Continental Refrigerator DL36-10C-FB User Manual
DESIGNER LINE SANDWICH UNIT
Project Name:
Model: DL36-10C-FB
36” Cutting Top Sandwich Unit
Refrigerator with Solid Doors - 10 Pans
Front Breathing
Stainless steel exterior and interior.
Certified under NSF-7 to maintain temperatures in 86°F ambient
and designed to maintain NSF-7 temperatures in 100°F ambient.
Model Specified:
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Performance-rated refrigeration system
Environmentally-safe R-134a refrigerant
Unique air flow distribution allows
pan product to maintain 33° - 41°F
Automatic, energy saving, non-electric
condensate evaporator
Non-corrosive, plasticized fin evaporator coil
Easily serviceable, back mounted compressor
Options and Accessories
(upcharge and lead times may apply)
Glass doors in lieu of solid doors - GD models Stainless steel shelves
Stainless steel finished back in lieu of aluminum Expansion valve system
Overshelves (single or double) Rear-mounted cutting board
Additional epoxy-coated steel shelves Flat insulated night cover
Automatic, electric condensate evaporator Remote models
Custom pan openings Door locks
Consult factory for other model configurations, options and accessories.
CABINET ARCHITECTURE
2” non-CFC polyurethane foam insulation
Spring loaded, self closing doors
Magnetic snap-in door gaskets
Heavy-duty, epoxy-coated steel shelves
19” deep, full length nylon cutting board
Insulated lid
3 5/8” casters
Completely enclosed, vented and removable case back
MODEL FEATURES
(10) 1/6 size non-recessed pans, 4” deep
Interior hanging thermometer
Field rehingeable doors
Front breathers are a unique, field assembled, bottom mounted ventilation
system designed to allow cabinets to be flush against a wall or built into a
counter to conserve space.
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
APPROVAL:
Model Specifications
Model Plan Views
DIMENSIONAL DATA
Net Capacity (cu. ft.) 10.3 (292 cu l)
1/6 Size Pans (4” deep) 10
Width, Overall (in.) 36 (914 mm)
Depth, Overall (in.)
(incl. cutting board & bumpers)
38 1/4 (972 mm)
Depth, Body Only (less doors) (in.) 27 1/2 (699 mm)
Depth, Cutting Board (in.) 19 (483 mm)
Height, Overall (in.)
(incl. 3 5/8” casters)
40 7/8 (1038 mm)
Shelf Area (sq. ft.) 4.6 (.4 sq m)
No. of Shelves 2
No. of Doors 2
Interior Depth (in.) 20 (508 mm)
Interior Height (in.) 26 1/4 (667 mm)
Interior Width (in.) 32 (813 mm)
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1/5
Capacity (BTU/Hr)* 1620
ELECTRICAL DATA
Voltage (int’l) 115/60/1 (220/50/1)
Fans 2
Total Amps (int’l) 6.3 (3.7)
10 ft. Cord/Plug [attached] (int’l) Yes (No)
SHIPPING DATA
Weight (lbs.) 254 (115 kg)
Height - Crated (in.) 43 1/4 (1099 mm)
Width - Crated (in.) 43 (1092 mm)
Depth - Crated (in.) 46 (1168 mm)
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
FRONT VIEW
SIDE VIEW
(279 mm)
46 9/32”
(1176 mm)
11”
23 5/8”
(600 mm)
OPENING
34”
(864 mm)
DOOR
13 9/16”
(344 mm)
DOOR
OPENING
38 1/4”
(972 mm)
(889 mm)
19 3/8”
(492 mm)
14 7/8”
(378 mm)
10 1/4”
(260 mm)
36”
(914 mm)
35”
27 1/2”
(699 mm)
1”
(25 mm)
30 1/4”
(768 mm)
3 5/8” (92 mm)
40 7/8”
(1038 mm)
Equipped with one NEMA-5-15P Plug
(varies by country)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2014. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
3 1/4”
(83 mm)
PAN TOP CONFIGURATION
REFRIGERATION SYSTEM
Self-contained refrigeration system is rear mounted, concealed behind a removable louvered cover.
Full-length front air grille allows for even air circulation to condensing unit. A “performance rated”,
air-cooled, hermetically sealed, capillary type refrigeration system is installed in model. Plasticized
finned coil and air circulating fans are contained
within an easily accessible rear mounted housing. Unique airflow design allows the cabinet to be
enclosed on both sides or mounted flush against
a wall. Refrigeration system, fully charged with R134a refrigerant, is designed to maintain 38°-41°F
while operating with an unrestricted air supply in
an ambient temperature of 100°F. All condensate
water is directed to a non-electric condensate vaporizer located in the compressor compartment,
no plumbing is required. A strict quality assurance
team inspects all materials and components to certify the model conforms to the most exacting standards. Model is performance tested for a minimum
of 16 hours prior to crating.
(914 mm)
19”
(483 mm)
36”
CABINET CONSTRUCTION
Materials are top quality, assembled under rigid
supervision conforming to strict quality assurance
requirements. Case is welded metal construction,
internally supported and braced for rigid unit construction. Exterior, interior and worktop are heavygauge polished stainless steel. Design eliminates
overlapping panels with raw edges. Interior corners
are rounded with 1/4” radius. Joints and seams are
vapor-tight sealed. Easily removable anti-sweat
door heaters, concealed by non-metallic, non-conductive, high impact thermal breaker strips, eliminates condensation build-up on case front.
DOOR CONSTRUCTION
Door shells are constructed of heavy-gauge stainless steel and are internally braced and urethanefoam-insulated for rigidity. Door corners are of
welded construction and polished. Replaceable
snap-in door gaskets are self adjusting, heavyduty, magnetic type. Door handles and hinges
are chrome-plated and non-corrosive. Hinges are
spring loaded, heavy duty and self-closing.
DL36-10C-FB (10/6/14)
Loading...