Continental Refrigerator DL2RFE-SS, DL3RFFE-SS, DL3RRFE-SS Specifications
Standard Features
• Modern, State-of-the-Art Styling
• Performance Rate “Plug” Refrigeration
Systems
• 3" Non-CFC Polyurethane Foam Insulation
• Chrome-Plated Flow Line Handles
• Cam-Action Lift-Off Hinges
• Self-Closing Doors
• Magnetic Snap-In Gaskets
• Cylinder Lock In Each Door
• Automatic Hot Gas Condensate Evaporator
• Adjustable 6" Stainless Steel Legs
• External Digital Thermometers
• Automatic Electric Defrost on Freezer System
• Automatic Interior Lighting
EXTRA WIDE
SIDE BY SIDE
DUAL TEMPS
DUAL TEMPS
Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)
Optional Features & Accessories
• Half-Door • Pass-Thru
• Remote • Casters
• Stainless Steel • Pan Slides
Shelves • Correctional Facility
• Consult Factory Package
Utilizing Environmentally Safe, CFC-free R-134a & R-404A Refrigerant
DL2RFE-SS
DL3RRFE-SS
REFRIGERATION SYSTEM
Two “performance rated”, air cooled hermetically sealed,
capillary type refrigeration systems are installed on top of
each dual temp. Plasticized fin coil and air circulating fans
are contained within each concealed “plug” type insulated
housing, readily accessible on the top of the cabinet and
separate from each food zone to increase food storage
capacity. Both “plug” systems are fully charged with refrigerant and mounted on a sturdy steel, rail-type base which
can be easily removed. Refrigerator sections are designed
to maintain 38 to 40 degrees Fahrenheit (3 to 5 degrees
Centigrade), and Freezer sections 0 degrees Fahrenheit (18 degrees Centigrade) while operating with an unrestricted
air supply in a maximum ambient temperature of 100
degrees Fahrenheit. Freezer “Plug” systems have an automatic electric defrost timer which initiates defrost cycles at
predetermined intervals. All condensate water is evaporated by an automatic, non-electric, corrosion-resistant condensate evaporator. A strict quality-assurance team
inspects all materials and components to certify that each
model conforms to the most exacting standards. All models
are factory performance tested for a minimum of 16 hours
prior to crating.
CABINET CONSTRUCTION
All materials are of top quality, assembled to conform
with strict quality-assurance requirements. The cabinet front and doors are constructed of heavy-gauge
polished stainless steel for durability. All cabinet
joints and seams are sealed vapor tight. Case is of
all metal, welded construction and internally supported and braced for a rigid unit construction. Cabinet
design eliminates overlapping panels with raw edges.
Cabinet body, doors and plug are insulated with nonCFC, foamed-in-place polyurethane foam with an
average thickness of 3 inches to ensure increased
energy efficiency. Full-length louvered air grille located above the doors allows equal air circulation to the
condensing unit. Easily removable, low-wattage,
anti-sweat door heaters concealed by a non-metallic,
non-conductive, high-impact thermal breaker strip
eliminate condensate build-up on th cabinet front.
Automatic interior lighting is controlled by door openings. Cabinets are equipped with 6-inch adjustable
stainless steel legs.
SHELVING
Shelves are designed for heavy-duty use with
.306” diameter frame and brace members and
.140” diameter fill wires spaced 3/4” apart. Shelves
are welded steel and epoxy-coated for a durable,
long, rust-free service life. Adjustments are in 1/2
increments and a wide door opening allows the
use of a variety of optional pan and tray slide types.
DOOR CONSTRUCTION
Door shells are constructed of heavy gauge stainless steel and are internally braced and urethanefoamed-insulated for rigidity. Door corners are of
welded construction and polished. REplaceable
snap-in gaskets are self-adjusting, heavy-duty,
magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are provided with built-in cylinder locks which are keyed
alike. Hinges are cam action, lift-off type featuring
positive safety stop at 120 degrees.
DL23RFE506
DUAL TEMPS
A Division of National Refrigeration & A/C Products, Inc.
539 Dunksferry Road Bensalem, PA 19020
(800) 523-7138 Fax: (215) 244-9579
www.continentalrefrigerator.com
CHARACTERISTICS DL2RFE-SS DL3RRFE-SS DL3RFFE-SS
DIMENSIONAL DATA
Net Capacity (cu. ft.) 22/22 52/22 22/52
Width, Overall (in.) 57 85
1
/
2
851/
2
Depth, Overall (Incl. Hdls.) (in.) 351/
2
351/
2
351/
2
Depth (Less Door(s)) (in.) 32 32 32
Depth (Doors(s) Open 90°) (in.) 58 58 58
Clear Door Width (in.) 21
7
/
8
217/
8
217/
8
Clear Full-Door Height (in.) 585/
8
585/
8
585/
8
Clear Half-Door Height (in.) 271/
2
271/
2
271/
2
Height, Overall (Inc. 6” Legs)(in.) 831/
4
831/
4
861/
4
No. of Full Door(s) 2 3 3
No. of Half Door(s) 4 6 6
No. of Shelves 6 9 9
Shelf Area (sq. ft.) 20.4/20.4 40.8/20.4 20.4/40.8
Tray Slide Capacity (Half) 12 ea. 12 ea. 12 ea.
Tray Slide Capacity (Full) 25 ea. 25 ea. 25 ea
REFRIGERATION DATA
Condensing Unit Size (H.P.)
1
/4,1/
3
1
/3,1/
3
1
/4,1/
2
Capacity (BTU/hr)** 1940/1590 2560/1590 1940,2470
ELECTRICAL DATA
Cabinet Specifications
115/60/1 115/60/1 115/60/1
Feed Wires (Incl. Ground) 3/3 3/3 3/3
Condensing Unit Specs.
115/60/1 115/60/1 115/60/1
Total Amperes 6.9/7.6 9.1/7.6 6.9/9.8
Defrost Amperes 4.3 4.3 9.6
Power Supply Cord yes yes yes
SHIPPING DATA
Height – crated (in.) 851/
2
851/
2
851/
2
Width – crated (in.) 64 90 90
Depth – crated (in.) 42 42 42
Volume – crated (cu.ft.) 133 187 187
Weight Std – crated (lbs.) 630 835 835
Weight SS – crated (lbs.) 710 950 950
Weight Std – uncrated (lbs.) 460 625 625
Weight SS – uncrated (lbs.) 380 740 740
*Rating @ +25°F Evaporator, 90° Ambient (Refrigerator)
*Rating @ -15°F Evaporator, 90° Ambient (Freezer)
Note: All Specifications subject to change without notice.
Note: If the cabinet is located directly against wall and/or under low ceiling, a
minimum clearance of 2” required.
Cabinet upper side panels and refrigeration plug systems can be easily removed
and reinstalled at installation site where space limitations are confining.
Loading...