Continental Refrigerator DL2RI-E User Manual

DESIGNER LINE ROLL-IN REFRIGERATOR

Project Name:

Model: DL2RI-E

2-Section Extra-High Roll-In
Refrigerator with 72” Cart Capacity

Standard - Stainless steel front, aluminum end panels and interior
Suffix SA- Stainless steel exterior, aluminum interior
Suffix SS - Stainless steel exterior and interior

Options and Accessories

(upcharge and lead times may apply)

Stainless steel case back Roll-Thru
Epoxy-coated steel shelves Hinged glass doors
Chrome or stainless steel shelves Increased refrigeration systems
Rehinging of doors (consult factory) Special electrical req. (consult factory)
Expansion valve system
Dial thermometer • One way security screws
Remote models • Locking hasp (lock not included)
Custom laminates • Stainless steel mesh cover
Half doors • Coverless hinges

Consult factory for other model configurations, options and accessories.

Correctional Facility Options

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Environmentally-safe R-134a refrigerant
Self contained, performance-rated

“plug” refrigeration system
Automatic hot gas condensate evaporator
Unique air flow distribution ducts evenly distributes

air to all pan levels
Refrigeration system is accessible on top of cabinet,

separate from the food zone

CABINET ARCHITECTURE

Removable stainless steel rack guides
Removable stainless steel ramps
Reinforced stainless steel floor
3” non-CFC polyurethane foam insulation
Chrome-plated flow line handles
Cam action, lift off hinges
Magnetic snap-in door gaskets
Cylinder lock in door
Self-closing doors
72 1/2” high door openings (72”H rack capacity*)

Standard Finish

Stainless steel front, aluminum end panels and interior

-SA Finish

Stainless steel exterior, aluminum interior

-SS Finish

Stainless steel exterior and interior

MODEL FEATURES

Automatic interior lighting
External digital thermometer
Energy saving switch for door heaters

* Rack not supplied

IMPORTANT NOTE: Cabinet upper side panels and refrigeration “plug”
system can be easily removed and reinstalled at installation site where
space limitations are confining.

APPROVAL:

Model Specifications

35 3/8”

Model Plan Views

DIMENSIONAL DATA

Net Capacity (cu. ft.) 68 (1926 cu l)
Width, Overall (in.) 68 1/2 (1740 mm)
Depth, Overall (incl. handles) (in.) 35 3/8 (899 mm)
Depth [less door] (in.) 32 (813 mm)
Depth [door open 90°] (in.) 65 (1651 mm)
Clear Door Width (in.) 27 3/8 (695 mm)
Clear Full Door Height (in.) 72 1/2 (1842 mm)
Height, Overall (in.) 92 (2337 mm)
No. of Door(s) 2
Rack Capacity** 2 ea.

REFRIGERANT DATA

Condensing Unit Size (H.P.) 3/4
Capacity (BTU/Hr)* 4010

ELECTRICAL DATA

Voltage (int’l)

115/208-230/60/1

(220/50/1)
Feed Wires (incl. ground) 4
Total Amps (int’l) 14.4 (11.2)
10 ft. Cord/Plug [attached] (int’l) No (No)

SHIPPING DATA

Height - Crated (in.) 97 (2464 mm)
Width - Crated (in.) 77 (1956 mm)
Depth - Crated (in.) 42 (1067 mm)
Volume - Crated (cu. ft.) 176 (4984 cu l)
Weight Std - Crated (lbs.) 700 (318 kg)
Weight SS - Crated (lbs.) 740 (336 kg)
Weight Std - Uncrated (lbs.) 560 (254 kg)
Weight SS - Uncrated (lbs.) 595 (270 kg)

* Rating @ +25°F evaporator, 90°F ambient
** Maximum rack size including wheels - 27”W x 29”D x 72”H

Figures in parentheses reflect metric equivalents rounded to the nearest
whole millimeter.

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative
products, specifications subject to change without notice.

®

MADE IN THE U.S.A.

© Copyright 2013. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.

15 1/2”

(394 mm)

92”

(2184 mm)

76 1/2”

(1791 mm)

6”

(152 mm)

68 1/2”

(1740 mm)

(899 mm)

32”

(813 mm)

Cabinet design eliminated overlapping panels with
raw edges. Cabinet body is insulated with non­CFC, foamed-in-place polyurethane foam with an
average thickness of 3 inches to ensure increased
energy efficiency. Full-length louvered air grille
located above the doors allows equal air circula­tion to the condensing unit. Easily removable, low­wattage, anti-sweat door heaters concealed by a
non-metallic, non-conductive, high-impact thermal
breaker strip eliminate condensate build-up on the
cabinet front. Automatic interior lighting is con­trolled by door openings. Cabinets are equipped
with an easily removable, stainless steel ramp and
interior rack guides.

DOOR CONSTRUCTION

Solid hinged door shells are constructed of heavy­gauge stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door corners
are welded construction and polished. Replaceable
snap-in door gaskets are self-adjusting, heavy­duty, magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are pro­vided with built-in cylinder locks which are keyed
alike. Hinges are cam action, lift-off type featuring
positive safety stop at 120 degrees.

DL2RI-E (8/14/13)

FRONT VIEW

SIDE VIEW

IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
clearance of 12” is required.

REFRIGERATION SYSTEM

A “performance rated”, air-cooled, hermetically
sealed, capillary-type refrigeration system is in­stalled on the top of each refrigerator. Plasticized
fin coil and air circulation fans are contained within
a concealed “plug”-type insulated housing, read­ily accessible on top of the cabinet and separate
from the food zone to increase food storage ca­pacity. The entire “plug” system is fully charged
with environmentally safe R-134a refrigerant and
mounted on a sturdy steel, rail-type base which can
be easily removed if freezer conversion is desired.
Refrigerators are designed to maintain 38°F-40°F
(3°-5° Centigrade) while operating with an unre­stricted air supply in a maximum ambient tempera­ture of 100°F. All condensate water is evaporated
by an automatic, non-electric, corrosion-resistant
condensate evaporator. A strict quality-assurance
team inspects all materials and components to cer­tify that each model conforms to the most exacting
standards. All models are factory performance­tested for a minimum of 16 hours prior to crating.

INSULATION

All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.

CABINET CONSTRUCTION

All materials are of top quality, assembled to con­form with strict quality-assurance requirements.
The cabinet front is constructed of heavy-gauge
polished stainless steel for durability. All cabinet
joints and seams are sealed vapor-tight. Case is of
all metal, welded construction and internally sup­ported and braced for a rigid unit construction.