Continental Refrigerator DL2WI User Manual

DESIGNER LINE ROLL-IN WARMER

Project Name:

Model: DL2WI

2-Section Roll-In Warmer
with 66¼” Cart Capacity

Standard - Stainless steel front, aluminum end panels and interior
Suffix SA- Stainless steel exterior, aluminum interior
Suffix SS - Stainless steel exterior and interior

Options and Accessories

(upcharge and lead times may apply)

Stainless steel case back Special electrical req. (consult factory)
Chrome or stainless steel shelves
Rehinging of doors (consult factory) • One way security screws
Custom laminates • Locking hasp (lock not included)
Half doors • Stainless steel mesh cover
Roll-Thru • Coverless hinges
Hinged glass doors

Consult factory for other model configurations, options and accessories.

Correctional Facility Options

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

HEATING SYSTEM

Self-contained, performance-rated “plug” warming system
90°F - 180°F temperature range
Humidity relief vent with master on/off control switch
Unique air flow distribution ducts
Heating system is accessible on top of cabinet,

separate from the food zone

CABINET ARCHITECTURE

Removable stainless steel rack guides
Removable stainless steel ramps
Reinforced stainless steel floor
3” non-CFC polyurethane foam insulation
Chrome-plated flow line handles
Cam action, lift off hinges
Magnetic snap-in door gaskets
Cylinder lock in door
Self-closing doors
66 1/2” high door openings (66 1/4”H rack capacity*)

Standard Finish

Stainless steel front, aluminum end panels and interior

-SA Finish

Stainless steel exterior, aluminum interior

-SS Finish

Stainless steel exterior and interior

MODEL FEATURES

Automatic interior lighting
External thermostat control
External digital thermometer

* Racks not supplied

IMPORTANT NOTE: Cabinet upper side panels and heating “plug” system
can be easily removed and reinstalled at installation site where space
limitations are confining.

APPROVAL:

Model Specifications

35 3/8”

Model Plan Views

DIMENSIONAL DATA

Net Capacity (cu. ft.) 64 (1812 cu l)
Width, Overall (in.) 68 1/2 (1740 mm)
Depth, Overall (incl. handles) (in.) 35 3/8 (899 mm)
Depth [less doors] (in.) 32 (813 mm)
Depth [doors open 90°] (in.) 65 (1651 mm)
Clear Door Width (in.) 27 3/8 (695 mm)
Clear Full Door Height (in.) 66 1/2 (1676 mm)
Height, Overall (in.) 86 (2184 mm)
No. of Door(s) 2
Rack Capacity** 2 ea.

ELECTRICAL DATA

Voltage (int’l)

115/208-230/60/1

(220/50/1)
Total Wattage @ 208-230 Volts 3000
Feed Wires (incl. ground) 4
Total Amps (int’l) 14.5 (13.8)
10 ft. Cord/Plug [attached] (int’l) No (No)

SHIPPING DATA

Height - Crated (in.) 90 (2286 mm)
Width - Crated (in.) 77 (1956 mm)
Depth - Crated (in.) 42 (1067 mm)
Volume - Crated (cu. ft.) 168 (4757 cu l)
Weight Std - Crated (lbs.) 680 (308 kg)
Weight SS - Crated (lbs.) 720 (327 kg)
Weight Std - Uncrated (lbs.) 540 (245 kg)
Weight SS - Uncrated (lbs.) 575 (261 kg)

** Maximum rack size including wheels - 27”W x 29”D x 66 1/4”H

Figures in parentheses reflect metric equivalents rounded to the nearest
whole millimeter.

15 1/2”

(394 mm)

86”

(2184 mm)

70 1/2”

(1791 mm)

68 1/2”

6”

(152 mm)

(1740 mm)

(899 mm)

32”

(813 mm)

FRONT VIEW

SIDE VIEW

IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
clearance of 12” is required.

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative
products, specifications subject to change without notice.

®

MADE IN THE U.S.A.

© Copyright 2013. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.

HEATING SYSTEM (Range 90°F - 180°F)

Electrically operated heating system is controlled
by means of a highly sensitive calibrated thermo­stat mounted on the cabinet front. Fin strip heating
elements are located at the base of the interior. Air
circulating blower located in a top mounted, con­cealed “plug” housing distributes heat throughout
product zone, assuring uniform cabinet tempera­tures. Cabinet top has a built-in humidity relief
vent. The entire “plug” system is mounted on a
sturdy steel, rail-type base which can be easily
removed if refrigerator or freezer conversion is de­sired. A strict quality assurance team inspects all
material and components to certify that each model
conforms to the most exacting standards. All mod­els are factory performance tested for a minimum
of 16 hours prior to crating.

INSULATION

All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.

CABINET CONSTRUCTION

All materials are of top quality, assembled to con­form with strict quality-assurance requirements.

The cabinet front is constructed of heavy-gauge
polished stainless steel for durability. All cabinet
joints and seams are sealed vapor-tight. Case is of
all metal, welded construction and internally sup­ported and braced for a rigid unit construction.
Cabinet design eliminated overlapping panels with
raw edges. Cabinet body is insulated with non-CFC,
foamed-in-place polyurethane foam with an aver­age thickness of 3 inches to ensure increased en­ergy efficiency. Automatic interior lighting is con­trolled by door openings. Cabinets are equipped
with an easily removable, stainless steel ramp and
interior rack guides.

DOOR CONSTRUCTION

Solid hinged door shells are constructed of heavy­gauge stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door corners
are welded construction and polished. Replaceable
snap-in door gaskets are self-adjusting, heavy­duty, magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are pro­vided with built-in cylinder locks which are keyed
alike. Hinges are cam action, lift-off type featuring
positive safety stop at 120 degrees.

DL2WI (8/14/13)