Control 4 C4-WALL7-WH, C4-WALL10-BL, C4-WALL7-BL, C4-WALL10-WH Installation Manual

7" and 10" T3 Series In-Wall Touch Screen

Installation Guide

Supported models

• C4-WALL7-BL 7" T3-7 In-Wall Touch Screen, Black

• C4-WALL7-WH 7" T3-7 In-Wall Touch Screen, White

• C4-WALL10-BL 10" T3-10 In-Wall Touch Screen, Black

• C4-WALL10-WH 10" T3-10 In-Wall Touch Screen, White

Introduction

The Control4® T3-7 (7") and T3-10 (10") In-Wall Touch Screens
oer complete system control in an elegant and compact design.
The touch screens are equipped with a full capacitive screen,
audio and video Intercom (with the built-in camera) using SIP,
and more.

This touch screen works great in either new construction or
retrofit installations. For power and network connectivity, choose
from three options:

• Ethernet with PoE—The Ethernet network connection is
provided through the PoE Injector. No additional wiring is
needed.

• Ethernet with AC—Connect the touch screen to one of the
RJ-45 LAN ports on the gateway/router using the RJ-45
Ethernet cable. AC power is used to power the touch screen.

• WiFi with AC—The internal WiFi will communicate with the
LAN’s WAP. If the LAN has a WAP set up, no additional
network wiring is needed. AC power is used to power the
touch screen.

Note: 802.11b is not recommended for Video Intercom.
We recommend using Wireless-N. See “Specifications”
and “Power and Network Installation Options” for more
information.

Accessories available for purchase

• PoE. Control4 Power over Ethernet Injector, sold separately
(AC-POE1-B).

• Wall box options (sold separately)—Metal and plastic, for
new construction or retrofit installations.

• 7" and 10" In-Wall Touch Screen Wall Box Kits - New

Construction

• 7" and 10" In-Wall Touch Screens Wall Box, New
Construction, Plastic (C4-NWB57C-P)

• 7" and 10" In-Wall Touch Screens Wall Box, New
Construction, Metal (C4-NWB57C-M)

• 7" and 10" In-Wall Touch Screen Wall Box Kits - Retrofit

• 7" and 10” In-Wall Touch Screens Wall Box, Retrofit,
Plastic (C4-RWB57C-P)

• 7" and 10" In-Wall Touch Screens Wall Box, Retrofit,
Metal (C4-RWB57C-M)

For wall box installation details, see:

• 7" or 10" In-Wall Touch Screen Wall Box Installation

Guide-New Construction

• 7", or 10" In-Wall Touch Screen Wall Box Installation

Guide-Retrofit

Box contents

• 7" or 10" T3-7/T3-10 In-Wall Touch Screen

• Power box (to power the touch screen) (005-00065)

• Two screws (to attach the power box)

• Touch Screen removal tool

• Four adhesive-backed foam pads

• Warranty card

11

Warnings

Warning! The touch screen must be protected by an
external circuit breaker or a fuse rated at 6A maximum
when used in Europe.

AVERTISSEMENT ! Pour réduire le risque du feu ou de
choc électrique, n’exposez pas cet appareil à la pluie ou
à l’humidité.

Warning! Do not place the touch screen near sources of
heat or expose to direct sunlight for an extended period
of time.

AVERTISSEMENT ! Ne placez pas l’unité près des
sources de chaleur ou exposition pour diriger la lumière
du soleil pendant une période prolongée.

Warning! Install in accordance with all national, state,
and local electrical codes.

AVERTISSEMENT ! Installez selon tous les national, état,
et codes électriques locaux.

Warning! This product generates heat. The room must
have adequate ventilation or the ability to dissipate heat
eectively.

AVERTISSEMENT ! Ce produit produit de la chaleur.
La salle doit avoir à ventilation proportionnée ou la
capacité d’absorber la chaleur ecacement.

Warning! This product must be grounded in accordance
with the National Electrical Code (NEC) requirements.

AVERTISSEMENT ! Ce produit doit être fondu selon les
conditions électriques nationales de code (NEC).

Warning! Use this product only in dry locations.
AVERTISSEMENT ! Employez ce produit seulement dans

des endroits secs.

Caution! This product is for residential use only.
AVERTISSEMENT ! Ce produit est pour à l’usage

résidentiel ou commercial seulement.
Caution! Do not use pens or sharp objects to navigate

or make selections on the touch screen. To select an
item or scroll through a list, use your fingertip.

AVERTISSEMENT ! N’employez pas les stylos ou les
objets pointus pour diriger ou pour faire des choix sur
l’écran. Pour choisir un article ou un rouleau par une
liste, employez votre bout du doigt.

Caution! Improper use or installation can cause
DAMAGE OF PROPERTY.

AVERTISSEMENT ! L’utilisation ou l’installation inexacte
peut causer DAMAGE DE PROPRIÉTÉ.

Important! Using this product in a manner other than
outlined in this document voids your warranty. Further,
Control4 is NOT liable for any damage incurred with the
misuse of this product. See “Warranty.”

Important ! Utilisant ce produit en quelque sorte autre
que décrit dans ce document vide votre garantie. De
plus, Control4 n’est pas responsable d’aucun dommage
encouru avec l’abus de ce produit. Voyez que «
Warranty. »

For more information, visit the Products pages at

dealer.control4.com

.

Specifications and requirements

Specifications

Model Numbers

Screen

Network

Power supply

Operating temperature

Storage temperature

Dimensions (W × H × D)

Weight (with mid-box)

Shipping Weight

Requirements

• A controller fully installed and configured with Control4
OS2.7.0 or later.

