Continental Refrigerator DL1R-SS-GD, DL3R-SS-GD, DL2R-SS-GD Specifications

DISPLAY

REFRIGERATORS

REFRIGERATORS

Utilizing Environmentally Safe, CFC-free R-134a Refrigerant

Standard Features

• Modern, State-of-the-Art Styling

• Performance rated “Plug” Refrigeration System
Utilizing Environmentally Safe R-134a Refrigerant

• 3" Non-CFC Polyurethane Foam Insulation

• Cam-Action Lift-Off Hinges

• Self-Closing Doors

• Magnetic Snap-In Door Gaskets

• Cabinet Upper Side Panels and Refrigeration “Plug”
System can be Easily Removed and Reinstalled at
Job-Site Where Space Limitations are Confining

• Cylinder Lock In Each Door

• Automatic Hot Gas Condensate Evaporator

• Refrigeration System is Readily Accessible on Top of
the Cabinet and Separate from the Food Zone
to Increase Food Storage Capacity

• Adjustable 6" Stainless Steel Legs

• Heavy-Duty, Epoxy-Coated Steel Shelves

• External Digital Thermometer

• Double-pane, Tempered Hinged Glass Doors

• Fluorescent Interior Lighting

Models Available

• Half Door • Pass-Thru

• Remote • Consult Factory

Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)

DL1R-SS-GD

DL2R-SS-GD

DL3R-SS-GD

Refrigeration System

A “Performance Rated”, air cooled, hermetically
sealed, capillary-type refrigeration system is installed
on the top of each refrigerator. Plasticized fin coil and
air circulating fans are contained within a concealed
“plug” type insulated housing, readily accessible on
top of the cabinet and separate from the food zone to
increase food storage capacity. The entire “plug” sys­tem is fully charged with environmentally safe R-134a
refrigerant and mounted on a sturdy steel, rail-type
base which can be easily removed if freezer conver­sion is desired. Refrigerators are designed to maintain
38 to 40 degrees Fahrenheit (3 to 5 degrees
Centigrade) while operating with an unrestricted air
supply in a maximum ambient temperature of 100
degrees Fahrenheit . All condensate water is evapo­rated by an automatic non-electric, corrosion-resistant
condensate evaporator. A strict quality-assurance
team inspects all materials and components to certify
that each model conforms to the most exacting stan­dards. All models are factory performance tested for a
minimum of 16 hours prior to crating.

Cabinet Construction

All materials are of top quality, assembled to conform
with strict quality-assurance requirements. The cabi­net front is constructed of heavy-gauge polished stain­less steel for durability. All cabinet joints and seams
are sealed vapor-tight. Case is of all metal, welded
construction and internally supported and braced for a
rigid unit construction. Cabinet design eliminates over­lapping panels with raw edges. Cabinet body is insu­lated with non-CFC, foamed-in-place polyurethane
foam with an average thickness of 3 inches to ensure
increased energy efficiency. Full length louvered air
grille located above the doors allows equal air circula­tion to the condensing unit. Easily removable, low
wattage, anti-sweat door heaters concealed by a non­metallic, non-conductive, high-impact thermal breaker
strip eliminate condensate build-up on the cabinet
front. Fluorescent lighting is activated by an easily
accessible interior switch. Cabinets are equipped with
6-inch adjustable stainless steel legs.

Shelving

Shelves are designed for heavy-duty use with .306"
diameter frame and brace members and .140" diame­ter fill wires spaced 3/4" apart. Shelves are welded steel
and epoxy-coated for a durable, long, rust-free service
life. Adjustments are in

1

/

2" increments and a wide door

opening allows the use of a variety of optional pan and
tray slide types.

Door Construction

Double-pane tempered glass is encased by a heated,
heavy-duty aluminum extruded frame. Replaceable
snap-in door gaskets are self-adjusting, heavy-duty,
magnetic type. Door handles and hinges are chrome­plated and non-corrosive. Doors are provided with
built-in cylinder locks which are keyed alike. Hinges
are cam-action, lift-off type featuring positive safety
stop at 120 degrees.

