INDUSTRIAL
Storage, Expansion, Air Separation, Distribution
INDUSTRIAL
For Hot or Cold Water, Glycol Mixtures or Thermal Fluids
with Manhole*
PARKER TANKS
ASME Construction
Air SeparatorVertical Tank
Horizontal Tank
with Manhole* and
optional Saddles
PARKER TANKS
For more than 50 years, Parker has
manufactured a quality line of Tanks and Heat
Exchangers for all types of volume water
heating applications. The tanks are commonly
used for hot water storage or thermal
expansion and air separation in circulating
systems or as distribution tanks for thermal
fluid systems.
PARKER BOILER CO.
5930 Bandini Boulevard
Los Angeles, CA 90040
Tel (323) 727-9800
Fax (323) 722-2848
www.parkerboiler.com
BROCHURE 500-14 0L5
FEATURES
• All Parker Tanks are manufactured in
accordance with the ASME unfired
pressure vessel code and registered with
the National Board of Boiler & Pressure
Vessel Inspectors.
• Standard paint is an attractive and durable
protective enamel finish.
• Special guaranteed internal tank linings
available at nominal cost.
• Wide range of sizes to standard
specifications or special design.
• Available as vertical or horizontal type.
Legs standard on vertical tanks.
• Air Separators for hot water systems
are available in threaded or flanged
connections.
• Thermal Fluid distribution systems are
available for two pump thermal systems.
*Manhole is optional unless diameter
of tank is 42” or larger and/or is cement
lined.
"Never a Compromise for Quality or Safety"
500-14 Tanks, Heat Exchangers
INDUSTRIAL
PARKER HEAT EXCHANGERS
INDUSTRIAL
ASME Construction
For Steam or Water
Vertical Storage Tank
with Heat Exchanger,
Temperature Regulator &
By-Pass Assembly with
Accessories
Tank Heater Bundle/Heat Exchanger
PARKER HEAT EXCHANGERS
The Parker Heat Exchanger is designed to be
used with a Storage Tank for heating water with
a Steam or Hot Water Boiler. The exchangers
are widely used for economically meeting the
hot water requirements in commercial and
industrial applications including:
- Restaurant & Food Processing Industries
- Commercial & Industrial Laundries
- Hospitals & Institutions
- Schools, Gymnasiums & Clubs
- Hotels, Motels & Apartment Houses
- Office Buildings & Factories
500-14 Tanks, Heat Exchangers
"Never a Compromise for Quality or Safety"
FEATURES
• Heat Exchangers come standard with
copper tubes and are available with bronze
bonnet and tube sheets.
• Also available with Cupper/Nickel or
Stainless Steel tubes and Stainless Steel
tube sheets; and double wall Copper or
CU/NI.
• Flexibly designed to permit free expansion
of each tube.
• Heat Exchangers are securely bolted in
place and easy to remove for inspection or
servicing.
• Heat Exchangers are available from 4" up
to 24" in diameter
• All construction in compliance with ASME
code.
• Available with temperature regulator
and accessories needed for ease of
installation.
PARKER BOILER CO.
5930 Bandini Boulevard
Los Angeles, CA 90040
Tel (323) 727-9800
Fax (323) 722-2848
www.parkerboiler.com
BROCHURE 500-14 0L5
Loading...