Continental Refrigerator DLRA60-SS-BS-D User Manual
DESIGNER LINE BASE MODEL
Project Name:
Model: DLRA60-SS-BS-D
60” Base Model Worktop Refrigerator
with 6” Backsplash, Drawers
and Solid Doors
Stainless steel exterior front, sides and interior.
Designed to maintain NSF-7 temperatures in 100°F ambient.
Model Specified:
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Environmentally-safe R-134a refrigerant
Designed to maintain NSF-7
temperatures in 100°F ambient
Automatic, energy-saving, non-electric
condensate evaporator
Non-corrosive, plasticized fin evaporator coil
Unique forced air design utilizes fans (approx. every 12”)
across the entire back of unit for even distribution of cold
Options and Accessories
(upcharge and lead times may apply)
Door in lieu of drawers Remote models
Drawer section above the condensing unit* Digital thermometer
Automatic, electric condensate evaporator Flat top
Overshelves (single or double) Front breathing
Additional epoxy-coated steel shelves Casters
Condensing unit left or right Door/drawer locks
Stainless steel back
*Drawer section above condensing unit holds (1) 12 x 20 x 6 pan
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
CABINET ARCHITECTURE
2” non-CFC polyurethane foam insulation
Spring loaded, self closing doors
(over condensing unit and smaller section)
Magnetic snap-in door/drawer gaskets
Stainless steel roll-out drawers
Heavy-duty, epoxy-coated steel shelf (smaller section)
Completely enclosed, vented and removable rear grill
Refrigerated door section above the condensing unit
Adjustable 6” stainless steel legs
6” backsplash
MODEL FEATURES
Easily serviceable, slide-out condensing unit
Expansion valve for quick recovery
Built-in, off-cycle defrost timer
External dial thermometer
Field rehingeable doors
NOTE: DLRA60-D drawer models come standard with a door over the
condensing unit, a solid door on the left section and two tier drawers
in the center section. A drawer over the condensing unit is an option.
The option of having the door/drawers located in the opposite sections
MUST be indicated at the time of ordering.
APPROVAL:
Model Specifications
Model Plan Views
DIMENSIONAL DATA
Net Capacity (cu. ft.) 19 (538 cu l)
Width, Overall (in.) 60 (1524 mm)
Depth, Overall (in.)
(incl. handles & bumpers)
36 1/16 (916 mm)
Height, Overall (in.) (incl. 6” legs) 41 1/2 (1054 mm)
Shelf Area 5.6 (.5 sq m)
No. of Shelves 1
No. of Full Doors / Drawers 1 / 2
No. of Half Doors 1
Interior Depth (in.) 30 (762 mm)
Interior Height (in.) (smaller section) 26 (660 mm)
Interior Height (in.) (above condenser) 12 1/2 (318 mm)
Interior Width (in.) (smaller section) 17 (1422 mm)
Interior Width (in.) (above condenser) 17 (1422 mm)
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1/2
Capacity (BTU/Hr)* 3100
ELECTRICAL DATA
Voltage (int’l) 115/60/1 (220/50/1)
Fans 3
Total Amps (int’l) 12.3 (8.4)
10 ft. Cord/Plug [attached] (int’l) Yes (No)
SHIPPING DATA
Weight (lbs.) 425 (193 kg)
Height - Crated (in.) 43 3/4 (1111 mm)
Width - Crated (in.) 62 (1575 mm)
Depth - Crated (in.) 47 (1194 mm)
DRAWER PAN CONFIGURATIONS
Two Tier: (2) 12 x 20 x 6 pans per drawer
Three Tier: (1) 12 x 20 x 4 pan per drawer (top)
and (2) 12 x 20 x 4 pans per drawer (center & bottom)
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
Equipped with one NEMA-5-15P Plug
(varies by country)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2014. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
(1524 mm)
17”
(432 mm)
26”
(660 mm)
FRONT VIEW
36 1/16”
(916 mm)
(864 mm)
26”
30”
(762 mm)
6”
(152 mm)
SIDE VIEW
REFRIGERATION SYSTEM
The self-contained refrigeration system is rear
mounted, concealed behind a removable louvered cover. Full-length front air grille allows for
even air circulation to condensing unit. A “performance rated”, air-cooled, hermetically sealed,
capillary type refrigeration system is installed in
model. Plasticized finned coil and air circulating
fans are contained within an easily accessible rear
mounted housing. Our unique airflow design allows the cabinet to be enclosed on both sides or
to be mounted flush against a wall. Our refrigeration system, fully charged with R-134a refrigerant,
is designed to maintain 38°-41°F while operating
with an unrestricted air supply in an ambient temperature of 100°F. All condensate water is directed
to a non-electric condensate vaporizer located in
the compressor compartment, no plumbing is required. A strict quality assurance team inspects all
materials and components to certify that the model
conforms to the most exacting standards. Model
is performance tested for a minimum of 16 hours
prior to crating.
DRAWER CONSTRUCTION
Drawer fronts and backs are constructed of heavy
gauge, polished stainless steel with heavy-duty,
safety grip, chrome plated handles. All drawer
fronts are insulated with non-CFC polyurethane
foam insulation. Full extension, lift-out type drawer
frames are heavy gauge, welded stainless steel
mounted on heavy-duty, easy glide, self closing
drawer slides. Self adjusting, full perimeter, magnetic snap-in gaskets guarantee a positive seal.
(661 mm)
(762 mm)
60”
17”
(432 mm)
34”
12 1/2”
(318 mm)
41 1/2”
(1054 mm)
30”
DOOR CONSTRUCTION
Door shells are constructed of heavy-gauge stainless steel and are internally braced and urethane
foam-insulated for rigidity. Door corners are of
welded construction and polished. Replaceable
snap-in door gaskets are self adjusting, heavyduty, magnetic type. Door handles and hinges
are chrome-plated and non-corrosive. Hinges are
spring loaded, heavy duty and self-closing.
INSULATION
All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.
CABINET CONSTRUCTION
All materials are of top quality and are assembled
under rigid supervision conforming to strict quality
assurance requirements. Case is all welded metal
construction and is internally supported and braced
for rigid unit construction. Exterior, interior and
worktop are heavy-gauge polished stainless steel
for durability. Cabinet design eliminates overlapping panels with raw edges. Interior corners are
rounded with a 1/4” radius for cleaning ease. All
cabinet joints and seams are vapor-tight sealed.
An easily removable anti-sweat drawer heater,
concealed by a non-metallic, non-conductive, high
impact thermal breaker strip, eliminates condensation build-up on case front.
DLRA60-SS-BS-D (6/16/14)
Loading...