Continental Refrigerator DLRA68-SS User Manual
DESIGNER LINE BASE MODEL
Project Name:
Model: DLRA68-SS
68” Worktop Refrigerator
with Solid Doors
Stainless steel exterior front, sides and interior.
Designed to maintain NSF-7 temperatures in 100°F ambient.
Model Specified:
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Performance-rated refrigeration system
Environmentally-safe R-134a refrigerant
Unique forced air design utilizes fans (approx. every 12”)
across the entire back of unit for even distribution of cold
Automatic, energy saving, non-electric
condensate evaporator
Non-corrosive, plasticized fin evaporator coil
Easily serviceable, slide-out condensing unit
Options and Accessories
(upcharge and lead times may apply)
Drawers in lieu of doors Stainless steel back and interior
Drawer section above the condensing unit* Condensing unit left or right
Overshelves (single or double) Stainless steel pan slides
Additional epoxy-coated steel shelves Remote models
Stainless steel shelves Door/drawer locks
Automatic, electric condensate evaporator Casters
Digital thermometer Front breathing
Backsplash - BS models
*Drawer section above condensing unit holds (1) 12 x 20 x 6 pan
CABINET ARCHITECTURE
2” non-CFC polyurethane foam insulation
Spring loaded, self closing doors
Magnetic snap-in door gaskets
Heavy-duty, epoxy-coated steel shelves
Adjustable 6” stainless steel legs
Completely enclosed, vented and removable rear grill
Refrigerated door section above the condensing unit
MODEL FEATURES
External dial thermometer
Field rehingeable doors
NOTE: DLRA models come standard with a door over the condensing unit.
A drawer over the condensing unit is an option.
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
APPROVAL:
Model Specifications
Model Plan Views
DIMENSIONAL DATA
Net Capacity (cu. ft.) 22 (623 cu l)
Width, Overall (in.) 68 (1727 mm)
Depth, Overall (in.)
(incl. handles & bumpers)
36 1/16 (916 mm)
Height, Overall (in.) (incl. 6” legs) 36 (914 mm)
Shelf Area (sq. ft.) 9.8 (.9 sq m)
No. of Shelves 4
No. of Full Doors 2
No. of Half Doors 1
Interior Depth (in.) 30 (762 mm)
Interior Height (in.) 26 (660 mm)
Interior Height (in.) (above condenser) 12 1/2 (318 mm)
Interior Width (in.) 64 (1626 mm)
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1/2
Capacity (BTU/Hr)* 4220
ELECTRICAL DATA
Voltage (int’l) 115/60/1 (220/50/1)
Fans 4
Total Amps (int’l) 13.0 (8.4)
10 ft. Cord/Plug [attached] (int’l) Yes (No)
SHIPPING DATA
Weight (lbs.) 485 (220 kg)
Height - Crated (in.) 43 3/4 (1111 mm)
Width - Crated (in.) 70 (1778 mm)
Depth - Crated (in.) 47 (1194 mm)
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
(660 mm)
FRONT VIEW
SIDE VIEW
26”
6”
(152 mm)
47”
(1194 mm)
26”
(661 mm)
68”
(1727 mm)
36 1/16”
(916 mm)
34”
(864 mm)
30”
(762 mm)
13 1/2”
(343 mm)
(432 mm)
1”
(25 mm)
36”
(914 mm)
17”
Equipped with one NEMA-5-15P Plug
(varies by country)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2014. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
REFRIGERATION SYSTEM
The self-contained refrigeration system is rear
mounted, concealed behind a removable louvered cover. Full-length front air grille allows for
even air circulation to condensing unit. A “performance rated”, air-cooled, hermetically sealed,
capillary type refrigeration system is installed in
model. Plasticized finned coil and air circulating
fans are contained within an easily accessible rear
mounted housing. Our unique airflow design allows the cabinet to be enclosed on both sides or
to be mounted flush against a wall. Our refrigeration system, fully charged with R-134a refrigerant,
is designed to maintain 38°-41°F while operating
with an unrestricted air supply in an ambient temperature of 100°F. All condensate water is directed
to a non-electric condensate vaporizer located in
the compressor compartment, no plumbing is required. A strict quality assurance team inspects all
materials and components to certify that the model
conforms to the most exacting standards. Model
is performance tested for a minimum of 16 hours
prior to crating.
INSULATION
All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.
DOOR CONSTRUCTION
Door shells are constructed of heavy-gauge stainless steel and are internally braced and urethane
foam-insulated for rigidity. Door corners are of
welded construction and polished. Replaceable
snap-in door gaskets are self adjusting, heavyduty, magnetic type. Door handles and hinges
are chrome-plated and non-corrosive. Hinges are
spring loaded, heavy duty and self-closing.
CABINET CONSTRUCTION
All materials are of top quality and are assembled
under rigid supervision conforming to strict quality
assurance requirements. Case is all welded metal
construction and is internally supported and braced
for rigid unit construction. Exterior, interior and
worktop are heavy-gauge polished stainless steel
for durability. Cabinet design eliminates overlapping panels with raw edges. Interior corners are
rounded with a 1/4” radius for cleaning ease. All
cabinet joints and seams are vapor-tight sealed.
An easily removable anti-sweat drawer heater,
concealed by a non-metallic, non-conductive, high
impact thermal breaker strip, eliminates condensation build-up on case front.
DLRA68-SS (4/24/14)
Loading...