- 192 -
PMV POSITIONER
PMV P4 PNEUMATIC POSITIONER
PMV P4 POSITIONER
ON INTIMIDATOR TYPE J CONTROL VALVE
APPLICA TION DATA
●Control of Intimidator, Boss and Doctor Control Valves
●Split Range for Parallel Stations
●Fine Tune Control
●Where Required Air Pressure is Greater than Controller Output
●Where Change of Actuator Action is Desired (Reverse to Direct
& vice versa)
RATINGS
Temperature Range ……………-4 to 185°F
(-20 to 85°C)
Supply Pressure ………………60 psig
Air Consumption ………………0.31 scfm (P4)
0.71 scfm (P5)
0.78 scfm (EP5)
Input Signal ……………………3-15 psig, Split Range 4-20 mA
Linearity …………………………±0.7% (P4)
<
0.5% (P5 & EP5)
Hysteresis ……………………….0.8% (P4)
<0.75% (P5)
<0.5% (EP5)
Body Construction ……………Aluminum
APPLICABLE CODES
CENELEC, FM & CSA approved
PMV POSITIONER
●Pneumatic or Electro-Pneumatic
●Compact, Rugged Design
●Easy to Calibrate
●Bright, Visible Indicator
●Low Air Consumption
●Mounts Compactly on Valve
●Stainless Steel Cam
●External Zero Adjustment
●Modular Design
OPTIONS
●Mechanical Limit Switch
●Proximity Limit Switch
●4-20 mA Position Transmitter Feedback
●Potentiometer 1K Feedback
●Gauges
MODELS
P4 Pneumatic Positioner
P5 Pneumatic Positioner w/Gauges
EP5 Electro-pneumatic Positioner w/Gauges
SPECIFICATION
The Positioner shall be modular and cam characterized with
FM, CSA and CENELEC certifications and shall be mounted
directly onto the valve. Feedback, I/P Transducer and/or
Limit Switch options shall be available.