Continental Refrigerator DLUC27-SS-D User Manual

DESIGNER LINE UNDERCOUNTER

Project Name:

Model: DLUC27-SS-D

27” Undercounter Refrigerator
with Drawers

Stainless steel exterior and interior with aluminum subtop.

Designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Environmentally-safe R-134a refrigerant
Automatic, energy-saving, non-electric

condensate evaporator
Non-corrosive, plasticized fin evaporator coil
Easily serviceable back mounted compressor

Options and Accessories

(upcharge and lead times may apply)

Stainless steel back Expansion valve system
Stainless steel subtop Remote models
Glass door in lieu of drawers - GD models Drawer locks

Solid door in lieu of drawers

Automatic electric condensate evaporator

Special electrical requirements
(consult factory)

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation
Stainless steel roll-out drawers
Magnetic snap-in drawer gaskets
Completely enclosed, vented and removable case back
3 5/8” casters

MODEL FEATURES

Interior hanging thermometer
Front breathing
Meets ADA height requirements

Front breathers are a unique, field assembled, bottom mounted ventilation
system designed to allow cabinets to be flush against a wall or built into a
counter to conserve space.

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specifications

DIMENSIONAL DATA

Net Capacity (cu. ft.) 7.4 (210 cu l)
Width, Overall (in.) 27 11/16 (703 mm)
Depth, Overall (in.) (incl. handles) 30 9/16 (776 mm)
Depth, Body Only

(less drawers) (in.)
Height, Overall (in.)

(incl. 3 5/8” casters)
No. of Drawers (two tier) 2
No. of Drawers (three tier) 3

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/5
Capacity (BTU/Hr)* 1620

27 1/2 (699 mm)

31 61/64 (812 mm)

FRONT VIEW

Model Plan Views

27 11/16”
(703 mm)

27 1/2”

(699 mm)

Note: Shown with two tier drawers.

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1)
Fans 1
Total Amps (int’l) 6.3 (3.7)
10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Weight (lbs.) 180 (82 kg)
Height - Crated (in.) 43 1/4 (1099 mm)
Width - Crated (in.) 35 3/4 (908 mm)
Depth - Crated (in.) 37 1/4 (946 mm)

DRAWER PAN CONFIGURATIONS

Two Tier: (1) 12 x 20 x 6 pan per drawer
Three Tier: (1) 12 x 20 x 4 pan per drawer

* Rating @ +25°F evaporator, 90°F ambient

Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative
products, specifications subject to change without notice.

30 9/16”

(776 mm)

2 7/8”

(73 mm)

SIDE VIEW

REFRIGERATION SYSTEM

The self-contained refrigeration system is rear
mounted, concealed behind a removable lou­vered cover. Full-length front air grille allows for
even air circulation to condensing unit. A “per­formance rated”, air-cooled, hermetically sealed,
capillary type refrigeration system is installed in
model. Plasticized finned coil and air circulating
fans are contained within an easily accessible rear
mounted housing. Our unique airflow design al­lows the cabinet to be enclosed on both sides or
to be mounted flush against a wall. Our refrigera­tion system, fully charged with R-134a refrigerant,
is designed to maintain 38°-41°F while operating
with an unrestricted air supply in an ambient tem­perature of 100°F. All condensate water is directed
to a non-electric condensate vaporizer located in
the compressor compartment, no plumbing is re­quired. A strict quality assurance team inspects all
materials and components to certify that the model
conforms to the most exacting standards. Model
is performance tested for a minimum of 16 hours
prior to crating.

INSULATION

All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.

3/32”

(2 mm)

27 11/16”
(703 mm)

27 1/2”

(699 mm)

3/32”

(2 mm)

31 61/64”
(812 mm)

3 5/8”

(92 mm)

CABINET CONSTRUCTION

All materials are of top quality and are assembled
under rigid supervision conforming to strict quality
assurance requirements. Case is all welded metal
construction and is internally supported and braced
for rigid unit construction. Exterior cabinet back
and bottom are heavy-gauge galvanized steel.

Cabinet design eliminates overlapping panels
with raw edges. Interior corners are rounded with
a 1/4” radius for cleaning ease. All cabinet joints
and seams are vapor-tight sealed. An easily re­movable anti-sweat drawer heater, concealed by a
non-metallic, non-conductive, high impact thermal
breaker strip, eliminates condensation build-up on
case front.

DRAWER CONSTRUCTION

Drawer fronts and backs are constructed of heavy
gauge, polished stainless steel with heavy-duty,
safety grip, chrome plated handles. All drawer
fronts are insulated with non-CFC polyurethane
foam insulation. Full extension, lift-out type drawer
frames are heavy gauge, welded stainless steel
mounted on heavy-duty, easy glide, self closing
drawer slides. Self adjusting, full perimeter, mag­netic snap-in gaskets guarantee a positive seal.

®

MADE IN THE U.S.A.

© Copyright 2015. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.

DLUC27-SS-D (1/9/15)