Control 4 AVM-16A1-B Installation And User Manual
Disclaimer
Control4® makes no representations or warranties with respect to the
contents or use of this manual, and specifically disclaims any express or
implied warranties of merchantability or fitness for any particular purpose.
Control4 reserves the right to revise this publication and to make changes
to its content, at any time, without obligation to notify any person or entity
of such revisions or changes.
Control4 makes no representations or warranties with respect to any
Control4 software, and specifically disclaims any express or implied
warranties of merchantability or fitness for any particular purpose. Control4
reserves the right to make changes to any and all parts of Control4
software and hardware, at any time, without any obligation to notify any
person or entity of such changes.
Trademarks
Control4 and the Control4 logo are registered trademarks of Control4
Corporation. Other product and company names mentioned in this
document may be the trademarks or registered trademarks of their
respective owners.
Legal Notice
Gracenote. Music recognition technology and related data are provided by
Gracenote. Gracenote is the industry standard in music recognition
technology and related content delivery. For more information visit
www.gracenote.com.
Copyright
Copyright © 2004-2005 Control4. All rights reserved. No part of this
publication may be reproduced, photocopied, stored on a retrieval system,
or transmitted without the express written consent of the publisher.
Contact Us
Control4 Corporation
11734 S. Election Road, Suite 200
Salt Lake City, UT 84020 USA
http://www.control4.com
Multi Channel Amplifier - 16 Installation and User Guide
Part Number: 21-0150 Rev A Draft 3
Hardware Model Number: AVM-16A1-B
i
Contents
Preface About This Guide........................................... 1
Notes, Tips, Cautions, and Warnings .... 1
Additional Resources............................. 2
Chapter 1 Introduction to Multi Channel Amplifier - 16...3
Features and Benefits............................ 3
Home Network Requirements................ 4
What’s in the Box................................... 4
About the Multi Channel Amplifier ......... 4
Front View......................................... 4
Back View ......................................... 5
Chapter 2 Install the Multi Channel Amplifier ................. 7
Plan Your Physical Layout..................... 7
Connect Physical Components.............. 9
Set Up Logical Connections .................. 9
Chapter 3 Use Multi Channel Amplifier ........................ 11
View Output Assignments.................... 11
Manage Amplifier Output Zones .......... 12
View System Status Screen ........... 12
Use Master Volume ........................ 12
Configure Output Settings .............. 13
View Network Settings......................... 14
Set Display Preferences ...................... 15
Chapter 4 Warranty and FCC Information.................... 17
Warranty .............................................. 17
Limited Hardware Warranty ............ 17
Hardware Warranty Terms .............18
Software Agreement ....................... 21
Regulatory Compliance ....................... 22
ii
FCC Interference Statement........... 22
FCC Caution ................................... 23
Canadian EMC Statement .............. 23
1
PREFACE
About This Guide
Notes, Tips, Cautions, and Warnings
Audio Matrix Switch Installation and User Guide Note, Tip,
Caution, and Warning paragraphs draw your attention to
safe practices and additional information which may help
you avoid losing data or time.
NOTE: These contain notes on related information
about the current topic.
TIP: These provide tips that may save you time or
effort.
CAUTION! These provide specific cautions about
improper use of equipment or failure to follow safety
instructions that may cause bodily injury. DO NOT
IGNORE A CAUTION!
WARNING! These provide specific warnings about
improper use of equipment or failure to follow safety
instructions that may cause data loss or equipment
damage. DO NOT IGNORE A WARNING!
2
Additional Resources
The following resources are available to provide you with
additional support.
` Your authorized Control4 representative or
reseller.
`
Control4 Web Site: http://www.Control4.com/
3
CHAPTER
1 Introduction to Multi
Channel Amplifier - 16
Multi Channel Amplifier - 16 can operate independently or
as a device you can control with your Control4 system. It
is used when the installation requires remote placement
of amplifiers and/or special power requirements.
This Multi Channel Amplifier is intended for use in a
Control4 system and is typically used in conjunction with
the Audio Matrix Switch or a controller.
This chapter introduces the Control4 Multi Channel
Amplifier - 16 and its features.
Features and Benefits
` Receives up to 16 mono or 8 stereo inputs.
` Outputs 16 mono or 8 stereo class D amplified
channels at 100 watts per channel.
` Front display for adjusting zone settings and routing
sources (includes an LCD, supporting buttons, and a
selection dial)
` Adjustable gain, treble, and bass for each zone.
` Master Volume Control for all outputs.
` Control4 EZ ID
™
LEDs for every I/O to make
connections easy to identify.
` Device chassis is three standard rack spaces and
rack mountable configuring to EIA 19” rack standards
(its dimensions are 5.25” x 17.34” x 14”).
` Communicates via Ethernet 10/100 port and ZigBee
mesh networking (802.11.15).
` Backlighting feature turns on with any button push or
Select Dial push and stays lit for a preset time (default
is 30 seconds).
4
Home Network Requirements
Ensure that your home network wiring is in place before
starting your system setup. Multi Channel Amplifier
requires an Ethernet connection in order to be managed
and controlled from the Control4 user interfaces.
What’s in the Box
The following hardware and software is required and
included in your Control4 Multi Channel Amplifier box.
` Control4 Multi Channel Amplifier - 16
` IEC power cord
` This manual
About the Multi Channel Amplifier
Front View
1. Front Display—For displaying or setting Multi
Channel Amplifier settings and navigating
system menus. The front display is used to
view or modify audio source routing and
zone settings for volume, gain, bass, and
treble. The display also shows the current
source and zone activity.
1
2
4
5
3
5
2.
Buttons—Provides the user-input method for
options displayed in the front panel user
interface.
3.
IR Window—For reading IR signals from
devices such as a remote control.
4.
Select Dial—For scrolling through menus
and media lists displayed in the LCD.
5.
Reset Button—Troubleshooting option
behind the door to refresh the system.
Back View
1. Ethernet Port—RJ-45 for a 10/100 Baset
Ethernet connection.
2.
Audio Inputs 1-16—RCA jacks for 16 mono
or 8 stereo analog sources and their
supporting light emitting diodes (LEDs) for
EZ ID™ during setup.
3.
Amplifier Outputs 1-16—5-way binding post
for 16 mono or 8 stereo class D amplified
channels (at 100 watts per channel) and their
supporting LEDs for EZ ID™ during setup.
4.
Power Plug Port—For supplied power cord
only.
1
3
4
2
Loading...