Continental Refrigerator DLRA68-SS-BS User Manual

DESIGNER LINE BASE MODEL

Project Name:

Model: DLRA68-SS-BS

68” Worktop Refrigerator with
6” Backsplash and Solid Doors

Stainless steel exterior front, sides and interior.

Designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Environmentally-safe R-134a refrigerant
Designed to maintain NSF-7

temperatures in 100°F ambient
Automatic, energy-saving, non-electric

condensate evaporator
Non-corrosive, plasticized fin evaporator coil
Unique forced air design utilizes fans (approx. every 12”)

across the entire back of unit for even distribution of cold

Options and Accessories

(upcharge and lead times may apply)

Drawers in lieu of doors Stainless steel back
Drawer section above the condensing unit* Remote models
Automatic, electric condensate evaporator Digital thermometer
Overshelves (single or double) Flat top
Stainless steel pan slides Front breathing
Additional epoxy-coated steel shelves Casters
Condensing unit left or right Door/drawer locks

*Models come standard with a door over the condensing unit. A drawer over the condensing unit is an option.
Drawer section above condensing unit holds (1) 12 x 20 x 6 pan.

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation
Spring loaded, self closing doors

with magnetic snap-in gaskets
Heavy-duty, epoxy-coated steel shelves
Completely enclosed, vented and removable rear grill
Refrigerated door section above the condensing unit
Adjustable 6” stainless steel legs
6” backsplash

MODEL FEATURES

Easily serviceable, slide-out condensing unit
Expansion valve for quick recovery
Built-in, off-cycle defrost timer
External dial thermometer
Field rehingeable doors

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specifications

DIMENSIONAL DATA

Net Capacity (cu. ft.) 22 (623 cu l)
Width, Overall (in.) 68 (1727 mm)
Depth, Overall (incl. handles) (in.) 36 1/16 (916 mm)
Height, Overall (incl. 6” legs) (in.) 41 1/2 (1054 mm)
Shelf Area 9.8
No. of Shelves 4
No. of Full Doors 2
No. of Half Doors 1
Interior Depth (in.) 30 (762 mm)
Interior Height (in.) 26 (660 mm)
Interior Height

(above condensing unit) (in.)
Interior Width 64 (1626 mm)

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/2
Capacity (BTU/Hr)* 4220

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1)
Fans 4
Total Amps (int’l) 13.0 (8.4)
10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Weight (lbs.) 490 (222 kg)
Height - Crated (in.) 43 3/4 (1111 mm)
Width - Crated (in.) 70 (1778 mm)
Depth - Crated (in.) 47 (1194 mm)

* Rating @ +25°F evaporator, 90°F ambient

Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.

12 1/2 (318 mm)

Model Plan Views

FRONT VIEW

SIDE VIEW

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative
products, specifications subject to change without notice.

®

MADE IN THE U.S.A.

© Copyright 2013. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.

REFRIGERATION SYSTEM

The self-contained refrigeration system is rear
mounted, concealed behind a removable lou­vered cover. Full-length front air grille allows for
even air circulation to condensing unit. A “per­formance rated”, air-cooled, hermetically sealed,
capillary type refrigeration system is installed in
model. Plasticized finned coil and air circulating
fans are contained within an easily accessible rear
mounted housing. Our unique airflow design al­lows the cabinet to be enclosed on both sides or
to be mounted flush against a wall. Our refrigera­tion system, fully charged with R-134a refrigerant,
is designed to maintain 38°-41°F while operating
with an unrestricted air supply in an ambient tem­perature of 100°F. All condensate water is directed
to a non-electric condensate vaporizer located in
the compressor compartment, no plumbing is re­quired. A strict quality assurance team inspects all
materials and components to certify that the model
conforms to the most exacting standards. Model
is performance tested for a minimum of 16 hours
prior to crating.

INSULATION

All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.

DOOR CONSTRUCTION

Door shells are constructed of heavy-gauge stain­less steel and are internally braced and urethane
foam-insulated for rigidity. Door corners are of
welded construction and polished. Replaceable
snap-in door gaskets are self adjusting, heavy­duty, magnetic type. Door handles and hinges
are chrome-plated and non-corrosive. Hinges are
spring loaded, heavy duty and self-closing.

CABINET CONSTRUCTION

All materials are of top quality and are assembled
under rigid supervision conforming to strict quality
assurance requirements. Case is all welded metal
construction and is internally supported and braced
for rigid unit construction. Exterior, interior and
worktop are heavy-gauge polished stainless steel
for durability. Cabinet design eliminates overlap­ping panels with raw edges. Interior corners are
rounded with a 1/4” radius for cleaning ease. All
cabinet joints and seams are vapor-tight sealed.
An easily removable anti-sweat drawer heater,
concealed by a non-metallic, non-conductive, high
impact thermal breaker strip, eliminates condensa­tion build-up on case front.

DLRA68-SS-BS (9/19/13)