Control Company TWO-MEMORY TIMER User Manual

TRACEABLE® TWO-MEMORY TIMER INSTRUCTIONS
OPERATING INSTRUCTION:
To Set Clock
1) 12 Hour AM/PM format or 24 Hour International time user-selectable. Slide switch to CLOCK. Press 12HR 24HR button for desired format.
2) Depress HR, MIN, SEC buttons to actual time. Slide switch to LOCK mode after setting.
In CLOCK mode, press once to start count-up function, second press is to pause. Third press to restart. Press CLEAR after pausing will
reset digits to 00:00:00.
To Set Timer
1. Slide switch to T1 for TIMER 1, T2 for TIMER 2. After selecting which timer is to set, press HR, MIN, SEC for desired timing period. Press
MEMORY afterwards (The word “MEMORY” will display) will enter the timing period into memory. Press CLEAR after MEMORY is pressed, the digits will be reset to 00:00:00. Recall memory before setting timing period (press MEMORY in T1 or T2 mode), saving resetting effort of the same timing cycle. After setting timing period, slide switch to LOCK mode.
2. Press
to start timer, second press to pause timer, third press is to restart.
3. Press CLEAR after pausing will reset digits to 00:00:00. The timer will count up from 00:00:00 to tell you how long since the alarm sounded
(the timing cycle is ended) To stop alarm sound or count-up, press
4. You can have both timer working simultaneously. After setting different timing cycle for each timer and start timing, slide switch to T 1 2 to
have both timers display.
* Count-up or timer count-down functions can only be started in LOCK mode.
Warranty, Service, or Recalibration
For warranty, service, or recalibration, contact:
CONTROL COMPANY
4455 Rex Road
Friendswood, Texas 77546 USA
Ph. 281-482-1714 Fax 281-482-9448
E-mail sales@control3.com
www.control3.com
Control Company is ISO 9001 Quality-Certified by DNV and ISO 17025 accredited as a Calibration
Laboratory by A2LA.
Rev. 1 010308
Control Company Cat. No. 5006 Traceable® is a registered trademark of Control Company
© 2008 Control Company
Loading...