Continental Refrigerator DL48-12M-D User Manual

DESIGNER LINE SANDWICH UNIT

Project Name:

Model: DL48-12M-D

48” Mighty Top Sandwich Unit
Refrigerator with Drawers - 12 Pans

Stainless steel exterior and interior.

Certified under NSF-7 to maintain temperatures in 86°F ambient
and designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Performance-rated refrigeration system
Environmentally-safe R-134a refrigerant
Unique air flow distribution allows

pan product to maintain 33° - 41°F
Automatic, energy saving, non-electric

condensate evaporator
Non-corrosive, plasticized fin evaporator coil
Easily serviceable, back mounted compressor

Options and Accessories

(upcharge and lead times may apply)

Stainless steel finished back in lieu of aluminum Flat insulated night cover
Overshelves (single or double) Remote models
Solid doors in lieu of drawers Drawer locks
Automatic, electric condensate evaporator Crumb catcher
Modified pan openings Top extensions
Front breathing Digital thermometer
Expansion valve system Casters
Rear-mounted cutting board Three tier drawers

Consult factory for other model configurations, options and accessories.

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation
Magnetic snap-in drawer gaskets
10” deep, full length nylon cutting board
Stainless steel roll-out drawers
Insulated lid
Adjustable 6” stainless steel legs
Completely enclosed, vented and removable case back

MODEL FEATURES

(12) 1/6 size non-recessed pans, 4” deep
Interior hanging thermometer

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specifications

Model Plan Views

DIMENSIONAL DATA

Net Capacity (cu. ft.) 13.4 (379 cu l)
1/6 Size Pans (4” deep) 12
Width, Overall (in.) 48 (1219 mm)
Depth, Overall (in.)

(incl. handles & bumpers)

35 (889 mm)

Depth, Body Only (in.) (less drawers) 27 1/2 (699 mm)
Depth, Cutting Board (in.) 10 (254 mm)
Height, Overall (in.) (incl. 6” legs) 43 1/4 (1099 mm)
No. of Drawers (two tier) 4
No. of Drawers (three tier) 6

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/5
Capacity (BTU/Hr)* 1620

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1)
Fans 3
Total Amps (int’l) 7.3 (3.6)
10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Weight (lbs.) 282 (128 kg)
Height - Crated (in.) 43 1/4 (1099 mm)
Width - Crated (in.) 64 (1626 mm)
Depth - Crated (in.) 46 (1168 mm)

DRAWER PAN CONFIGURATIONS

Two Tier: (1) 12 x 18 x 6 pan per drawer

or (1) 1/2 size x 6 & (1) 1/3 x 6 pans per drawer
Three Tier: (1) 12 x 18 x 3 1/2 pan per drawer

or (1) 1/2 size x 4 & (1) 1/3 x 4 pans per drawer

* Rating @ +25°F evaporator, 90°F ambient

Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative
products, specifications subject to change without notice.

®

MADE IN THE U.S.A.

© Copyright 2015. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.

48”

(1219 mm)

FRONT VIEW

35”

(889 mm)

1”

(25 mm)

16”

(406 mm)

52 1/4”

(1327 mm)

27 1/2”

SIDE VIEW

34”

(864 mm)

PAN TOP CONFIGURATION

Note: Shown with two tier drawers, see Standard Design Features for drawer pan configurations.

REFRIGERATION SYSTEM

Self-contained refrigeration system is rear mounted,
concealed behind a removable louvered cover. A
“performancerated”, air-cooled,hermetically sealed,
capillary type refrigeration system is installed in
model. Plasticized finned coil and air circulating fans
are contained within an easily accessible rear mounted
housing. Unique airflow design allows the cabinet to
be enclosed on both sides or mounted flush against a
wall. Refrigeration system, fully charged with R-134a
refrigerant, is designed to maintain 38°-41°F while op­erating with an unrestricted air supply in an ambient
temperature of 100°F. All condensate water is directed
to a non-electric condensate vaporizer located in the
compressor compartment, no plumbing is required.
A strict quality assurance team inspects all materi­als and components to certify the model conforms to
the most exacting standards. Model is performance
tested for a minimum of 16 hours prior to crating.

INSULATION

All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.

(699 mm)

48”

(1219 mm)

CABINET CONSTRUCTION

Materials are top quality, assembled under rigid
supervision conforming to strict quality assurance
requirements. Case is welded metal construction,
internally supported and braced for rigid unit
construction. Exterior, interior and worktop are
heavy gauge polished stainless steel. Design
eliminates overlapping panels with raw edges.
Interior corners are rounded with 1/4” radius.
Joints and seams are vapor-tight sealed. Easily
removable anti-sweat door heaters, concealed by
non-metallic, non-conductive, high impact thermal
breaker strips, eliminates condensation build-up on
case front.

DRAWER CONSTRUCTION

Fronts/backs are constructed of heavy-gauge, pol­ished stainless steel with heavy-duty, safety grip,
chrome plated handles. Drawer fronts are insulated
with non-CFC polyurethane foam insulation. Full
extension, lift-out frames are heavy gauge, welded
stainless steel mounted on heavy-duty, easy glide,
self closing slides. Self adjusting, full perimeter,
magnetic snap-in gaskets guarantee a positive seal.

19 3/4”

(502 mm)

30 1/4”

(768 mm)

6”

(152 mm)

10”

(254 mm)

43 1/4”

(1099 mm)

DL48-12M-D (6/8/15)