12950 W.Eight Mile Road • Oak Park,MI 48237-3288 • 248/399-8000 • FAX:248/399-7246 • www.tr erice.com
6/1/2001
25
Tank Thermostat 91000XT Series
for Oil Field Heaters,Treaters & Separators
The 91000XT Tank Thermostat is especially
designed to control the temperature of heaters,
treaters and separators within the petroleum
industry. It is entirely self-contained, requires no
external power source, and is the most widely
preferred unit of its kind. When installed in a treater,
the normally open valve will automatically close off
the flow of gas as temperature increases, thereby
regulating temperature within the treater. The
Trerice 91000XT is ruggedly constructed with a
heavy duty, die cast aluminum actuator housing. Its
single seated, cast-iron valve body is fitted with a
stainless steel plug assembly and soft seating Viton
o-ring to provide tight shut-off.
Warning: This valve may only be installed in outdoor
applications.The Teflon v-ring packing will allow
fugitive emissions to escape.Improper application may
cause failure of the valve, resulting in possible personal
injury or property damage.
For applications where the process media may be
corrosive or contained under pressure, the use of a
thermowell is required to prevent damage to the sensing
bulb and facilitate its removal from the process.
Self-Operating
Design
Heavy Duty
Die Cast
Aluminum
Housing
3
/4" and 1 NPT
Valve Sizes
Soft Seated
Valve for Tight
Shut-Off
Model
91000XT
Power Requirements
Fully self-contained –
no external power required
Housing
Die cast aluminum, epoxy
powder coated blue finish
Set Point Scale
Intergral to housing
Bellows
High pressure brass, corrosion
resistant, tin plated finish
Adjustment Screw
Brass
Adjustment Screw Bushing
Lubricant impregnated sintered
bronze
Range Adjustment Spring
Cadmium plated
Overrange Protection
Upper range limit +100°F for
temporary situations
Thermal System
Bulb: Copper, .80" x 8", with
union connection for thermowell
Capillary: Copper, available in
10' or 20' lengths
Thermowell
Steel, 1 NPT connection
Valv e
Single seat, normally open
Body: Cast-iron
Trim: Stainless steel plug
assembly with soft seating
Viton o-ring, iron seat
Port Size:
1
/2"
Connection:
3
/
4
NPT or 1 NPT
threaded ends
Approximate Shipping
Weight
10.3 lbs [4.68 kg]
Sample Order Number: 91000XTCX011002-X75
91000XT C X01 10 02 X75
Model Level of Assembly Range Capillary Length Thermowell – Valve Size
91000XT A Actuator Only See Standard 10 10 Feet 02 Steel Thermowell X753/4NPT
C Complete Thermostat Available Ranges 20 20 Feet Omit if None X10 1 NPT
(over) Omit if
Actuator Only
How to Order
Specifications
91000XT pictured
Temperature Regulators