• Control4 7" or 10" In-Wall Touch Screen custom wall box
installed. See “Accessories.”

• If using Ethernet with PoE power:

• Ethernet network installed and available that includes a

gateway/router/switch

• Control4 PoE Injector (model #AC-POE1-B) or another

third-party PoE Injector or switch (UL/ANSI certified).

• Two Ethernet CAT5/6 cables: (1) one that runs from the

Ethernet gateway/router/switch to the PoE Injector/switch
and (2) one that runs from the PoE Injector/switch to the
Ethernet connection in the touch screen’s wall box.

• If using Ethernet with AC power:

• Ethernet network installed and available that includes a

gateway/router/switch

• Access to in-wall AC power (neutral connection required)

• One Ethernet CAT5/6 cable that runs from the Ethernet

gateway/router/switch to the touch screen

• A 14-gauge electrical wire long enough to pull between

the touch screen and the power source

• If using wireless with AC power:

• Wireless network (WiFi 802.11b/g/n) installed and

available with a wireless access point (WAP). Security can
be WEP, WPA/WPA2 PSK, 801.1x EAP, PEAP.

• Access to in-wall AC power (neutral connection required)

• A 14-gauge electrical wire long enough to pull between

the touch screen and the power source

C4-WALL7-BL, C4-WALL7-WH, C4-WALL10-BL,
C4-WALL10-WH

Resolution: 1280 × 800
Camera: 720p

Ethernet or WiFi (802.11b/g/n [2.4 GHz])

Security: WEP, WPA/WPA2 PSK, 801.1x EAP, PEAP

Notes: (1) Intercom usage. 802.11b is not
recommended for Video Intercom. (2) Wireless-N
is recommended for Video Intercom. Even with
Wireless-N, broadcasting to several devices will
degrade Video Intercom response time and images.
Broadcasting to additional devices will further
degrade performance. See “Wireless Network
Limitations.”

PoE (IEEE802.3af) 13 W peak
100-240VAC, 50/60 Hz

32 ~ 104˚F (0˚ ~ 40˚C)

4 ~ 158˚F (-20˚ ~ 70˚C)

7" model: 6. 9" × 5.0" × 0.5 3" (175 × 127 × 13 mm)
10" model: 9. 4" × 6.5" × 0.53" (239 × 165 × 13 mm)
Wall box: 2 .7" × 4.1" × 2.4" (68 × 104 × 61 mm)
Power box: 2.8" × 4.5" × 1 .8" ( 71 × 114 × 46 mm)

7" mod el: 0.9 lbs. (0.41 kg)
10" model: 1.5 lbs. (0.68 kg)

7" mod el: 1. 5 lbs (0.6 8 kg)
10" model: 2.1 lbs (0. 95 kg)

2

Front view

Figure 1: Front view

C

D

Touch screen placement

BA

Place the touch screen in a convenient location at eye level,
typically near the entrance of the room, approximately 57 to 61
inches (145 cm to 155 cm) from the floor (Figure 3).

Note: Consider the camera on the panel and the height
of the people in the home who will use the camera for
Video Intercom.

Figure 3: Touch screen placement

Touch screen

AC power
(unless using PoE)

A LED—Indicates when the camera is on.
B Camera—For video intercom calls.
C Display—7" or 10" diagonal, capacitive touch screen with

1280 × 800 resolution.

D Speakers—Provide stereo audio.

Back view

Figure 2: Back view

A

A Ribbon cable-Provides data and power connection to the

touch screen from the power box.

B Mounting ring—Fits into the power box.

B

Top view

Figure 3: Top view (with power box attached)

LED indicator

The LED on the touch screen indicates the camera status of the
camera and booting information as described in the next table.

Camera/LED color state Touch screen status

O Camera is o

Green Camera is on

Green (blinking slowly) Touch screen is booting

Installation

Warning! Before installing the touch screen, switch o
the circuit breaker or remove the fuse from the fuse box.

AVERTISSEMENT ! Pour l’endroit où vous installez
l’écran tactile, coupez le disjoncteur ou enlevez le fusible
de la boîte de fusible.

Important! Before you can complete the instructions
below, you must have a 7" or 10" Touch Screen wall box
installed according to the documentation provided in
the wall box kit. See “Accessories” for details.

Important ! En coupant l’ouverture pour la boîte de
mur, ne coupez pas l’ouverture trop grande. Soyez
conservateur et agrandissez-avec précaution la comme
nécessaire. Voyez que <<Accessories>>.

Important! When cutting the opening for the wall box,
do not cut the opening too large. Be conservative and

cautiously enlarge it as needed.
Important ! En coupant l’ouverture pour la boîte de

mur, ne coupez pas l’ouverture trop grande. Soyez
conservateur et agrandissez-avec précaution la comme
nécessaire.

A C DB

A Unlabeled pinhole button—Press and hold a straightened

paper clip into this hole, then the RESET hole, to reset the
touch screen to factory defaults. Make sure you use the hole
to the left of the microphone.

B Microphone—Records audio.
C RESET pinhole button—Press after pressing the other pinhole

to reset the touch screen.

D Power button—Press to turn off the touch screen, or press and

hold to reboot.

3

Power and network installation options

This device uses an Ethernet or WiFi network connection, and
can be powered using PoE or AC power.

Choose one of the following options to install the power and
network communication.

Caution! Do not attempt to use PoE and AC power at
the same time. Choose only one power option.

ATTENTION ! Ne pas tenter d’utiliser PoE et AC en
même temps. Choisir une seule option d’alimentation.