Continental Refrigerator DL3F-GD User Manual
DESIGNER LINE DISPLAY FREEZER
Project Name:
Model: DL3F-GD
3-Section Display Reach-In
Freezer with Hinged Glass Doors
DL3F-GD - Stainless steel front, aluminum end panels and interior
DL3F-SA-GD - Stainless steel exterior, aluminum interior
DL3F-SS-GD- Stainless steel exterior and interior
Designed to maintain NSF-7 temperatures in 100°F ambient.
Model Specified:
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Environmentally-safe R-404A refrigerant
Self contained, performance-rated “plug”
refrigeration system
Refrigeration system is readily accessible on top of
cabinet, separate from the “food zone” to increase
storage capacity
Automatic, hot gas condensate evaporator
Options and Accessories
(upcharge and lead times may apply)
Stainless steel case back Remote models
Additional epoxy-coated steel shelves Shallow depth
Chrome or stainless steel shelves Half glass doors
Pan slide assemblies Pass-thru (consult factory)
Rehinging of doors (consult factory) Solid doors (full or half)
Expansion valve system Increased refrigeration systems
Casters Special electrical req. (consult factory)
Dial thermometer
Consult factory for other model configurations, options and accessories.
CABINET ARCHITECTURE
3” non-CFC polyurethane foam insulation
Chrome-plated handles
Cam-action, lift-off hinges
Self-closing doors
Magnetic snap-in door gaskets
Cylinder lock in door
Heavy-duty, epoxy-coated steel shelves
Double-pane, tempered hinged glass doors
Adjustable 6” stainless steel legs
MODEL FEATURES
LED interior lighting
External digital thermometer
Energy saving switch for door heaters
Automatic electric defrost
Unique air duct system for optimum air flow
Cabinet upper side panels and refrigeration “plug” system
can be removed and reinstalled at job site
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
APPROVAL:
Model Specifications
DIMENSIONAL DATA
Net Capacity (cu. ft.) 72 (2039 cu l)
Width, Overall (in.) 78 (1981 mm)
Depth, Overall (incl. handles) (in.) 35 3/8 (899 mm)
Depth [less doors] (in.) 32 (813 mm)
Depth [doors open 90°] (in.) 55 1/2 (1410 mm)
Clear Door Width (in.) 19 3/8 (492 mm)
Clear Door Height (in.) 58 5/8 (1489 mm)
Height, Overall (incl. 6” legs) (in.) 88 1/4 (2242 mm)
No. of Doors 3
No. of Shelves 12
Shelf Area (sq. ft.) 71.4 (6.6 sq m)
Tray Slide Capacity 24 ea.
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1 1/2
Capacity (BTU/Hr)* 6050
ELECTRICAL DATA
Voltage (int’l)
Feed Wires (incl. ground) 4
Total Amps (int’l) 22.5 (19.5)
Defrost Amps (int’l) 9.6 (4.8)
10 ft. Cord/Plug (int’l) No (No)
SHIPPING DATA
Height - Crated (in.) 85 1/2 (2172 mm)
Width - Crated (in.) 90 (2286 mm)
Depth - Crated (in.) 42 (1067 mm)
Volume - Crated (cu. ft.) 187 (5295 cu l)
Weight Std - Crated (lbs.) 820 (372 kg)
Weight SS - Crated (lbs.) 935 (424 kg)
Weight Std - Uncrated (lbs.) 620 (281 kg)
Weight SS - Uncrated (lbs.) 735 (333 kg)
* Rating @ -15°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
®
© Copyright 2015. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
115/208-230/60/1
(220/50/1)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
MADE IN THE U.S.A.
Model Plan Views
78”
(1981 mm)
19 3/8”
(492 mm)
DOOR
OPENING
FRONT VIEW
35 3/8”
(899 mm)
32”
(813 mm)
29”
(737 mm)
SIDE VIEW
IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
clearance of 12” is required.
REFRIGERATION SYSTEM
A “performance rated”, air-cooled, hermetically
sealed, capillary-type refrigeration system is installed on the top of each freezer. Plasticized fin
coil and air circulation fans are contained within
a concealed “plug”-type insulated housing, readily accessible on top of the cabinet and separate
from the food zone to increase food storage capacity. The entire “plug” system is fully charged
with environmentally safe R-404A refrigerant and
mounted on a sturdy steel, rail-type base which
can be easily removed if refrigerator conversion
is desired. Freezers are designed to maintain 0°F
(-18° Centigrade) while operating with an unrestricted air supply in a maximum ambient temperature of 100°F. All condensate water is evaporated
by an automatic, non-electric, corrosion-resistant
condensate evaporator. A strict quality-assurance
team inspects all materials and components to certify that each model conforms to the most exacting
standards. All models are factory performancetested for a minimum of 16 hours prior to crating.
INSULATION
All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.
SHELVING
Shelves are designed for heavy-duty use with .306”
diameter frame and brace members and .140” diameter fill wires spaced 3/4” apart. Shelves are
welded steel and epoxy-coated for a durable, long,
rust-free service life. Adjustments are in 1 inch increments and a wide door opening allows the use
of a variety of optional pan and tray slide types.
58 5/8”
(1489 mm)
DOOR
OPENING
58 1/8”
(1476 mm)
CABINET CONSTRUCTION
All materials are of top quality, assembled to conform with strict quality-assurance requirements.
The cabinet front is constructed of heavy-gauge
polished stainless steel for durability. All cabinet
joints and seams are sealed vapor-tight. Case is of
all metal, welded construction and internally supported and braced for a rigid unit construction.
Cabinet design eliminated overlapping panels with
raw edges. Cabinet body is insulated with non-CFC,
foamed-in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length louvered air grille located
above the doors allows equal air circulation to the
condensing unit. Easily removable, low-wattage,
anti-sweat door heaters concealed by a non-metallic, non-conductive, high-impact thermal breaker
strip eliminate condensate build-up on the cabinet
front. Automatic interior lighting is activated by
an easily accessible interior switch. Cabinets are
equipped with 6 inch adjustable stainless steel legs.
DOOR CONSTRUCTION
Hinged glass door: double-pane, tempered glass
is encased by a heated, heavy-duty aluminum extruded frame. Replaceable, snap-in door gaskets
are self-adjusting, heavy-duty, magnetic type.
Door handles and hinges are chrome-plated and
non-corrosive. Doors are provided with built-in,
cylinder locks which are keyed alike. Hinges are
cam-action, lift-off type featuring positive safety
stop at 120 degrees.
6”
(152 mm)
88 1/4”
(2242 mm)
DL3F-GD (3/6/15)
Loading...