Continental Refrigerator DL60-12 User Manual

DESIGNER LINE SANDWICH UNIT

Project Name:

Model: DL60-12

60” Standard Top Sandwich Unit
Refrigerator with Solid Doors - 12 Pans

Stainless steel exterior and interior.

Certified under NSF-7 to maintain temperatures in 86°F ambient
and designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Performance-rated refrigeration system
Environmentally-safe R-134a refrigerant
Unique air flow distribution allows

pan product to maintain 33° - 41°F
Automatic, energy saving, non-electric

condensate evaporator
Non-corrosive, plasticized fin evaporator coil
Easily serviceable, back mounted compressor

Options and Accessories

(upcharge and lead times may apply)

Stainless steel finished back in lieu of aluminum Rear-mounted cutting board
Overshelves (single or double) Flat insulated night cover
Stainless steel shelves Remote models
Drawers in lieu of doors Door locks
Additional epoxy-coated steel shelves Crumb catcher
Automatic, electric condensate evaporator Top extensions
Modified pan openings Digital thermometer
Front breathing Casters
Expansion valve system

Consult factory for other model configurations, options and accessories.

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation
Spring loaded, self closing doors
Magnetic snap-in door gaskets
Heavy-duty, epoxy-coated steel shelves
12” deep, full length nylon cutting board
Insulated lid
Adjustable 6” stainless steel legs
Completely enclosed, vented and removable case back

MODEL FEATURES

(12) 1/6 size non-recessed pans, 4” deep
Interior hanging thermometer
Field rehingeable doors

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specifications

Model Plan Views

DIMENSIONAL DATA

Net Capacity (cu. ft.) 17.0 (481 cu l)
1/6 Size Pans (4” deep) 12
Width, Overall (in.) 60 (1524 mm)
Depth, Overall (in.)

(incl. handles & bumpers)

31 7/16 (799 mm)

Depth, Body Only (in.) (less doors) 27 1/2 (699 mm)
Depth, Cutting Board (in.) 12 (305 mm)
Height, Overall (in.) (incl. 6” legs) 43 1/4 (1099 mm)
Shelf Area (sq. ft.) 8.1 (.8 sq m)
No. of Shelves 2
No. of Doors 2
Interior Depth (in.) 19 3/8 (492 mm)
Interior Height (in.) 26 1/4 (667 mm)
Interior Width (in.) 56 (1422 mm)

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/4
Capacity (BTU/Hr)* 1940

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1)
Fans 3
Total Amps (int’l) 6.6 (4.4)
10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Weight (lbs.) 311 (141 kg)
Height - Crated (in.) 43 1/4 (1099 mm)
Width - Crated (in.) 68 1/4 (1734 mm)
Depth - Crated (in.) 46 (1168 mm)

* Rating @ +25°F evaporator, 90°F ambient

Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.

FRONT VIEW

SIDE VIEW

46 9/32”

(1176 mm)

(762 mm)

30”

(581 mm)

DOOR OPENING

11”

(279 mm)

23 3/4”

(603 mm)

DOOR

OPENING

22 7/8”

(799 mm)

19 3/8”

(492 mm)

14 7/8”

(378 mm)

10 1/4”

(260 mm)

60”

(1524 mm)

31 7/16”

27 1/2”

(699 mm)

(25 mm)

30 1/4”

(768 mm)

6”

(152 mm)

12”

(305 mm)

1”

(1099 mm)

12”

(305 mm)

43 1/4”

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative
products, specifications subject to change without notice.

®

MADE IN THE U.S.A.

© Copyright 2015. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.

PAN TOP CONFIGURATION

REFRIGERATION SYSTEM

Self-contained refrigeration system is rear mounted,
concealed behind a removable louvered cover. A
“performancerated”, air-cooled,hermetically sealed,
capillary type refrigeration system is installed in
model. Plasticized finned coil and air circulat­ing fans are contained within an easily accessible
rear mounted housing. Unique airflow design al­lows the cabinet to be enclosed on both sides or
mounted flush against a wall. Refrigeration system,
fully charged with R-134a refrigerant, is designed
to maintain 38°-41°F while operating with an un­restricted air supply in an ambient temperature of
100°F. All condensate water is directed to a non­electric condensate vaporizer located in the com­pressor compartment, no plumbing is required. A
strict quality assurance team inspects all materials
and components to certify the model conforms to
the most exacting standards. Model is performance
tested for a minimum of 16 hours prior to crating.

INSULATION

All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.

(1524 mm)

60”

CABINET CONSTRUCTION

Materials are top quality, assembled under rigid
supervision conforming to strict quality assurance
requirements. Case is welded metal construction,
internally supported and braced for rigid unit
construction. Exterior, interior and worktop are
heavy gauge polished stainless steel. Design
eliminates overlapping panels with raw edges.
Interior corners are rounded with 1/4” radius.
Joints and seams are vapor-tight sealed. Easily
removable anti-sweat door heaters, concealed by
non-metallic, non-conductive, high impact ther­mal breaker strips, eliminates condensation build­up on case front.

DOOR CONSTRUCTION

Door shells are constructed of heavy-gauge stain­less steel and are internally braced and urethane­foam-insulated for rigidity. Door corners are of
welded construction and polished. Replaceable
snap-in door gaskets are self adjusting, heavy­duty, magnetic type. Door handles and hinges
are chrome-plated and non-corrosive. Hinges are
spring loaded, heavy duty and self-closing.

DL60-12 (6/4/15)