REACH-IN
REFRIGERATORS
REFRIGERATORS
Utilizing Environmentally Safe, CFC-free R-134a Refrigerant
DL1R-SS
DL2R-SS
DL3R-SS
Standard Features
•Modern, State-of-the-Art Styling
•Performance Rated “Plug” Refrigeration
System Utilizing Environmentally Safe R-134a
Refrigerant
•3" Non-CFC Polyurethane Foam Insulation
•Chrome-Plated Flow Line Handles
•Cam-Action Lift-Off Hinges
•Self-Closing Doors
•Magnetic Snap-In Door Gasket
•Cylinder Lock in Each Door
•Automatic Hot Gas Condensate Evaporator
•Adjustable 6" Stainless Steel Legs
•Heavy-Duty, Epoxy-Coated SteeL Shelves
•External Digital Thermometer
Models Available
• Half Door • Pass-Thru
• Remote • Consult Factory
Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)
RREEFFRRIIGGEERRAATTIIOONN SSYYSSTTEEMM
A “performance rated”, air-cooled, hermetically sealed,
capillary-type refrigeration system is installed on the top
of each refrigerator. Plasticized fin coil and air circulation fans are contained within a concealed “plug”-type
insulated housing, readily accessible on top of the cabinet and separate from the food zone to increase food
storage capacity. The entire “plug” system is fully
charged with environmentally safe R-134a refrigerant
and mounted on a sturdy steel, rail-type base which can
be easily removed if freezer conversion is desired.
Refrigerators are designed to maintain 38-40 degrees
Fahrenheit (3 to 5 degrees Centigrade) while operating
with an unrestricted air supply in a maximum ambient
temperature of 100 degrees Fahrenheit. All condensate water is evaporated by an automatic, non-electric,
corrosion-resistant condensate evaporator. A strict
quality-assurance team inspects all materials and components to certify that each model conforms to the most
exacting standards. All models are factory performance-tested for a minimum of 16 hours prior to crating.
CCAABBIINNEETT CCOONNSSTTRRUUCCTTIIOONN
All materials are of top quality, assembled to conform with strict quality-assurance requirements.
The cabinet front and doors are constructed of
heavy-gauge polished stainless steel for durability.
All cabinet joints and seams are sealed vapor-tight.
Case is of all metal, welded construction and internally supported and braced for a rigid unit construction. Cabinet design eliminated overlapping
panels with raw edges. Cabinet body and doors
are insulated with non-CFC, foamed-in-place
polyurethane foam with an average thickness of 3
inches to ensure increased energy efficiency. Fulllength louvered air grille located above the doors
allows equal air circulation to the condensing unit.
Easily removable, low-wattage, anti-sweat door
heaters concealed by a non-metallic, non-conductive, high-impact thermal breaker strip eliminate
condensate build-up on the cabinet front.
Automatic interior lighting is controlled by door
openings. Cabinets are equipped with 6 inch
adjustable stainless steel legs.
SSHHEELLVVIINNGG
Shelves are designed for heavy-duty use with
.306" diameter frame and brace members and
.140" diameter fill wires spaced 3/4" apart.
Shelves are welded steel and epoxy-coated
for a durable, long, rust-free service life.
Adjustments are in 1/2 inch increments and a
wide door opening allows the use of a a variety of optional pan and tray slide types.
DDOOOORR CCOONNSSTTRRUUCCTTIIOONN
Door shells are constructed of heavy-gauge
stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door corners are of welded construction and polished.
Replaceable snap-in door gaskets are selfadjusting, heavy-duty, magnetic type. Door
handles and hinges are chrome-plated and
non-corrosive. Doors are provided with builtin cylinder locks which are keyed alike.
Hinges are cam-action, lift-off type featuring
positive safety stop at 120 degrees.