Continental Refrigerator DL2RW-PT User Manual
DESIGNER LINE REFRIGERATOR/WARMER
Project Name:
Model: DL2RW-PT
2-Section Dual Temp, Pass-Thru
Refrigerator/Warmer
Refrigerator (left)/Warmer (right). Sections can be changed at time of order.
DL2RW-PT - Stainless steel front, aluminum end panels and interior
DL2RW-SA-PT - Stainless steel exterior, aluminum interior
DL2RW-SS-PT - Stainless steel exterior and interior
Designed to maintain NSF-7 temperatures in 100°F ambient.
Options and Accessories
(upcharge and lead times may apply)
Stainless steel case back Hinged glass doors
Chrome or stainless steel shelves Increased refrigeration systems
Pan slide assemblies Special electrical req. (consult factory)
Rehinging of doors (consult factory)
Expansion valve system Additional epoxy-coated steel shelves
Casters Wine display
Dial thermometer
Remote models • One way security screws
Custom laminates • Locking hasp (lock not included)
Half doors • Stainless steel mesh cover
Reach-In • Coverless hinges
Shallow depth
Consult factory for other model configurations, options and accessories.
Refrigerator Section Only
Correctional Facility Options
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Model Specified:
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
REFRIGERATOR SECTION
Environmentally-safe R-134a refrigerant
Self-contained, performance-rated “plug”
refrigeration system
Energy saving switch for door heaters
Heavy-duty, epoxy-coated steel shelves
WARMER SECTION
Separate, self-contained, performance-rated
warming system
90°F to 180°F temperature range
Heavy duty, chrome-plated steel shelves
Top mounted heating plenum “plug” with circulating fan
Humidity relief vent
Exterior temperature control with master on/off switch
Stainless steel strip heaters located in base of interior
CABINET ARCHITECTURE
3” non-CFC polyurethane foam insulation
Smooth, polished chrome workflow door handles
Cam action, lift off hinges
Self-closing doors
Magnetic snap-in door gaskets
Cylinder lock in door
Adjustable 6” stainless steel legs
MODEL FEATURES
Automatic interior lighting
External digital thermometers
Automatic, hot gas condensate evaporator
Refrigeration/heating system is readily accessible
on top of cabinet, separate from the “food zone”
Top and side air distribution ducts
Cabinet upper side panels and refrigeration “plug”
system can be removed and reinstalled on job site
APPROVAL:
Model Specifications
DIMENSIONAL DATA
Net Capacity (cu. ft.) 21 / 21 (595 / 595 cu l)
Width, Overall (in.) 52 (1321 mm)
Depth, Overall (in.) (incl. handles) 38 3/4 (984 mm)
Depth [less doors] (in.) 32 (813 mm)
Depth [doors open 90°] (in.) 79 (2007 mm)
Clear Door Width (in.) 19 3/8 (492 mm)
Clear Door Height (in.) 58 5/8 (1489 mm)
Height, Overall (in.) (incl. 6” legs) 83 1/4 (2115 mm)
No. of Doors 4
No. of Shelves 6
Shelf Area (sq. ft.) (total area) 40.8 (3.8 sq m)
Tray Slide Capacity (per section) 24
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1/4
Capacity (BTU/Hr)* 1940
ELECTRICAL DATA
Voltage [refrigerator] (int’l) 115/60/1 (220/50/1)
Voltage [warmer] 115-208/230-60-1
Feed Wires (incl. ground) 3 / 4
Total Amps (int’l) 5.5 (3.5) / 7.8 (7.2)
Total Wattage @ 208-230 volts 2250
10 ft. Cord/Plug (int’l) Yes (No) / No
SHIPPING DATA
Height - Crated (in.) 85 1/2 (2172 mm)
Width - Crated (in.) 64 (1626 mm)
Depth - Crated (in.) 42 (1067 mm)
Volume - Crated (cu. ft.) 133 (3766 cu l)
Weight Std - Crated (lbs.) 595 (270 kg)
Weight SS - Crated (lbs.) 675 (306 kg)
Weight Std - Uncrated (lbs.) 425 (193 kg)
Weight SS - Uncrated (lbs.) 505 (229 kg)
* Rating @ +25°F evaporator, 90°F ambient (refrigerator)
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
Refrigerator Section Only:
Equipped with one NEMA-5-15P Plug (varies by country)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2015. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
Model Plan Views
19 3/8”
(492 mm)
DOOR OPENING
52”
(1321 mm)
conforms to the most exacting standards. All models are factory performance tested for a minimum
of 16 hours prior to crating.
