Continental Refrigerator SW72-30M-HGL-FB-D User Manual

SANDWICH UNIT REFRIGERATOR

Project Name:

Model: SW72-30M-HGL-FB-D

72” Mighty Top Sandwich Unit with Drawers and Hinged Glass Lid 30 Pans - Front Breathing

Stainless steel front and top, aluminum end panels, case back and interior.

Certified under NSF-7 to maintain temperatures in 86°F ambient and designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Performance-rated refrigeration system Environmentally-safe R-134a refrigerant Unique air flow distribution allows

pan product to maintain 33° - 41°F Automatic, energy saving, non-electric

condensate evaporator Non-corrosive, plasticized fin evaporator coil Easily serviceable, back mounted compressor

Options and Accessories

(upcharge and lead times may apply)

Stainless steel exterior and interior - SS models Rear-mounted cutting board Stainless steel end panels - SA models Remote models Glass doors in lieu of drawers - GD models Drawer locks Stainless steel finished back in lieu of aluminum Adjustable legs Solid doors in lieu of drawers Digital thermometer Overshelves (single or double) Crumb catcher Automatic, electric condensate evaporator Three tier drawers Expansion valve system

Consult factory for other model configurations, options and accessories.

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation Magnetic snap-in drawer gaskets 8” deep, full length nylon cutting board Stainless steel roll-out drawers 3 5/8” casters Completely enclosed, vented and removable case back Energy-efficient, 2-pane, Low-E glass lid Aluminum glass frame with satin finish Concealed lid hinges Integral stainless steel gas spring lid supports

MODEL FEATURES

(30) 1/6 size non-recessed pans, 4” deep Interior hanging thermometer

Front breathers are a unique, field assembled, bottom mounted ventilation system designed to allow cabinets to be flush against a wall or built into a counter to conserve space.

Toll-Free: 800-523-7138

Phone: 215-244-1400 Fax: 215-244-9579

539 Dunksferry Road Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specifications

DIMENSIONAL DATA

Net Capacity (cu. ft.) 20.6 (583 cu l) 1/6 Size Pans (4” deep) 30 Width, Overall (in.) 72 (1829 mm) Depth, Overall (in.)

(incl. handles & bumpers) Depth, Body Only

(less drawers) (in.) Depth, Cutting Board (in.) 8 (203 mm) Height, Overall (in.)

(incl. 3 5/8” casters) No. of Drawers (two tier) 6 No. of Drawers (three tier) 9

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/4 Capacity (BTU/Hr)* 1940

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1) Fans 4 Total Amps (int’l) 7.6 (4.7) 10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Weight (lbs.) 468 (212 kg) Height - Crated (in.) 43 1/4 (1099 mm) Width - Crated (in.) 80 1/4 (2038 mm) Depth - Crated (in.) 46 (1168 mm)

DRAWER PAN CONFIGURATIONS

Two Tier: (1) 12 x 18 x 6 pan per drawer

or (1) 1/2 size x 6 & (1) 1/3 size x 6 pans per drawer Three Tier: (1) 12 x 18 x 3 1/2 pan per drawer

or (1) 1/2 size x 4 & (1) 1/3 size x 4 pans per drawer

* Rating @ +25°F evaporator, 90°F ambient

Figures in parentheses reflect metric equivalents rounded to the nearest whole unit.

35 (889 mm)

27 1/2 (699 mm)

35 5/8 (905 mm)

FRONT VIEW

24 1/4”

(616 mm)

Model Plan Views

72”

(1829 mm)

Note: Shown with two tier drawers.

35”

(889 mm)

1”

(25 mm)

30 1/4”

(768 mm)

35 5/8”

(905 mm)

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: 215-244-1400 Fax: 215-244-9579

539 Dunksferry Road Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative products, specifications subject to change without notice.

MADE IN THE U.S.A.

SIDE VIEW

34”

(864 mm)

PAN TOP CONFIGURATION

3 5/8” (92 mm)

27 1/2”

(699 mm)

8”

(203 mm)

72”

(1829 mm)

SW72-30M-HGL-FB-D (10/8/13)