DLRGD305

REFRIGERATORS

A Division of National Refrigeration & A/C Products, Inc.
539 Dunksferry Road Bensalem, PA 19020
[phone] Fax: [phone]
www.continentalrefrigerator.com

DL1R-SS-GD DL2R-SS-GD DL3R-SS-GD

Reach-In Pass-Thru Reach-In Pass-Thru Reach-In Pass-Thru

CHARACTERISTICS (Glass One Side) (Glass One Side)

DIMENSIONAL DATA

Net Capacity (cu. ft.) 21 21 50 50 72 72
Width, Overall (in.) 26 26 52 52 78 78
Depth, Overall (Incl. Hdls.) (in.) 351/

2

39 351/

2

39 351/

2

39
Depth (Less Door(s) (in.) 32 32 32 32 32 32
Depth (Doors(s) Open 90°) (in.) 551/2

79 55

1

/2

79 55

1

/2

79
Clear Door Width (in.) 19

3

/

8

193/

8

193/

8

193/

8

193/

8

193/

8

Clear Full-Door Height (in.) 585/

8

585/

8

585/

8

585/

8

585/

8

585/

8

Clear Half-Door Height (in.) 271/

2

271/

2

271/

2

271/

2

271/

2

271/

2

Height, Overall (Inc. 6" Legs)(in.) 831/

4

831/

4

831/

4

831/

4

863/

4

863/

4

Full Door(s) 1 2 2 4 3 6
Half Door(s) 2 4 4 8 6 12
Shelves 4 4 8 8 12 12
Shelf Area (sq. ft.) 23.8 23.8 47.6 47.6 71.4 71.4
Tray Slide Capacity (Half) 12 ea. 12 ea. 12 ea. 12 ea. 12 ea. 12 ea.
Tray Slide Capacity (Full) 24 ea. 24 ea. 24 ea. 24 ea. 24 ea. 24 ea.

REFRIGERATION DATA

Condensing Unit Size (H.P.)

1

/3

1

/3

1

/2

1

/2

3

/4

3

/4

Capacity (BTU/hr)** 2560 2560 4010 4010 5930 5930

ELECTRICAL DATA

Cabinet Specifications

115/60/1 115/60/1 115/60/1 115/60/1 115/208-230/60/1 115/208-230/60/1

Feed Wires (Incl. Ground) 3 3 3 3 4 4
Condensing Unit Specs.

115/60/1 115/60/1 115/60/1 115/60/1 208-230/60/1 208-230/60/1

Total Amperes 10.7 11 13.6 16.0 12.8 15.9
Cabinet Amperes 3.5 3.8 4.1 6.5 5.8 8.9
Defrost Amperes - - - - - ­Power Supply Cord yes yes yes yes no no

SHIPPING DATA

Height – crated (in.) 851/

2

851/

2

851/

2

851/

2

851/

2

851/

2

Width – crated (in.) 315/

8

315/

8

64 64 90 90
Depth – crated (in.) 42 42 42 42 42 42
Volume – crated (cu.ft.) 66 66 133 133 187 187
Weight Std – crated (lbs.) 325 390 545 645 755 930
Weight SS – crated (lbs.) 385 440 675 725 870 1045
Weight Std – uncrated (lbs.) 225 260 375 445 545 650
Weight SS – uncrated (lbs.) 285 370 455 525 660 765

**Rating @ +25°F Evaporator, 90°Ambient
Note: All specifications subject to change without notice.
Note: If the cabinet is located directly against wall and/or under low ceiling, a minimum clearance of 2" is required. Cabinet

upper side panels and refrigeration plug system can be easily removed and reinstalled at installation site where
space limitations are confining.

32"
34"

351/2"

SIDE VIEW

DL1R-SS-GD

FRONT VIEW

831/

4"

26"

6" ADJUSTABLE LEGS

DIGITAL THERMOMETER

DL2R-SS-GD

FRONT VIEW

831/4"

52"

6" ADJUSTABLE LEGS

DIGITAL THERMOMETER

863/4"

78"

6" ADJUSTABLE LEGS

DIGITAL THERMOMETER

DL3R-SS-GD

FRONT VIEW