Page 1
DOLKWP318LIPSQ
318 MHz Keypad
Page 2
Programming the Keypad
The keypad will shut down for approx. 40 seconds if your entry code is not correct
within a string of 18 digits. This will discourage an unauthorized person from trying
use random numbers to access your property.
STEP 1:
1. Disconnect the power by remove the battery.
2. Press 3 6 9 keys simultaneously.
3. Power up the keypad again.
4. Release 3 6 9 keys.
5. Return to default Master Code 1 2 3 4
6. Clean all User Entry Code.
Return to Default Setting
STEP 2: Programming the Master Code
1. Enter the “Master Code” (default is )
2. Press the button.
3. Enter for change code.
4. Enter for Master Code.
5. Enter the new “Master Code”
6. Press the button.
7. If multi-color status LED flash 3 times with green color. Meant code repeated.
*
1
0 0
*
1
432
STEP 3: Programming the User Entry Code
1. Enter the “Master Code” (default is )
2. Press the button
3. Enter for change code
4. Enter for the number of user code (eg. “03” for the third user code, etc).
5. Enter the new “User Enter Code”(4 digits)
6. Press the button.
7. If multi-color status LED flash 3 times with green color. Meant code repeated.
*
1
0 1
*
1
432
Page 3
Preset Factory Codes
User Enter Code 2 3 4 5
(Note: To reset the access code remove 9 volt battery form unit, Depress any key
on the keypad and wait 10 seconds before installing battery.
Send a signal to channel 1 of TX module:
Send a signal to channel 2 of TX module:
Send a signal to channel 3 of TX module:
Send a signal to channel 3 of TX module:
Delete the Programmed User Entry Code
1. Enter the “Master Code” (default is )
2. Press the button
3. Enter 2 for delete a user code
4. Enter for the number of user code (eg. “03” for the third user code, etc).
5. Press the button.
Multi-color Status LED
ORANGE - Key Depressed
RED - Entered Correct Code and Transmitting
GREEN - Programming Mode
GREEN FLASHING (3 times) - Error During Programming Mode
*
1
0 1
*
1
2 3 4 5
(access code)
# 2 3 4 5 - 2
(access code)
# 2 3 4 5 - 3
(access code)
# 2 3 4 5 - 4
(access code)
432
Page 4
Loading...