & ISO 17292
RATINGS
Class 150: WCB rated at 285PSIG @ 100°F
CF8M rated at 275PSIG @ 100°F
Class 300: WCB rated at 740PSIG @ 100°F
CF8M rated at 720PSIG @ 100°F
250PSIG Saturated Steam Rating-All TFM Seated Valves
MATERIALS OF CONSTRUCTION (STD)
PART QTY. DESCRIPTION STANDARD MATERIAL
1 1 BODY ASTM A216 GR WCB or A351 GR CF8M
2 1 INSERT ASTM A216 GR WCB or A351 GR CF8M
3 1 BALL
ASTM A276 GR 316 SS / A351 GR CF8M
4 1 STEM ASTM A276 GR 316 SS
5 2 SEAT TFM (R-PTFE)
6 1 THRUST WASHER TFM (R-PTFE)
7 1 BODY SEAL GRAPHITE
8 2 STEM PACKING GRAPHITE
9 1 PACKING PLATE ASTM A351 GR CF8M
10 2 PACKING BOLT ASTM A193 GR B8
11 4
BELLEVILLE WASHER
300 SERIES SS
12 2 PACKING NUT ASTM A194 GR 8
13 1 STOP PLATE 304 SS
14 1 SNAP RING 300 SERIES SS
15 1 HANDLE ASSY ASTM A351 GR CF8M (w/CS PIPE -4”/6”)
16 1 STOP PIN 304 SS
17 1 STOP PIN NUT 304 SS
18 1 HANDLE BOLT 304 SS
NOT 2
GROUNDING SPRING
304 SS
SHOWN 2
GROUNDING BALL
304 SS
DIMENSIONS, WEIGHTS, CV FACTORS & MAXIMUM OPERATING TORQUES - CLASS 150
SIZE A A1 B C D F G H J K M ISO WT. CV
(PORT) (DIA)
(SQUARE)
(DIA)
(DIA) (DIA)
(PATTERN)
LBS
1-1/2” 1.25 1.50 6.50 4.1 10.0 2.55 .73 14MM .74 2.76 5.0
F07
12.5 100 250
2” 1.50 2.00 7.00 4.8 10.0 3.07 .76 14MM .74 2.76 6.0
F07
18.5 145 400
2-1/2” 2.00 2.50 7.50 5.4 10.0 3.60 .76 14MM .74 2.76 7.0
F07
29.0 280 475
3” 2.31 3.00 8.00 5.9 10.0 4.16 .76 14MM .74 2.76 7.5
F07 33.0 420 550
4” 3.00 4.00 9.00 7.0 18.5 4.87 .89 17MM .89 4.02 9.0
F10 61.0 605 1000
6” 4.51 6.00 10.50 8.5 18.5 6.50 .89 17MM .89
4.02 & 4.92
11.0
F10 & F12 99.0 900 1600
DIMENSIONS, WEIGHTS, CV FACTORS & MAXIMUM OPERATING TORQUES - CLASS 300
SIZE A A1 B C D F G H J K M ISO WT. CV
(PORT) (DIA)
(SQUARE)
(DIA)
(DIA) (DIA)
(PATTERN)
LBS
1-1/2” 1.25 1.50 7.50 4.8 10.0 2.55 .73 14MM .74 2.76 6.12
F07
20.0 100 250
2” 1.50 2.00 8.50 5.2 10.0 3.40 .76 14MM .74 2.76 6.50
F07
27.0 145 400
3” 2.31 3.00 11.12 5.9 16.0 4.16 .76 14MM .74 2.76 8.25
F07 47.5 420 550
4” 3.00 4.00 12.00 7.3 18.5 5.12 .89 17MM .89 4.02 10.0
F10 77.0 605 1000
6” 4.51 6.00 15.88 8.5 18.5 6.50 .89 17MM .89
4.02 & 4.92
12.5
F10 & F12 119.0 900 1600
M
TORQUE (IN-LB)
TFM SEATS
TORQUE (IN-LB)
TFM SEATS
(DIA)
A1
10
(DIA)
K
10
11
12
STEM ACROSS
J
CORNERS DIA,
16
18
H
STEM
SQUARE A.F.
D
15
14
13
4
G
17
F
6
9
8
C
2
A
5
1
3
B
7
SERIES F1-CS & F1- SS
F1 R C S R G LH 1F 200
SERIES
F1 = UNIBODY
FLANGED
PORT SIZE
R =
REDUCED
BODY & TAILPIECE
MATERIAL
C = WCB CARBON
STEEL
S = CF8M STAIN-
LESS STEEL
A = CN7M ALLOY
20
M =MONEL
I = INCONEL
H =HASTELLOY
BALL/STEM MAT’L
S = 316 SS
A = ALLOY 20
H = HASTELLOY
M = MONEL
I = NICKEL
SEAT MAT’L
R = TFM
(RTFE)
P = PEEK
U =UHMW
V = VIRGIN
PTFE
SEAL MAT’L
G =GRAPHITE
R = TFM
(RTFE)
V = VIRGIN
PTFE
U = UHMW
ENDS
1F = CLASS 150 RF
3F = CLASS 300 RF
FF = CLASS 150
FLAT FACE
SIZE
050 = 1/2”
075 = 3/4”
100 = 1”
150 = 1-1/2”
200 = 2”
250 = 2-1/2”
300 = 3”
400 = 4”
600 = 6”
800 = 8”
NUMBERING SYSTEM ... HOW TO ORDER:
QUADRANT VALVE & ACTUATOR , LLC • 108 BLUFFWOOD DR. • BROUSSARD, LA 70518 • www.QUADRANTVALVE.com
337-837-8650 • FAX 337-837-8651 • TOLL FREE 1-877-625-5858
1” F1 with
304SS Locking
Oval Handle
2” F1 with
C-Series
Pneumatic
Actuator
6” F1 with Quadrant
Gear Operator
REV. 11/03
HANDLE TYPE
LH = LOCKING LEVER
(SS TO 3”)
SL = STAINLESS LATCH LOCK
(STD. on 1/2” to 1”)
LO = LOCKING STAINLESS
OVAL (1/2” to 1”)
PA = DOUBLE ACTING
PNEUMATIC
SA = SPRING RETURN
PNEUMATIC
SR = DEADMAN HANDLE
(1/2” to 1”)
GO
=GEAR OPERATED
Loading...