Continental Refrigerator DL2RSES User Manual
DESIGNER LINE SLIM LINE REFRIGERATOR
Project Name:
Model: DL2RSES
2-Section Slim Line Reach-In
Refrigerator Shallow Depth
DL2RSES - Stainless steel front, aluminum end panels and interior
DL2RSES-SA - Stainless steel exterior, aluminum interior
DL2RSES-SS- Stainless steel exterior and interior
Model Specified:
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Environmentally-safe R-134a refrigerant
Self contained, performance-rated refrigeration system
Automatic, electric condensate evaporator*
CABINET ARCHITECTURE
3” non-CFC polyurethane foam insulation
Chrome-plated flow line handles
Cam action, lift off hinges
Self-closing doors
Magnetic snap-in door gaskets
Cylinder lock in door
Heavy-duty, epoxy-coated steel shelves
Adjustable 6” stainless steel legs
Options and Accessories
(upcharge and lead times may apply)
Stainless steel case back Pass-Thru
Additional epoxy-coated steel shelves Standard depth
Chrome or stainless steel shelves Hinged glass doors
Expansion valve system Increased refrigeration systems
Wine display Special electrical req. (consult factory)
Casters
Dial thermometer • One way security screws
Remote models • Locking hasp (lock not included)
Custom laminates • Stainless steel mesh cover
Half doors • Coverless hinges
Consult factory for other model configurations, options and accessories.
Correctional Facility Options
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
MODEL FEATURES
Automatic interior lighting
External digital thermometer
Energy saving switch for door heaters
Will accommodate 12 x 20 pans
* Coil housing in cabinet zone and automatic, electric condensate in lieu of
hot gas condensate.
APPROVAL:
Model Specifications
DIMENSIONAL DATA
Net Capacity (cu. ft.) 24 (680 cu l)
Width, Overall (in.) 36 1/4 (921 mm)
Depth, Overall (incl. handles) (in.) 29 1/4 (743 mm)
Depth [less doors] (in.) 25 7/8 (657 mm)
Depth [doors open 90°] (in.) 42 3/8 (1076 mm)
Clear Door Width (in.) 12 7/8 (327 mm)
Clear Door Height (in.) 58 5/8 (1489 mm)
Height, Overall (incl. 6” legs) (in.) 83 1/4 (2115 mm)
No. of Doors 2
No. of Shelves 3
Shelf Area (sq. ft.) 24.4 (2.3 sq m)
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1/4
Capacity (BTU/Hr)* 1940
ELECTRICAL DATA
Voltage (int’l) 115/60/1 (220/50/1)
Feed Wires (incl. ground) 3
Total Amps (int’l) 5.7 (3.6)
10 ft. Cord/Plug [attached] (int’l) Yes (No)
SHIPPING DATA
Height - Crated (in.) 85 1/2 (2172 mm)
Width - Crated (in.) 42 (1067 mm)
Depth - Crated (in.) 42 (1067 mm)
Volume - Crated (cu. ft.) 84 (2379 cu l)
Weight Std - Crated (lbs.) 430 (195 kg)
Weight SS - Crated (lbs.) 490 (222 kg)
Weight Std - Uncrated (lbs.) 330 (150 kg)
Weight SS - Uncrated (lbs.) 390 (177 kg)
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
Equipped with one NEMA-5-15P Plug
(varies by country)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2013. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
Model Plan Views
12 7/8”
77 1/4”
(1962 mm)
83 1/4”
(2115 mm)
6”
(152 mm)
FRONT VIEW
SIDE VIEW
IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
clearance of 12” is required.
REFRIGERATION SYSTEM
A “performance rated”, air-cooled, hermetically
sealed, capillary-type refrigeration system is installed on the top of each refrigerator. Plasticized
fin coil and air circulation fans are contained
within an easily accessible, low-profile, interior
ceiling mounted housing. Refrigeration system is
fully charged with environmentally safe R-134a
refrigerant. Refrigerators are designed to maintain
38°F-40°F (3°-5° Centigrade) while operating with
an unrestricted air supply in a maximum ambient
temperature of 100°F. All condensate water is
directed to the cabinet bottom for connection to
an automatic thermostatically-controlled evaporator which is supplied with each model. A strict
quality-assurance team inspects all materials and
components to certify that each model conforms
to the most exacting standards. All models are factory performance tested for a minimum of 16 hours
prior to crating.
INSULATION
All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.
SHELVING
Shelves are designed for heavy-duty use with .306”
diameter frame and brace members and .140” diameter fill wires spaced 3/4” apart. Shelves are
welded steel and epoxy-coated for a durable, long,
rust-free service life. Adjustments are in 1 inch
increments and will accommodate 12 x 20 pans.
(327 mm)
DOOR
OPENING
36 1/4”
(921 mm)
29 1/4”
(743 mm)
25 7/8”
(657 mm)
23 7/8”
(606 mm)
56 5/8”
(1438 mm)
CABINET CONSTRUCTION
All materials are of top quality, assembled to conform with strict quality-assurance requirements.
The cabinet front is constructed of heavy-gauge
polished stainless steel for durability. All cabinet
joints and seams are sealed vapor-tight. Case is of
all metal, welded construction and internally supported and braced for a rigid unit construction.
Cabinet design eliminates overlapping panels with
raw edges. Cabinet body is insulated with nonCFC, foamed-in-place polyurethane foam with an
average thickness of 3 inches to ensure increased
energy efficiency. Full-length louvered air grille
located above the doors allows equal air circulation to the condensing unit. Easily removable, lowwattage, anti-sweat door heaters concealed by a
non-metallic, non-conductive, high-impact thermal
breaker strip eliminates condensate build-up on the
cabinet front. Automatic interior lighting is activated by an easily accessible interior switch. Cabinet is
equipped with 6 inch adjustable stainless steel legs.
DOOR CONSTRUCTION
Solid hinged door shells are constructed of heavygauge stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door corners
are welded construction and polished. Replaceable
snap-in door gaskets are self-adjusting, heavyduty, magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are provided with built-in cylinder lock. Hinges are cam
action, lift-off type featuring positive safety stop at
120 degrees.
58 5/8”
(1489 mm)
DOOR
OPENING
DL2RSES (8/27/13)
Loading...