Continental Refrigerator DLRA68-SS-F User Manual

DESIGNER LINE FISH FILE

Project Name:

Model: DLRA68-SS-F

68” Fish File Base

Specially designed for the storage of fresh sh packed in crushed ice

in drawer pans supplied with unit.

#304 Series stainless steel interior, stainless steel exterior.

Designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specied:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Performance-rated refrigeration system
Environmentally-safe R-134a refrigerant
Unique forced air design utilizes fans (approx. every 12”)

across the entire back of unit for even distribution of cold
Automatic, energy saving, non-electric

condensate evaporator

Non-corrosive, plasticized n evaporator coil

Easily serviceable, slide-out condensing unit

Options and Accessories

(upcharge and lead times may apply)

Drawer section above the condensing unit* Condensing unit left or right
Overshelves (single or double) Door/drawer locks
Automatic, electric condensate evaporator Casters
Digital thermometer Front breathing
Stainless steel back 5 1/2” Backsplash

*Drawer section above condensing unit holds (1) 12 x 20 x 6 pan (not supplied). This section is not set up for sh storage.

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation
Spring loaded, self closing door (over condensing unit)
Magnetic snap-in door/drawer gaskets
Easy glide drawers on heavy-duty drawer track
Fully welded, non-corrosive stainless steel pan per drawer

with built-in drain tubes and ice grates (drain into gutter)
Refrigerated door section above the condensing unit*
Adjustable 6” stainless steel legs

MODEL FEATURES

External dial thermometer

1” diameter oor cleanout drain

Expansion valve for quick recovery
Built-in, off-cycle defrost timer

NOTE: DLRA-F models come standard with a door over the condensing
unit. A drawer over the condensing unit is an option. This section is not

set up for sh storage.

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specications

(92 mm)

Model Plan Views

DIMENSIONAL DATA

Net Capacity (cu. ft.) 22 (623 cu l)
Width, Overall (in.) 68 (1727 mm)
Depth, Overall (in.)

(incl. handles & bumpers)

36 1/16 (916 mm)

Height, Overall (in.) (incl. 6” legs) 36 (914 mm)
No. of Drawers 4
No. of Half Doors 1
Interior Depth (in.) (above condenser) 30 (762 mm)
Interior Height (in.) (above condenser) 12 1/2 (318 mm)
Interior Width (in.) (above condenser) 17 (432 mm)

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/2
Capacity (BTU/Hr)* 4220

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1)
Fans 4
Total Amps (int’l) 13.0 (8.4)
10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Weight (lbs.) 495 (225 kg)
Height - Crated (in.) 43 3/4 (1111 mm)
Width - Crated (in.) 70 (1778 mm)
Depth - Crated (in.) 47 (1194 mm)

DRAWER PAN CONFIGURATIONS

(1) 20 5/32 x 17 3/4 x 6 pan per drawer
(can accommodate 12 x 20 perforated pans)

* Rating @ +25°F evaporator, 90°F ambient

Figures in parentheses reect metric equivalents rounded to the nearest

whole unit.

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative
products, specifications subject to change without notice.

(1727 mm)

25 1/2”

(648 mm)

FRONT VIEW

36 1/16”

(916 mm)

34”

(864 mm)

(318 mm)

30”

(762 mm)

6”

(152 mm)

DRAIN

SIDE VIEW

REFRIGERATION SYSTEM

Self-contained refrigeration system is rear mounted,
concealed behind a removable louvered cover. A
“performance rated”, air-cooled, hermetically sealed,
capillary type refrigeration system is installed in

model. Plasticized nned coil and air circulating

fans are contained within an easily accessible rear

mounted housing. Unique airow design allows the

cabinet to be enclosed on both sides or mounted

ush against a wall. Refrigeration system, fully

charged with R-134a refrigerant, is designed to main­tain 38°-41°F while operating with an unrestricted
air supply in an ambient temperature of 100°F. All
evaporater condensate water is directed to a non­electric condensate evaporator located in the com­pressor compartment, no plumbing is required. A
strict quality assurance team inspects all materials
and components to certify the model conforms to
the most exacting standards. Model is performance
tested for a minimum of 16 hours prior to crating.

INSULATION

All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.

68”

17”

(432 mm)

DRAIN

1”

(25 mm)

12 1/2”

36”

(914 mm)

3 5/8”

CABINET CONSTRUCTION

Materials are top quality, assembled under rigid
supervision conforming to strict quality assurance
requirements. Case is welded metal construction,
internally supported and braced for rigid unit
construction. Exterior, interior and worktop are
heavy gauge polished stainless steel. Design
eliminates overlapping panels with raw edges.
Interior corners are rounded with 1/4” radius.
Joints and seams are vapor-tight sealed. Easily
removable anti-sweat door heaters, concealed by
non-metallic, non-conductive, high impact thermal
breaker strips, eliminates condensation build-up on
case front.

DRAWER CONSTRUCTION

Drawers are constructed of heavy-gauge, polished
stainless steel. Drawer fronts are insulated with
non-CFC polyurethane foam insulation. Full exten­sion, lift-out drawer frames are heavy gauge, weld­ed stainless steel mounted on heavy-duty, easy
glide, self closing drawer slides. Self adjusting, full
perimeter, magnetic snap-in gaskets guarantee a
positive seal. Condensation from pans and water

from ice is drained by drawer gutters to the oor
of the cabinet where a 1” male pipe connection

must drain to a oor sink nearby.

®

MADE IN THE U.S.A.

© Copyright 2016. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.

DLRA68-SS-F (8/17/16)