Control Company STICK THERMOMETER User Manual

TRACEABLE

®

STICK™ THERMOMETER INSTRUCTIONS

INSTALL AT ION INSTRUCTIONS

1) Probe sensor: Place the submer sibl e probe inside the tank
and press the suction cup again st the inner wall. Choose a
position which is less affect ed by li ght or plant for more
reliable readout.

2) Unit: Remove the protective paper of the double-side d tape
and press the unit against any clea n surf ac e for mounting.

OPERATI NG INSTRUCTIONS

1) Temperature readouts will display after battery is inse rt ed.

2) Press MAX-MIN MEMORY button will display maximum and
minimum, readouts of room t em perat ure. Second press will
display maximum and mini m um readout s of wat er
temperature. Third pre ss, or af ter 8 seconds the display will
show current temperat ure readout.

3) If you press CLEAR after maximum or mi ni mum temperature

readout is recalled from t he recor d, you will start a new
memory record and the old one i s erased.
Maximum/Minim um t em perat ure i s the Hi ghest/Lowest
temperature readout as picked up from the accumulated
temperature readout s. T hus yo u can sp ecif y, HOURLY,
DAILY, WEEKLY, MO NTHLY Room/Water max-min
memory record by yourself.

WARRANTY, SERVICE, OR RECALIBRATION

For warranty, service, or recalibration, contact:

CONTROL COMPANY

4455 Rex Road

Friendswood, Texas 77546 USA

Ph. 281-482-1714 Fax [phone]

E-mail [e-mail]

www.control3.com

Control Company is ISO 9001 Quality-Certified by DNV and ISO 17025

accredited as a Calibration Laboratory by A2LA.

Traceable® is a registered tradem ark of Cont rol Company ©2011 Control Company. 92-4144-00 Rev. 3 050911