Contour Design RollerMouse Free3 User Manual

User Guide

Box contents

1. RollerMouse Free3

2. Two short keyboard risers

3. Two long keyboard risers

4. User Guide

1

4

2 3

B

A

C FD E

G

H

I

J

RollerMouse functions

A. Rollerbar
B. Cursor speed adjustment
C. Copy
D. Paste
E. Back
F. Forward
G. Left-click
H. Right-click
I. Scroll wheel
J. "One touch" double-click

For additional mouse features and specic Mac
settings please download our driver at
www.contourdesign.com/UK

Keyboard positioning

Before plugging in the unit take a moment to check the height and
angle of your keyboard, and nd the arrangement that's most
comfortable for you. Use the risers to achieve the correct angle and
height regardless of the type of keyboard you are using. The
spacebar on your keyboard should come just above your rollerbar. To
achieve a proper ergonomic position, the front edge of the keyboard
should be as close to the rollerbar as possible.

The Balance Keyboard is a perfect option for the Free3. Designed
specically for the RollerMouse, the Balance Keyboard sits level with
the rollerbar and can be easily adjusted to a positive, neutral, or
negative tilt.

Negative tilt Neutral tilt

Positive tilt

Inserting the keyboard risers

Fit the end of the riser into the slot on
the back of the RollerMouse Free3.

2

2

3

2

Line up the grooves of the short and long
risers and then press the two parts
together until you hear them snap into
place.

3

2

Connecting to a computer

Plug the RollerMouse Free3 USB cable into the
computer's USB port. Allow your computer a few seconds to
automatically install.

Click Force Tension Adjustment

Adjust the click force of the rollerbar by using the tension adjustment
button located on the bottom right side of the mouse.

Using the rollerbar

The rollerbar provides two functions:

Pressing down on the rollerbar
performs a left click.
Moving the rollerbar from side to side
and up and down performs cursor
movement.

A

A

Press button to change cursor speed. There are ten speed
selections which range from slow (600 DPI) to fast (2800 DPI).
Speed can be identied by the LED lights as shown.

B

B

Change cursor speed

600 DPI 800 DPI 1000 DPI 1200 DPI 1400 DPI

1600 DPI 1800 DPI 2000 DPI 2400 DPI 2800 DPI

To change button from a double click function to a middle
button function, hold buttons and for two seconds until
LED lights ashes to conrm. Repeating this process will revert
back to double click function.

B J

Adjust the user settings to best t your operating system. Use the following key
commands to switch settings. Hold button combinations for two seconds until LED
lights ash to conrm.

+ : PC Mode (Control+C, Control+V)
+ : Mac Mode (Command+C, Command+V)

J

User settings

Changing the 'Double' Click Button
to Middle Button function

B

C

B D

B

J

B

C D

For more information please visit:
www.contourdesign.com/UK

Contour Design Nordic A/S

International House
Center Boulevard 5
2300 Copenhagen S
Denmark

Phone: [phone]
Email: [e-mail]

Tested to comply with FCC standards