Continental Refrigerator DL48-8-FB-D User Manual

DESIGNER LINE SANDWICH UNIT

Project Name:

Model: DL48-8-FB-D

48” Standard Top Sandwich Unit
Refrigerator with Drawers - 8 Pans
Front Breathing

Stainless steel exterior and interior.

Certified under NSF-7 to maintain temperatures in 86°F ambient
and designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Performance-rated refrigeration system
Environmentally-safe R-134a refrigerant
Unique air flow distribution allows

pan product to maintain 33° - 41°F
Automatic, energy saving, non-electric

condensate evaporator
Non-corrosive, plasticized fin evaporator coil
Easily serviceable, back mounted compressor

Options and Accessories

(upcharge and lead times may apply)

Stainless steel finished back in lieu of aluminum Flat insulated night cover
Overshelves (single or double) Remote models
Solid doors in lieu of drawers Drawer locks
Automatic, electric condensate evaporator Crumb catcher
Modified pan openings Top extensions
Expansion valve system Digital thermometer
Rear-mounted cutting board Three tier drawers

Consult factory for other model configurations, options and accessories.

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation
Magnetic snap-in drawer gaskets
12” deep, full length nylon cutting board
Stainless steel roll-out drawers
Insulated lid
3 5/8” casters
Completely enclosed, vented and removable case back

MODEL FEATURES

(8) 1/6 size non-recessed pans, 4” deep
Interior hanging thermometer

Front breathers are a unique, field assembled, bottom mounted ventilation
system designed to allow cabinets to be flush against a wall or built into a
counter to conserve space.

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specifications

Model Plan Views

DIMENSIONAL DATA

Net Capacity (cu. ft.) 13.4 (379 cu l)
1/6 Size Pans (4” deep) 8
Width, Overall (in.) 48 (1219 mm)
Depth, Overall (in.)

(incl. handles & bumpers)
Depth, Body Only

(less drawers) (in.)

31 7/16 (799 mm)

27 1/2 (699 mm)

Depth, Cutting Board (in.) 12 (305 mm)
Height, Overall (in.)

(incl. 5” casters)

40 7/8 (1038 mm)

No. of Drawers (two tier) 4
No. of Drawers (three tier) 6

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/5
Capacity (BTU/Hr)* 1620

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1)
Fans 3
Total Amps (int’l) 7.3 (3.6)
10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Weight (lbs.) 267 (121 kg)
Height - Crated (in.) 43 1/4 (1099 mm)
Width - Crated (in.) 64 (1626 mm)
Depth - Crated (in.) 46 (1168 mm)

DRAWER PAN CONFIGURATIONS

Two Tier: (1) 12 x 18 x 6 pan per drawer

or (1) 1/2 size x 6 & (1) 1/3 x 6 pans per drawer
Three Tier: (1) 12 x 18 x 3 1/2 pan per drawer

or (1) 1/2 size x 4 & (1) 1/3 x 4 pans per drawer

* Rating @ +25°F evaporator, 90°F ambient

Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative
products, specifications subject to change without notice.

®

MADE IN THE U.S.A.

© Copyright 2015. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.

48”

(1219 mm)

FRONT VIEW

31 7/16”

(799 mm)

11”

(279 mm)

44 29/32”

(1141 mm)

27 1/2”

SIDE VIEW

30”

(762 mm)

PAN TOP CONFIGURATION

Note: Shown with two tier drawers, see Standard Design Features for drawer pan configurations.

REFRIGERATION SYSTEM

Self-contained refrigeration system is rear mounted,
concealed behind a removable louvered cover.
Full-length front air grille allows for even air circu­lation to condensing unit. A “performance rated”,
air-cooled, hermetically sealed, capillary type re­frigeration system is installed in model. Plasticized
finned coil and air circulating fans are contained
within an easily accessible rear mounted housing.
Unique airflow design allows the cabinet to be
enclosed on both sides or mounted flush against
a wall. Refrigeration system, fully charged with R­134a refrigerant, is designed to maintain 38°-41°F
while operating with an unrestricted air supply in
an ambient temperature of 100°F. All condensate
water is directed to a non-electric condensate va­porizer located in the compressor compartment,
no plumbing is required. A strict quality assurance
team inspects all materials and components to cer­tify the model conforms to the most exacting stan­dards. Model is performance tested for a minimum
of 16 hours prior to crating.

INSULATION

All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.

(699 mm)

(502 mm)

48”

(1219 mm)

CABINET CONSTRUCTION

Materials are top quality, assembled under rigid
supervision conforming to strict quality assurance
requirements. Case is welded metal construction,
internally supported and braced for rigid unit
construction. Exterior, interior and worktop are
heavy gauge polished stainless steel. Design
eliminates overlapping panels with raw edges.
Interior corners are rounded with 1/4” radius. Joints
and seams are vapor-tight sealed. Easily removable
anti-sweat door heaters, concealed by non-metallic,
non-conductive, high impact thermal breaker strips,
eliminates condensation build-up on case front.

DRAWER CONSTRUCTION

Fronts/backs are constructed of heavy-gauge, pol­ished stainless steel with heavy-duty, safety grip,
chrome plated handles. Drawer fronts are insulated
with non-CFC polyurethane foam insulation. Full
extension, lift-out frames are heavy gauge, welded
stainless steel mounted on heavy-duty, easy glide,
self closing slides. Self adjusting, full perimeter,
magnetic snap-in gaskets guarantee a positive seal.

19 3/4”

1”

(25 mm)

30 1/4”

(768 mm)

3 5/8” (92 mm)

12”

(305 mm)

40 7/8”

(1038 mm)

DL48-8-FB-D (6/4/15)