Control Company CALCULATOR WITH CLIPBOARD User Manual

FEATURES

Solar Calculator with battery backup Pen with Pen Holder Tape Measure

CALCULATOR KEY FUNCTIONS

ON/CE

Press to turn the calculator on. When pressed during operation, press to clear an incorrectly entered number. Clears only the most recent entry.

ON/C

Press to turn the calculator on. When pressed during operation, clears the display to zero.

Press to clear an incorrectly entered number. Clears only the most recent entry.

OFF

Press to turn the calculator off. The memory is cleared when the calculator is turned off.

Numerals (0-9)

Use to enter numbers.

• Press to enter a decimal point.

+/−

Press to change the value of the displayed number from positive to negative, or negative to positive.

+ Press to add entries.

− Press to subtract entries.

X Press to multiply entries.

% Press to calculate a percentage.

= Press to complete the arithmetic calculation.

÷ Press to divide entries.

√ Square Root key: Press √ to calculate the square root of the displayed

number.

CALCULATOR WITH CLIPBOARD INSTRUCTIONS

M+ Memory Plus key: Press M+ to add the number being displayed to the value stored in memory.

MMemory Minus key: Press M- to subtract the number being displayed from the value stored in memory.

MR Memory Recall key: Press MR to display contents of memory. Memory remains unchanged after key operation.

MC Memory Clear key: The first press of the MC key displays the value stored in memory. The second successive press of the MC key clears the memory.

CALCULATOR DISPLAY MESSAGES

“MINUS“ – indicates the displayed number is a negative.

“MEMORY” – indicates a number is stored in memory.

“ERROR” – indicates the calculated value is too large/small to be displayed.

TAPE MEASURE

The tape measure is double sided and indicates Centimeters on one side and Inches on the other.

The tape measure will automatically lock as it is being pulled. To unlock the tape measure so that it may automatically rewind, press the button in the center of the tape measure.

NOTE: The tape measure will rewind rapidly when the button is pressed, make certain to hold the tape measure while depressing the button so that the tape measure may be retracted slowly and safely.

WARRANTY, SERVICE, OR RECALIBRATION

For warranty, service, or recalibration, contact:

CONTROL COMPANY

4455 Rex Road

Friendswood, Texas 77546 USA

Ph. 281-482-1714 Fax 281-482-9448

E-mail sales@control3.com

www.control3.com

Control Company is ISO 9001 Quality-

Certified by DNV and ISO 17025 accredited

as a Calibration Laboratory by A2LA.