Page 1
- 418 -
1500Y SERIES
STRAINERS
1500Y SERIES
CARBON STEEL, STAINLESS STEEL,
CHROME MOLY Y STRAINERS
NPT, FLANGED, RING JOINT,
SOCKETWELD, BUTTWELD
P
RESSURES TO 3705 PSIG (258.5 BARG)
T
EMPERATURES TO 800°F (426°C)
● ANSI 1500 PSIG rated strainers
● NPT, RF or RTJ Flanges, Socketweld and Buttweld in
accordance with ANSI 16.34 and 16.5
● SSI Exclusive – Body blow down flange and cover
flange dimensions are in dimensional accordance with
ANSI B16.5.
● All Flanged connections complete with Bolted Cover
● One piece cast body
● Upper and lower machined seats
● Generous screen area and properly proportioned
straining chamber to minimize initial pressure drop
while maximizing time between cleanings
● Drain/Blow-off connection furnished with plug
MODELS
●1500Y1T – Carbon or Stainless NPT with Threaded Cover
● 1500Y1W – Carbon or Stainless Socketweld with Threaded Cover
● 1500Y2T – Carbon, Stainless or Chrome Moly NPT with Bolted Cover
● 1500Y2W – Carbon, Stainless or Chrome Moly Socketweld with Bolted
Cover
● 1500Y2F – Carbon or Stainless Flanged with Bolted Cover
● 1500Y2J – Carbon or Stainless Ring Joint with Bolted Cover
APPLICA TIONS
●Steam, liquid, gas and oil service
●Power industry
●Pulp and paper
●Chemical industry
●Process Equipment
●Metal & Mining
●Water & Waste
OPTIONS
● Chrome Moly bodies available on Y2T and
Y2W models
● Other perforated screens and mesh liners
● Drain connections and other gasket materials
● Oxygen cleaning
● Special internal / external coatings and linings
● Contact Factory for other Options
APPLICABLE CODES
● ANSI B16.5
● ANSI B16.34
Canadian Registration:
OE0495.90-1500 Y1T, Y2TC
OE1972.2-1500 Y2TC
OE5779.5-1500 Y2T
0150-1500Y2TR-3____
1234567891011121314151617
Add’l
Inlet Size Dash Model Body Dash Perf Mesh Require-
Material ments
1500Y Series Ordering Code
Model - Position 6 - 12
1500Y1T
1500Y1W
1500Y2T
1500Y1W
1500Y2F
1500Y2J
Body Material -
Position 13
C - CS
T - SS
R - CM
Dash - Position 14
Perf1- Position 15
304SS Material
2
A - No Perf
1 - 1/32"
B - 3/64"
4 - 1/8"
2 - 1/16"
3 - 3/32"
5 - 5/32"
6 - 3/16"
7 - 7/32"
8 - 1/4"
9 - 3/8"
Mesh2 -
Position 16
Leave Blank
If not Required
(std ALL)
1 - 10
2 - 20
3 - 30
4 - 40
5 - 50
6 - 60
7 - 80
8 - 100
9 - 120
1. Standard Screens:
Y1T and Y2T
1
⁄2"-11⁄2"—1/32" perf,
Y2 2"-6"— 1/8" perf.
Add’l Requirements -
Position 17
Leave Blank
If not Required
D - Special Drain Size
F - Silicon Free
G - Special Gaskets
N - Nace MR01-75
T - Special Testing
X - Oxygen Cleaning
Y - Other and / or
Multiple Specials
Indicate Specials
Clearly On the Order
Inlet Size -
Position 1 - 4
0200 - 2"
0250 - 2
1
⁄2
"
0300 - 3"
0400 - 4"
0600 - 6"
Dash -
Position 5
2. For other screen
materials, contact
factory.
For Buttweld connections see FY Series on page 424
Page 2
- 419 -
1500Y1 SERIES
STRAINERS
PRESSURE/TEMPERATURE CHART
ASME B16.34
Connections:
CS - 1⁄
2" to 1" NPT or Socketweld
SS –
1
⁄
2" to 1" NPT or Socketweld
SCREEN OPENINGS
STANDARD
SIZE SCREEN MATERIALS
1
⁄2" – 1" 1/32" Perf 304 SS
1500Y1 SERIES
CARBON STEEL, STAINLESS STEEL
Y STRAINERS
NPT, SOCKETWELD
SPECIFICATION
Y Strainer shall be straight flow design with NPT or Socketweld inlet/outlet
connections. The strainer shall be rated to ANSI 1500 PSIG . The Strainer
shall be Cast Carbon Steel or Stainless Steel body and the screen shall be
size ______ perf 304 SS. The strainer shall have a threaded cover. The
strainer shall be have an inlet size of ______ and Open Area Ratio of
_______. The Y Strainer shall be SSI 1500Y1 Series.
M
ATERIALS OFCONSTRUCTION
Part Carbon Steel Stainless Steel
Body A216-WCB A351-CF8M
Cap
2
A216-WCB A351-CF8M
Screen
1
304 SS 304 SS
Plug
2
A105 A182-316
Gasket
1
304 SS Spiral Wound 304 SS Spiral Wound
1. Recommended Spare Parts
2. Materials of equivalent strength may be substituted
SIZE A B C D E WEIGHT
1
⁄2 315⁄16 39⁄16 55⁄16
7
⁄8
1
⁄4 2.4
(15) (100) (90) (135) (22.23) (8) (1.1)
3
⁄4 41⁄4 315⁄16 511⁄16
3
⁄8 3.3
(20) (108) (100) (127) (27.05) (10) (1.5)
154
23
⁄32 71⁄2 11⁄3
1
⁄2 6.0
(25) (127) (120) (178) (33.78) (15) (2.7)
DIMENSIONS inches (mm)
AND WEIGHTS pounds (kg)
Dimensions shown are subject to change.
