Continental Refrigerator DL2RWE User Manual
DESIGNER LINE REFRIGERATOR/WARMER
Project Name:
Model: DL2RWE
2-Section Extra-Wide Dual Temp
Reach-In Refrigerator/Warmer
DL2RWE - Stainless steel front, aluminum end panels and interior
DL2RWE-SA - Stainless steel exterior, aluminum interior
DL2RWE-SS- Stainless steel exterior and interior
Options and Accessories
(upcharge and lead times may apply)
Stainless steel case back Hinged glass doors
Chrome or stainless steel shelves Increased refrigeration systems
Pan slide assemblies Special electrical req. (consult factory)
Rehinging of doors (consult factory)
Expansion valve system Additional epoxy-coated steel shelves
Casters Wine display
Dial thermometer
Remote models • One way security screws
Custom laminates • Locking hasp (lock not included)
Half doors • Stainless steel mesh cover
Pass-Thru • Coverless hinges
Shallow depth
Consult factory for other model configurations, options and accessories.
Refrigerator Section Only
Correctional Facility Options
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Model Specified:
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
REFRIGERATOR SECTION
Separate, self-contained, performance-rated “plug”
refrigeration system
Environmentally-safe R-134a refrigerant
Energy saving switch for door heater
Heavy-duty, epoxy-coated steel shelves
WARMER SECTION
Separate, self-contained, performance-rated
warming system
90°F to 180°F temperature range
Heavy duty, chrome-plated steel shelves
Top mounted heating plenum “plug” with circulating fan
Humidity relief vent
Exterior temperature control with master on/off
Stainless steel strip heaters located in base of interior
CABINET ARCHITECTURE
3” non-CFC polyurethane foam insulation
Chrome-plated flow line handles
Cam action, lift off hinges
Self-closing doors
Magnetic snap-in door gaskets
Cylinder lock in door
Adjustable 6” stainless steel legs
MODEL FEATURES
Automatic interior lighting
External digital thermometers
Automatic, hot gas condensate evaporator
Refrigeration/heating system is readily accessible on top
of cabinet, separate from the “food zone” to increase
storage capacity
Unique air duct system for optimum air flow
IMPORTANT NOTE: Cabinet upper side panels “plug” systems can be
easily removed and reinstalled at installation site where space limitations
are confining.
APPROVAL:
Model Specifications
DIMENSIONAL DATA
Net Capacity (cu. ft.) 21/21 (595/595 cu l)
Width, Overall (in.) 57 (1448 mm)
Depth, Overall (incl. handles) (in.) 35 3/8 (899 mm)
Depth [less doors] (in.) 32 (813 mm)
Depth [doors open 90°] (in.) 58 (1473 mm)
Clear Door Width (in.) 21 7/8 (556 mm)
Clear Door Height (in.) 58 5/8 (1489 mm)
Height, Overall (incl. 6” legs) (in.) 83 1/4 (2115 mm)
No. of Doors 2
No. of Shelves 6
Shelf Area (sq. ft.) 40.8 (3.8 sq m)
Tray Slide Capacity (refrigerator) 24 ea.
Tray Slide Capacity (warmer) 19 ea.
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1/4
Capacity (BTU/Hr)* 1940
ELECTRICAL DATA [R / W]
Voltage [R] (int’l) 115/60/1 (220/50/1)
Voltage [W] 115-208/230-60-1
Feed Wires (incl. ground) 3 / 4
Total Amps (int’l) 5.5 (3.5) / 7.8 (7.2)
Total Wattage @ 208-230 volts 2250
10 ft. Cord/Plug [attached] (int’l) Yes (No) / No
SHIPPING DATA
Height - Crated (in.) 85 1/2 (2172 mm)
Width - Crated (in.) 64 (1626 mm)
Depth - Crated (in.) 42 (1067 mm)
Volume - Crated (cu. ft.) 133 (3766 cu l)
Weight Std - Crated (lbs.) 575 (261 kg)
Weight SS - Crated (lbs.) 655 (297 kg)
Weight Std - Uncrated (lbs.) 405 (184 kg)
Weight SS - Uncrated (lbs.) 485 (220 kg)
* Rating @ +25°F evaporator, 90°F ambient (refrigerator)
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
Refrigerator Section Only:
Equipped with one NEMA-5-15P Plug (varies by country)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2013. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
Model Plan Views
21 7/8”
(556 mm)
DOOR OPENING
57”
(1448 mm)
35 3/8”
32”
58 1/8”
(1476 mm)
CABINET CONSTRUCTION
All materials are of top quality, assembled to conform with strict quality-assurance requirements.
The cabinet front is constructed of heavy-gauge
polished stainless steel for durability. All cabinet
joints and seams are sealed vapor-tight. Case is of
all metal, welded construction and internally supported and braced for a rigid unit construction.
Cabinet design eliminated overlapping panels with
raw edges. Cabinet body is insulated with non-CFC,
foamed-in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length louvered air grille located
above the doors allows equal air circulation to the
condensing unit. Easily removable, low-wattage,
anti-sweat door heater (refrigerator section) concealed by a non-metallic, non-conductive, highimpact thermal breaker strip eliminates condensate
build-up on the cabinet front. Automatic interior
lighting is activated by an easily accessible interior
switch. Cabinets are equipped with 6 inch adjustable stainless steel legs.
DOOR CONSTRUCTION
Solid hinged door shells are constructed of heavygauge stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door corners
are welded construction and polished. Replaceable
snap-in door gaskets are self-adjusting, heavyduty, magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are provided with built-in cylinder locks which are keyed
alike. Hinges are cam action, lift-off type featuring
positive safety stop at 120 degrees.
DL2RWE (9/9/13)
58 5/8”
(1489 mm)
DOOR OPENING
(737 mm)
(899 mm)
(813 mm)
29”
77 1/4”
(1962 mm)
83 1/4”
(2115 mm)
6”
(152 mm)
FRONT VIEW
SIDE VIEW
IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
clearance of 12” is required.
REFRIGERATION SYSTEM
A “performance rated”, air-cooled, hermetically
sealed, capillary-type refrigeration system is installed on the top of each refrigerator. Plasticized
fin coil and air circulation fans are contained within
a concealed “plug”-type insulated housing, readily accessible on top of the cabinet and separate
from the food zone to increase food storage capacity. The entire “plug” system is fully charged
with environmentally safe R-134a refrigerant and
mounted on a sturdy steel, rail-type base which can
be easily removed if freezer conversion is desired.
Refrigerators are designed to maintain 38°F-40°F
(3°-5° Centigrade) while operating with an unrestricted air supply in a maximum ambient temperature of 100°F. All condensate water is evaporated
by an automatic, non-electric, corrosion-resistant
condensate evaporator. A strict quality-assurance
team inspects all materials and components to certify that each model conforms to the most exacting
standards. All models are factory performancetested for a minimum of 16 hours prior to crating.
HEATING SYSTEM (Range 90°F - 180°F)
Electrically operated heating system is controlled
by means of a highly sensitive calibrated thermostat mounted on the cabinet front. Fin strip heating
elements are located at the base of the interior. Air
circulating blower located in a top mounted, concealed “plug” housing distributes heat throughout
product zone, assuring uniform cabinet temperatures. Cabinet top has a built-in humidity relief vent.
The entire “plug” system is mounted on a sturdy
steel, rail-type base which can be easily removed if
refrigerator or freezer conversion is desired.
Loading...