CONTRINEX ATE 0000 010 Datasheet

ACCESSORIES

61

106

123

22

SENSOR TESTER

ATE-0000-010

ü Fast field check of various

sensor types

üLED and acoustic indicator
ü Current supply to 100 mA

ü Rechargeable battery
ü Adapted to universal

micro-USB charger

GENERAL DATA INTERFACE

Sensor supply voltage 24 VDC Indicator LED, green Supply voltage
Max. sensor supply current 100 mA Indicator LED, green (blinking) Recharge battery
Output types PNP, NPN and push-pull Indicator LED, yellow Output state
Current limit
Rechargeable battery type NiMh, Li-Ion, LiPo 9V Acoustic signal output off -> on 2’800 Hz
Standard battery type 6LR61 9V Acoustic signal output on -> off 2’400 Hz
Rechargeable battery included LiPo 9V 600 mAh
Battery life (600 mAh) > 2 hours at 50 mA
Charger type (not included) Universal mobile phone charger
Automatic switch off After ~120 seconds of non-use
Enclosure rating IP40
Weight (battery included) 96 g

AVAILABLE TYPES

Part number Part reference Description

600 000 033 ATE-0000-010 Sensor Tester with rechargeable battery LiPo 9V 600 mAh
622 000 016 AAL-0000-010 Additional rechargeable battery LiPo 9V 600 mAh

Note: additional suffix can appear to indicate a revision version or a special version.

These proximity switches must not be used in applications where the safety of people is dependent on their functioning. Terms of delivery and
rights to change design reserved.

CONTRINEX AG Industrial Electronics

ü

Route André Piller 50 - CH 1762 Givisiez - Switzerland - Tel: [phone] -

Fax: [phone] - Internet: www.contrinex.com - E-mail: [e-mail]

Micro-USB interface for charger

ü

ATE-0000-010_Rev 0_22.12.14_PYD