Continental Refrigerator DL32-SS-U User Manual

DESIGNER LINE UNDERCOUNTER REFRIGERATOR

Project Name:

Model: DL32-SS-U

32” Undercounter Refrigerator
with Solid Door

Stainless steel exterior and interior with stainless steel top.

Designed to maintain NSF-7 temperatures in 100°F ambient.

Model Specied:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Performance-rated refrigeration system
Environmentally-safe R-134a refrigerant
Automatic, energy-saving, non-electric

condensate evaporator

Non-corrosive, plasticized n evaporator coil

Easily serviceable back mounted compressor

Options and Accessories

(upcharge and lead times may apply)

Stainless steel back Automatic electric condensate evaporator
Stainless steel shelves Expansion valve system
Additonal epoxy-coated steel shelves Door lock

Drawers in lieu of door

Consult factory for other model congurations, options and accessories.

Special electrical requirements
(consult factory)

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation
Spring loaded, self closing door
Magnetic snap-in door gasket
Heavy-duty, epoxy-coated steel shelf
Completely enclosed, vented and removable case back
1 3/8” diameter plate casters (factory installed)

MODEL FEATURES

Electronic controller w/ digital display
2” high, bottom mounted front breather air divider
Field rehingeable door

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

APPROVAL:

Model Specications

DIMENSIONAL DATA

Net Capacity (cu. ft.) 9.0 (255 cu l)
Width, Overall (in.) 32 (813 mm)
Depth, Overall (in.)

(incl. handle & bumpers)

Height, Overall (in.)

(incl. 1 3/8” plate casters)

Shelf Area (sq. ft.) 3.9 (.4 sq m)
No. of Shelves 1
No. of Doors 1
Interior Depth (in.) See Drawing
Interior Height (in.) 26 1/4 (667 mm)
Interior Width (in.) 28 (711 mm)

31 9/16 (802 mm)

31 13/16 (808 mm)

Model Plan Views

32”

(813 mm)

27 3/8”

(695 mm)

DOOR OPENING

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/5
Capacity (BTU/Hr)* 1620

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1)
Fans 2
Total Amps (int’l) 6.3 (3.7)
10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Weight (lbs.) 221 (100 kg)
Height - Crated (in.) 43 1/4 (1099 mm)
Width - Crated (in.) 39 (991 mm)
Depth - Crated (in.) 37 1/4 (946 mm)

* Rating @ +25°F evaporator, 90°F ambient

Figures in parentheses reect metric equivalents rounded to the nearest

whole unit.

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative
products, specifications subject to change without notice.

FRONT VIEW

31 9/16”

1 1/2”

(38 mm)

(802 mm)

30”

(762 mm)

19 3/8”

(492 mm)

23 3/4”

(603 mm)

DOOR

OPENING

14 7/8”

(378 mm)

29 3/4”

(756 mm)

31 13/16”

(808 mm)

10 1/4”

(260 mm)

2 1/16”

SIDE VIEW

NOTE: For proper operation, the area under and in front of the cabinet must not be obstructed in any way.

REFRIGERATION SYSTEM

The self-contained refrigeration system is rear
mounted, concealed behind a removable back cover.

Bottom mounted, low prole air divider allows for

even air circulation to condensing unit. A “perfor­mance-rated”, air-cooled,hermetically sealed, capil­lary type refrigeration system is installed in model.

Plasticized nned coil and air circulating fans are

contained within an easily accessible rear mounted

housing. Unique airow design allows the cabinet to
be enclosed on both sides or mounted ush against

a wall. Refrigeration system, fully charged with R­134a refrigerant, is designed to maintain 38°-41°F
while operating with an unrestricted air supply in an
ambient temperature of 100°F. All condensate water
is directed to a non-electric condensate vaporizer lo­cated in the compressor compartment, no plumbing
is required. A strict quality assurance team inspects
all materials and components to certify the model
conforms to the most exacting standards. Model is
performance tested for a minimum of 16 hours prior
to crating.

INSULATION

All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.

CABINET CONSTRUCTION

Materials are top quality, assembled under rigid
supervision conforming to strict quality assurance
requirements. Case is welded metal construction,
internally supported and braced for rigid unit con­struction. Exterior cabinet back and bottom are
heavy-gauge galvanized steel.

Design eliminates overlapping panels with raw
edges. Interior corners are rounded with 1/4” radi­us. Joints and seams are vapor-tight sealed. Easily
removable anti-sweat door heaters, concealed by
non-metallic, non-conductive, high impact ther­mal breaker strips, eliminates condensation build­up on case front.

DOOR CONSTRUCTION

Door shells are constructed of heavy-gauge stain­less steel and are internally braced and urethane­foam-insulated for rigidity. Door corners are of
welded construction and polished. Replaceable
snap-in door gaskets are self adjusting, heavy­duty, magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Hinges are
spring loaded, heavy duty and self-closing.

(52 mm)

®

MADE IN THE U.S.A.

© Copyright 2017. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.

DL32-SS-U (1/18/17)