Continental Refrigerator DLF36-SS-U User Manual

DESIGNER LINE UNDERCOUNTER FREEZER (0°F)

Project Name:

Model: DLF36-SS-U

36” Undercounter Freezer
with Solid Doors

Stainless steel exterior and interior with stainless steel top.

Designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specied:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Performance-rated refrigeration system
Environmentally-safe R-404A refrigerant
Automatic, energy-saving, non-electric

condensate evaporator

Non-corrosive, plasticized n evaporator coil

Easily serviceable back mounted compressor

Options and Accessories

(upcharge and lead times may apply)

Stainless steel back Expansion valve system
Stainless steel shelves Door locks

Additonal epoxy-coated steel shelves

Automatic electric condensate evaporator

Consult factory for other model congurations, options and accessories.

Special electrical requirements
(consult factory)

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation
Spring loaded, self closing doors
Magnetic snap-in door gaskets
Heavy-duty, epoxy-coated steel shelves
Completely enclosed, vented and removable case back
1 3/8” diameter plate casters (factory installed)

MODEL FEATURES

Electronic controller w/ digital display
2” high, bottom mounted front breather air divider
Automatic electric defrost
Field rehingeable doors

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specications

DIMENSIONAL DATA

Net Capacity (cu. ft.) 10.3 (292 cu l)
Width, Overall (in.) 36 (914 mm)
Depth, Overall (in.)

(incl. handles & bumpers)

Height, Overall (in.)

(incl. 1 3/8” plate casters)

Shelf Area (sq. ft.) 4.6 (.4 sq m)
No. of Shelves 2
No. of Doors 2
Interior Depth (in.) See Drawing
Interior Height (in.) 26 1/4 (667 mm)
Interior Width (in.) 32 (813 mm)

31 9/16 (802 mm)

31 13/16 (808 mm)

Model Plan Views

36”

(914 mm)

UC32 - 32” Undercounter
Refrigerator with Solid Door

23 5/8”

13 9/16”

(344 mm)

DOOR

OPENING

(600 mm)

DOOR

OPENING

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/3
Capacity (BTU/Hr)* 1340

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1)
Fans 1
Total Amps (int’l) 5.8 (2.8)
Defrost Amps (int’l) 3.9 (2.0)
10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Weight (lbs.) 239 (108 kg)
Height - Crated (in.) 43 1/4 (1099 mm)
Width - Crated (in.) 43 (1092 mm)
Depth - Crated (in.) 37 1/4 (946 mm)

* Rating @ -15°F evaporator, 90°F ambient

Figures in parentheses reect metric equivalents rounded to the nearest

whole unit.

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative
products, specifications subject to change without notice.

FRONT VIEW

31 9/16”

1 1/2”

(38 mm)

23 3/4”

(603 mm)

DOOR

OPENING

SIDE VIEW

NOTE: For proper operation, the area under and in front of the cabinet must not be obstructed in any way.

REFRIGERATION SYSTEM

The self-contained refrigeration system is rear
mounted, concealed behind a removable back cover.

Bottom mounted, low prole air divider allows for

even air circulation to condensing unit. A “perfor­mance-rated”, air-cooled, hermetically sealed, capil­lary type refrigeration system is installed in model.

Plasticized nned coil and air circulating fans are

contained within an easily accessible rear mounted

housing. Unique airow design allows the cabinet to
be enclosed on both sides or mounted ush against

a wall. Refrigeration system, fully charged with R­404A refrigerant, is designed to maintain 0°F while
operating with an unrestricted air supply in an ambi­ent temperature of 100°F. All condensate water is
directed to a non-electric condensate vaporizer lo­cated in the compressor compartment, no plumbing
is required. A strict quality assurance team inspects
all materials and components to certify the model
conforms to the most exacting standards. Model is
performance tested for a minimum of 16 hours prior
to crating.

INSULATION

All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.

(802 mm)

(762 mm)

19 3/8”

(492 mm)

14 7/8”

(378 mm)

10 1/4”

(260 mm)

30”

29 3/4”

(756 mm)

2 1/16”

(52 mm)

CABINET CONSTRUCTION

Materials are top quality, assembled under rigid
supervision conforming to strict quality assurance
requirements. Case is welded metal construction,
internally supported and braced for rigid unit con­struction. Exterior cabinet back and bottom are
heavy-gauge galvanized steel.

Design eliminates overlapping panels with raw
edges. Interior corners are rounded with 1/4” radi­us. Joints and seams are vapor-tight sealed. Easily
removable anti-sweat door heaters, concealed by
non-metallic, non-conductive, high impact ther­mal breaker strips, eliminates condensation build­up on case front.

DOOR CONSTRUCTION

Door shells are constructed of heavy-gauge stain­less steel and are internally braced and urethane­foam-insulated for rigidity. Door corners are of
welded construction and polished. Replaceable
snap-in door gaskets are self adjusting, heavy­duty, magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Hinges are
spring loaded, heavy duty and self-closing.

31 13/16”

(808 mm)

®

MADE IN THE U.S.A.

© Copyright 2017. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.

DLF36-SS-U (1/18/17)