Control Products 900Y2F User Manual
- 414 -
900Y SERIES
STRAINERS
900Y SERIES
CARBON STEEL, STAINLESS STEEL
Y STRAINERS
FLANGED, RING JOINT, BUTTWELD
PRESSURES TO 2220 PSIG (153 BARG)
T
EMPERATURES TO 800°F (427°C)
● ANSI 900 PSIG rated strainers
● RF or RTJ Flanges, and Buttweld in accordance with
ANSI 16.34 and 16.5
● SSI Exclusive – Body blow down flange and cover
flange dimensions are in dimensional accordance with
ANSI B16.5.
● All Flanged connections complete with Bolted Cover
● One piece cast body
● Upper and lower machined seats
● Generous screen area and properly proportioned
straining chamber to minimize initial pressure drop
while maximizing time between cleanings
● Drain/Blow-off connection furnished with plug
MODELS
●900Y2F – Carbon or Stainless Steel Flanged with Bolted Cover
● 900Y2J – Carbon or Stainless Steel Ring Joint with Bolted Cover
APPLICA TIONS
●Steam, liquid, gas and oil service
●Power industry
●Pulp and paper
●Chemical industry
●Process Equipment
●Metal & Mining
●Water & Waste
OPTIONS
●Other perforated screens and mesh liners
● Drain connections and other gasket materials
● Oxygen cleaning
● Special internal / external coatings and linings
● Contact Factory for other Options
APPLICABLE CODES
●ANSI B16.5
● ANSI B16.34
Canadian Registration OE A72.2 6"900Y2
0800-900Y2BC-4____
12345678910111213141516
Add’l
Inlet Size Dash Model Body Dash Perf Mesh Require-
Material ments
900Y Series Ordering Code
Model - Position 6 - 11
900Y2F
900Y2J
Body Material - Position 12
C - CS
T - SS
Dash - Position 13
Perf1- Position 14
304SS Material
2
A - No Perf
1 - 1/32"
B - 3/64"
4 - 1/8"
2 - 1/16"
3 - 3/32"
5 - 5/32"
6 - 3/16"
7 - 7/32"
8 - 1/4"
9 - 3/8"
Mesh2 - Position 15
Leave Blank
If not Required
(std ALL)
1 - 10
2 - 20
3 - 30
4 - 40
5 - 50
6 - 60
7 - 80
8 - 100
9 - 120
1. Standard Screens:
All <3"—3/64" perf,
All >3"—1/8" perf.
Add’l Requirements -
Position 16
Leave Blank
If not Required
D - Special Drain Size
F - Silicon Free
G - Special Gaskets
N - Nace MR01-75
T - Special Testing
X - Oxygen Cleaning
Y - Other and / or
Multiple Specials
Indicate Specials
Clearly On the Order
Inlet Size -
Position 1 - 4
0200 - 2"
0250 - 2
1
⁄2"
0300 - 3"
0400 - 4"
0600 - 6"
0800 - 8"
Dash -
Position 5
NOTE: 900# flanges are the same as 1500# flanges in sizes 1/2" - 21⁄
2".
2. For other screen
material, contact
factory.
For Buttweld connections see FY Series on page 424
- 415 -
900Y2 SERIES
STRAINERS
PRESSURE/TEMPERATURE CHART
ASME B16.34
Connections:
CS - 2" to 8" RF Flanged or RTJ
SS – 2" to 8" RF Flanged, RTJ
SCREEN OPENINGS
STANDARD
SIZE SCREEN MATERIALS
2" – 3" 3/64" Perf 304 SS
4" – 8" 1/8" Perf 304 SS
900Y2 SERIES
CARBON STEEL, STAINLESS STEEL
Y STRAINERS
FLANGED, RING JOINT, BUTTWELD
SPECIFICATION
Y Strainer shall be straight flow design with RF Flanged, Ring Joint or
Buttweld inlet/outlet connections. The strainer shall be rated to ANSI 900
PSIG rating in accordance with ANSI B16.5 or B16.34. The Strainer shall
be Cast Carbon Steel or Stainless Steel body and the screen shall be size
______ perf 304 SS. The strainer shall be have an inlet size of ______ and
Open Area Ratio of _______. The Y Strainer shall be SSI 900Y2 Series.
M
ATERIALS OFCONSTRUCTION
Part Carbon Steel Stainless Steel
Body A216-WCB A351-CF8M
Cover A216-WCB A351-CF8M
Screen
1
304 SS 304 SS
Plug
2
A105 304 SS
Gasket
1
304 SS Spiral Wound 304 SS Spiral Wound
Stud A193-B7 A320-B8
Nut
2
A194-2H A194-8
1. Recommended Spare Parts
2. Materials of equivalent strength may be substituted
SIZE A B C D WEIGHT
216
1
⁄
4 10
1
⁄
2 14
7
⁄
8 1.87 125
(50) (413) (268) (378) (48) (57)
320
1
⁄
4 12
3
⁄
4 18 2.87 163
(80) (514) (324) (457) (73) (74)
423
1
⁄
4 15 21
1
⁄
4 3.87 253
(100) (541) (381) (539) (98) (115)
627
3
⁄4 187⁄8 265⁄8 5.75 580
(150) (705) (480) (667) (146) (263.6)
834
1
⁄2 225⁄8 32 7.50 1080
(200) (876) (575) (813) (191) (490.9)
DIMENSIONS inches (mm)
AND WEIGHTS pounds (kg)
Dimensions shown are subject to change.
Contact factory for certified prints when required.
C
A
D
B
N.P.T.
OPTIONAL
†
†
SSI Series 900Y strainers are not furnished
with a drain/blow-down connection. Consult
factory if required.
For Buttweld connection use FY Series on page 424
Loading...