Contact factory for certified prints when required.
E N.P.T.
Page 3
- 420 -
1500Y2 SERIES
STRAINERS
Connections:
CS – 1/2" to 2" NPT or Socketweld
SS – 1/2" to 2" NPT or Socketweld
CM –1/2" to 2" NPT or Socketweld
SCREEN OPENINGS
STANDARD
SIZE SCREEN MATERIALS
1
⁄2" – 11⁄2" 1/32" Perf 304 SS
2" 3/64" Perf 304 SS
1500Y2 SERIES
CARBON STEEL, STAINLESS STEEL
CHROME MOLY Y STRAINERS
NPT, SOCKETWELD
SPECIFICATION
Y Strainer shall be straight flow design with NPT or Socketweld
inlet/outlet connections. The strainer shall be rated to ANSI 1500 PSIG
. The Strainer shall be Cast Carbon Steel or Stainless Steel body and the
screen shall be size ______ perf 304 SS. The strainer shall have a
bolted cover . The strainer shall be have an inlet size of ______ and Open
Area Ratio of _______. The Y Strainer shall be SSI 1500Y2 Series.
MATERIALS OF
CONSTRUCTION
Part Cabon Steel Stainless Steel Chrome Moly
Body A216-WCB A351-CF8M A217-WC6
Cover
2
A216-WCB A351-CF8M A217-WC6
Screen
1
304 SS 304 SS 304 SS
Gasket1304 SS 304 SS 304 SS
Spiral Wound Spiral Wound Spiral Wound
Stud A193-B7 A193-B8-1 *
Nut A194-2H A194-8 *
* For Chrome Moly materials of construction contact factory.
1. Recommended Spare Parts
2. Materials of equivalent strength may be substituted
SIZE A B C D WEIGHT
1
⁄
2 3
15
⁄
16 5
1
⁄
8 6
1
⁄
2
7
⁄
8 7
(15) (100) (130) (165) (22) (3.2)
3
⁄
4 4
1
⁄
4 5
29
⁄
32 7
3
⁄
32 1
1
⁄
8 11
(20) (108) (150) (180) (29) (5)
156
11
⁄16 815⁄32 15⁄16 15
(25) (127) (170) (215) (33) (6.8)
11⁄4 83⁄8 71⁄16 85⁄8 111⁄16 22
(32) (213) (179) (219) (43) (10)
11⁄2 83⁄8 71⁄16 85⁄8 115⁄16 22
(40) (213) (179) (219) (49) (10)
29
3
⁄8 77⁄8 10 27⁄16 26
(50) (238) (200) (254) (62) (11.8)
DIMENSIONS inches (mm)
AND WEIGHTS pounds (kg)
Dimensions shown are subject to change.
Contact factory for certified prints when required.
C
CLEARANCE
FOR SCREEN
REMOVAL
B
A
D
1500Y2 NPT/SW strainers are not furnished
with a drain/blow down connection.
If required consult factory.
PRESSURE/TEMPERATURE CHART
ASME B16.34
Page 4
- 421 -
1500Y2 SERIES
STRAINERS
Connections:
CS - 2" to 6" RF Flanged or RTJ
SS – 2" to 6" RF Flanged or RTJ
SCREEN OPENINGS
STANDARD
SIZE SCREEN MATERIALS
2" – 3" 3/64" Perf 304 SS
4" – 6" 1/8" Perf 304 SS
1500Y2 SERIES
CARBON STEEL, STAINLESS STEEL
Y STRAINERS
FLANGED, RING JOINT, BUTTWELD
S
PECIFICATION
Y Strainer shall be straight flow design with RF Flanged, Ring Joint or
Buttweld inlet/outlet connections. The strainer shall be rated to ANSI 1500
PSIG rating in accordance with ANSI B16.5 or B16.34. The Strainer shall
be Cast Carbon Steel or Stainless Steel body and the screen shall be size
______ perf 304 SS. The strainer shall be have an inlet size of ______ and
Open Area Ratio of _______. The Y Strainer shall be SSI 1500Y2 Series.
M
ATERIALS OF
C
ONSTRUCTION
Part Carbon Steel Stainless Steel
Body A216-WCB A351-CF8M
Cover A216-WCB A351-CF8M
Screen
1
304 SS 304 SS
Plug
2
A105 304 SS
Gasket
1
304 SS Spiral Wound 304 SS Spiral Wound
Stud A193-B7 A320-B8
Nut
2
A194-2H A194-8
1. Recommended Spare Parts
2. Materials of equivalent strength may be substituted
SIZE A B C D WEIGHT
216
1
⁄4 101⁄2 147⁄8 17⁄8 125
(50) (413) (268) (378) (48) (56.7)
21⁄2 193⁄8 133⁄8 141⁄2 21⁄4 142
(65) (492) (340) (368) (57) (64.6)
322
1
⁄4 141⁄2 201⁄2 23⁄4 243
(80) (565) (368) (521) (73) (110.2)
425
1
⁄4
16
3
⁄8
23 3
5
⁄8
388
(100) (641) (416) (584) (92) (176)
63221
3
⁄4 301⁄2 53⁄8 817
(150) (813) (551) (775) (137) (370.6)
DIMENSIONS inches (mm)
AND WEIGHTS pounds (kg)
* Consult factory for dimensions
Dimensions shown are subject to change.
Contact factory for certified prints when required.
PRESSURE/TEMPERATURE CHART
ASME B16.34
C
A
D
B
E N.P.T.
OPTIONAL
†
†
1500Y2 strainers are not furnished with a
drain/blowdown connection. If required consult
factory.
For Buttweld connection use FY Series on page 424
Loading...