Control Products 150B2F User Manual
- 448 -
150B2 SERIES
BASKET STRAINERS
APPLICA TIONS
●Water, Oil Systems
●Other Liquid Systems
●Protection of Pumps, Meters, Valves and
Similar Equipment
0400-150B2FC-4____
12345678910111213141516
Add’l
Inlet Size Dash Model Body Dash Perf Mesh Require-
Material ments
150B2 Series Ordering Code
Inlet Size -
Position 1 - 4
0150 - 1
1
⁄2"
0200 - 2"
0300 - 3"
0400 - 4"
0600 - 6"
0800 - 8"
Dash - Position 5
Model - Position 6 - 11
150B2F - Straight Flow
Body Material - Position 12
C - Carbon Steel
T - Stainless Steel
Dash - Position 13
Perf1- Position 14
304 SS Material
2
B - 3/64"
4 - 1/8"
A - None
1 - 1/32"
2 - 1/16"
3 - 3/32"
5 - 5/32"
6 - 3/16"
7 - 7/32"
8 - 1/4"
9 - 3/8"
Z - Other
Mesh2- Position 15
Leave Blank
If not Required
(Std. all)
1 - 10
2 - 20
3 - 30
4 - 40
5 - 50
6 - 60
7 - 80
8 - 100
9 - 120
Z - Other
PRESSURE/TEMPERATURE CHART
ASME B16.34
150B2 SERIES
CAST CARBON STEEL, STAINLESS STEEL
FLANGED BASKET STRAINERS
PRESSURES TO 285 PSIG (19.7 BARG)
T
EMPERATURES TO 800°F (427°C)
●SSI Exclusive - Cover flange is in dimensional
accordance with ASME B16.5
●Over the top flow and machined basket seat eliminate
any chance of dirty fluid bypass
●Large screen area minimizes pressure drop and
cleaning intervals
●RF flanges in accordance with ASME B16.5
●Stainless steel perforated baskets are standard
●Recommended minimum straining level is 40 microns
●NPT drain connection furnished with plug as standard
MODELS
●150B2F - Over the top flow
OPTIONS
●Other screen perforations and mesh liners
●Quick Opening Covers -
APPLICABLE CODES
●ASME B16.5, B16.34
Canadian Registration OE 1972.23-150B2F
1. Standard screens All 11⁄2"— 1/32" perf, All 2"-3"—3/64" perf, All 4"-8" — 1/8" perf.
2. For other screen material, contact factory.
For any variations, use the part numbering system above but clearly indicate the additional requirement.
Add’l Requirements -
Position 16
Leave Blank
If not Required
D - Special Drain Size
E1 - 1/4" Vent
E2 - 3/8" Vent
E3 - 1/2" Vent
F - Silicon Free
G - Special Gaskets
N - Nace MR01-75
T - Special Testing
V1- Clamp Cover
X - Oxygen Cleaning
Y - Other and / or
Multiple Specials
Indicate Specials
Clearly On the Order
See page 467
For Quick Opening Covers Ratings See page 467
- 449 -
150B2 SERIES
BASKET STRAINERS
Connections: 11⁄2"- 8" RF Flanged
SCREEN OPENINGS
STANDARD
SIZE SCREEN MATERIALS
1
1
⁄2" 1/32 Perf. 304 SS
2" - 3" 3/64 Perf. 304 SS
4" - 8" 1/8 Perf. 304 SS
150B2 SERIES
CAST CARBON STEEL, STAINLESS STEEL
FLANGED BASKET STRAINERS
SPECIFICATION
Basket Strainer shall have over the top flow with a machined basket seat.
The Basket Strainer shall be cast steel or stainless steel with 150 PSIG ANSI
rated RF flanges. The cover flange dimensions shall be in dimensional
accordance with ASME B16.5. The screen shall be size _____ perforated
stainless steel. The Strainer shall have an inlet size of _____ and open area
ratio of _____. The Basket Strainer shall be SSI 150B2 Series.
M
ATERIALS OF CONSTRUCTION
Item Carbon Steel Stainless Steel
Body A216-WCB A351-CF8M
Cover A216-WCB A351-CF8M
Screen
1
304 SS 304 SS
Plug
2
A105 304 SS
Gasket
1
304 SS Spiral Wound
3
304 SS Spiral Wound
3
Bolt/Stud
2
A193-B7 A320-B8
Nut
2
A194-2H A194-8
1. Recommended Spare Parts
2. Materials of equivalent strength may be substituted.
3. Gasket for bolted cover.
ABCD*EFG
H WEIGHT
SIZE
NPT
Cover Unit
11⁄2 11⁄2 91⁄2 43⁄4 101⁄4 67⁄8 37⁄16 131⁄21⁄2 530
(40) (38) (241) (121) (260) (175) (87) (343) (15) (2.3) (13.6)
2210
1
⁄2 51⁄4 1113⁄16 83⁄16 41⁄8 155⁄83⁄4 746
(50) (51) (267) (133) (300) (208) (105) (397) (20) (3.2) (20.9)
3313
1
⁄8 69⁄16 159⁄16 113⁄16 53⁄8 193⁄4 11778
(80) (76) (333) (167) (395) (284) (137) (502) (25) (7.7) (35.5)
4417
1
⁄4 87⁄8 161⁄8 117⁄16 611⁄16 203⁄4 2 20 114
(100) (102) (438) (225) (410) (291) (170) (527) (50) (9.1) (51.8)
6619
5
⁄8 107⁄8 259⁄16 195⁄16 10 311⁄8 2 45 241
(150) (152) (498) (276) (649) (491) (254) (791) (50) (20.5) (109.5)
8 8 27 145⁄8 357⁄16 2715⁄16 125⁄16 421⁄4 2 70 432
(200) (203) (686) (371) (900) (710) (313) (1073) (50) (31.8) (196.4)
DIMENSIONS inches (mm) AND WEIGHTS pounds (kg)
*For models with Quick Opening Cover, consult factory. Allow clearance for bottom
drain bolt removal.
Dimensions shown are subject to change. Consult factory for certified drawings.
For Quick Opening Covers,
see page 467
Loading...