CABINET CONSTRUCTION
All materials are top quality, assembled to conform
with strict quality-assurance requirements. The
cabinet front and doors are constructed of heavygauge polished stainless steel for durability. All
cabinet joints and seams are sealed vapor-tight.
Case is of all metal, welded construction and internally supported and braced for a rigid unit construction. Cabinet design eliminated overlapping
panels with raw edges. Cabinet body and doors are
insulated with non-CFC, foamed-in-place polyurethane foam with an average thickness of 3 inches
to ensure increased energy efficiency. Full-length
louvered air grille located above the doors allows
equal air circulation to the condensing unit. Easily
removable, low-wattage, anti-sweat door heaters
concealed by a non-metallic, non-conductive, highimpact thermal breaker strip eliminate condensate
build-up on the cabinet front. Automatic interior
lighting is controlled by door openings. Cabinets
are equipped with 6” adjustable stainless steel legs.
DOOR CONSTRUCTION
Door shells are constructed of heavy-gauge stainless steel and internally braced and urethane foam
insulated for rigidity. Door corners are welded construction and polished. Replaceable snap-in door
gaskets are self adjusting, heavy-duty, magnetic
type. Door handles and hinges are chrome-plated
and non-corrosive. Doors are provided with builtin cylinder locks which are keyed alike. Hinges are
cam-action, lift-off type featuring positive safety
stop at 120 degrees.
DL2RW-PT (7/10/15)
58 5/8”
(1489 mm)
DOOR OPENING
38 3/4”
(984 mm)
32”
(813 mm)
58 1/8”
(1476 mm)
77 1/4”
(1962 mm)
83 1/4”
(2115 mm)
6”
(152 mm)
FRONT VIEW
SIDE VIEW
IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
clearance of 12” is required.
REFRIGERATION SYSTEM
A “performance rated”, air-cooled, hermetically
sealed, capillary-type refrigeration system is installed on the top of each refrigerator. Plasticized
fin coil and air circulation fans are contained within
a concealed “plug”-type insulated housing, readily accessible on top of the cabinet and separate
from the food zone to increase food storage capacity. The entire “plug” system is fully charged
with environmentally safe R-134a refrigerant and
mounted on a sturdy steel, rail-type base which can
be easily removed if freezer conversion is desired.
Refrigerators are designed to maintain 38°F-40°F
(3°-5° Centigrade) while operating with an unrestricted air supply in a maximum ambient temperature of 100°F. All condensate water is evaporated
by an automatic, non-electric, corrosion-resistant
condensate evaporator. A strict quality-assurance
team inspects all materials and components to certify that each model conforms to the most exacting
standards. All models are factory performancetested for a minimum of 16 hours prior to crating.
HEATING SYSTEM (Range 90°F - 180°F)
Electrically operated heating system is controlled
by means of a highly sensitive calibrated thermostat mounted on the cabinet front. Fin strip heating
elements are located at the base of the interior. Air
circulating blower located in a top mounted, concealed “plug” housing distributes heat throughout
product zone, assuring uniform cabinet temperatures. Cabinet top has a built-in humidity relief
vent. The entire “plug” system is mounted on a
sturdy steel, rail-type base which can be easily
removed if refrigerator or freezer conversion is desired. A strict quality assurance team inspects all
material and components to certify that each model
Loading...