Page 1
- 193 -
MOORE
POSITIONER
MOORE 760P POSITIONER
ON INTIMIDATOR TYPE J CONTROL VALVE
MOORE 760P PNEUMATIC POSITIONER
APPLICA TION DATA
●Control of Intimidator, Boss & Doctor Control Valves
●Split Range for Parallel Stations
●Fine Tune Control
●Where Required Air Pressure is Greater than Controller Output
●Where Change of Actuator Action is Desired (Reverse to Direct
& vice versa)
RATINGS
Temperature Range ………-40 to 185°F
(-40 to 85°C)
Pneumatic Connections …1/4" NPT
Gauge Connections ………1/8' NPT
Electrical Connections ……3/4" NPT
Exhaust Connections ……1/4" NPT
Action ………………………Direct or Reverse
Supply Pressure …………60 psig
Air Consumption, Typical …0.5 scfm
Input Signal ………………3-15 psig, Split Range, 4-20 mA*
Span ………………………Adjustable, -60% to +25% of normal
Zero…………………………Adjustable, -10% to +60% of normal
Linearity, Typical……………0.5% of normal span
0.75% of normal span*
Hysteresis, Typical…………0.75% of normal span
1.0% of normal span*
Deadband …………………<
0.25% of span
APPLICABLE CODES
NEMA 4X, IP 65
FM, CSA, CENELEC, Sira Approved
*Applies to 760EP only
MOORE POSITIONER
●Pneumatic or Electro-Pneumatic
●Modular Design
●Cam Characterized for Added Tur ndown
●Gauges Included
●Proportional Control
●Easy to Calibrate
●Non-Interacting Zero and Span
●Mounts compactly on Valve
●Provides Precise Control
O
PTIONS
●Mechanical Limit Switch
●Proximity Limit Switch
●4-20 mA Position Transmitter Feedback
●Potentiometer 1K Feedback
MODELS
760P Pneumatic Positioner
760EP Electro-pneumatic Positioner w/Integral I/P
Transducer
S
PECIFICATION
The Positioner shall be modular and cam characterized with
NEMA 4X, FM, CSA, CENELEC and Sirs certifications and
shall be mounted directly onto the valve. Feedback, I/P
Transducer and/or Limit Switch options shall be available.
The Positioner shall include gages,have non-interacting zero
and span and consume 0.5 to 0.6 scfm.
Loading...