Continental Refrigerator DL1RE-SS, DL1RX-SS, DL2RE-SS, DL3RE-SS Specifications
EXTRA-WIDE
REFRIGERATORS
REFRIGERATORS
Utilizing Environmentally Safe, CFC-free R-134a Refrigerant
Standard Features
• Modern, State-of-the-Art Styling Performance
Rated “Plug” Refrigeration System Utilizing
Environmentally Safe R-134a Refrigerant
• 3" Non-CFC Polyurethane Foam Insulation
• Chrome-Plated Flow Line Handles
• Cam-Action Lift-Off Hinges
• Self-Closing Doors
• Magnetic Snap-In Door Gaskets
• Cylinder Lock in Each Door
• Automatic Hot Gas Condensate Evaporator
• Adjustable 6" Stainless Steel Legs
• Heavy-Duty,Epoxy-Coated Steel Shelves
• External Digital Thermometer
Models Available
• DL1RE
• DL1RX
• DL2RE
• DL3RE
Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)
DDLL11RREE--SSSS
OOtthheerr MMooddeellss AAvvaaiillaabbllee
•• DDLL11RRXX--SSSS
DDLL22RREE--SSSS
DDLL33RREE--SSSS
Refrigeration System
A “performance rated” air cooled hermetically
sealed, capillary-type refrigeration system is
installed on the top of each refrigerator. Plasticized
fin coil and air circulating fans are contained within
a concealed “plug”-type insulated housing,readily
accessible on top of the cabinet and separate from
the food zone to increase food storage
capacity.The entire “plug” system is fully charged
with environmentally safe R-134a refrigerant and
mounted on a sturdy steel, rail-type base which can
be easily removed if freezer conversion is desired.
Refrigerators are designed to maintain 38 to 40
degrees Fahrenheit (3 to 5 degrees Centigrade)
while operating with an unrestricted air supply in a
maximum ambient temperature of 100 degrees
Fahrenheit. All condensate water is evaporated by
an automatic non-electric, corrosion-resistant condensate evaporator. A strict quality- assurance
team inspects all materials and components to certify that each model conforms to the most exacting
standards. All models are factory performance-tested for a minimum of 16 hours prior to crating.
Cabinet Construction
All materials are of top quality, assembled to conform with strict quality-assurance requirements.
The cabinet front and doors are constructed of
heavy-gauge polished stainless steel for durability.
All cabinet joints and seams are sealed vapor-tight.
Case is of all metal, welded construction and internally supported and braced for a rigid unit construction. Cabinet design eliminates overlapping
panels with raw edges. Cabinet body and doors are
insulated with non-CFC, foamed-in-place
polyurethane foam with an average thickness of 3
inches to ensure increased energy efficiency. Full
length louvered air grille located above the doors
allows equal air circulation to the condensing unit.
Easily removable, low wattage, anti-sweat door
heaters concealed by a non-metallic, non-conductive, high impact thermal stainless steel breaker
strip and cover eliminate condensate build-up on
the cabinet front. Automatic interior lighting is controlled by door openings. Cabinets are equipped
with 6-inch adjustable stainless steel legs.
Shelving
Shelves are designed for heavy-duty use with .306"
diameter frame and brace members and .140"
diameter fill wires spaced 3/4" apart. Shelves are
welded steel and epoxy-coated for a durable, long,
rust-free service life, mounted on studs. A wide
door opening allows the use of a variety of optional pan and tray slide types.
Door Construction
Door shells are constructed of heavy-gauge stainless steel and are internally braced and urethanefoam-insulated for rigidity. Door corners are of
welded construction and polished. Replaceable
snap-in door gaskets are self-adjusting, heavyduty, magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are provided with built-in cylinder locks which are keyed
alike. Hinges are cam-action, lift-off type featuring
positive safety stop at 120 degrees.
DLREF305
RREEFFRRIIGGEERRAATTOORRSS
A Division of National Refrigeration & A/C Products, Inc.
539 Dunksferry Road Bensalem, PA 19020
(800) 523-7138 Fax: (215) 244-9579
www.continentalrefrigerator.com
DL1RE-SS DL1RX-SS DL2RE-SS DL3RE-SS
One Section One Section-Extrawide Two Section Three Section
CHARACTERISTICS Reach-In Pass-Thru Reach-In Pass-Thru Reach-In Pass-Thru Reach-In Pass-Thru
DIMENSIONAL DATA
Net Capacity (cu. ft.) 22 22 32 32 52 52 75 75
Width, Overall (in.) 281/
2
281/
2
361/
4
361/
4
57 57 851/
2
851/
2
Depth, Overall Incl. Hdls. (in.) 351/
2
39 351/
2
39 351/
2
39 351/
2
39
Depth (Less Door(s) (in.) 32 32 32 32 32 32 32 32
Depth (Doors(s) Open 90°) (in.) 58 84 66 100 58 84 58 84
Clear Door Width (in.) 217/
8
217/
8
295/
8
295/
8
217/
8
217/
8
217/
8
217/
8
Clear Full-Door Height (in.) 585/
8
585/
8
585/
8
585/
8
585/
8
585/
8
585/
8
585/
8
Clear Half-Door Height (in.) 271/
2
271/
2
271/
2
271/
2
271/
2
271/
2
271/
2
271/
2
Height, Overall (Incl. 6" Legs)(in.) 831/
4
831/
4
831/
4
831/
4
831/
4
831/
4
831/
4
831/
4
Full Door(s) 1 2 1 2 2 4 3 6
Half Door(s) 2 4 2 4 4 8 6 12
Shelves 3 3 3 3 6 6 9 9
Shelf Area (sq. ft.) 20.4 20.4 24.4 24.4 40.8 40.8 61.2 61.2
Tray Slide Capacity (Half) 12 ea. 12 ea. 12 ea. 12 ea. 12 ea. 12 ea. 12 ea. 12 ea.
Tray Slide Capacity (Full) 25 ea. 25 ea. 25 ea. 25 ea. 25 ea. 25 ea. 25 ea. 25 ea.
REFRIGERATION DATA
Condensing Unit Size (H.P.)
1
/
4
1
/
4
1
/
4
1
/
4
1
/
3
1
/
3
1
/
2
1
/
2
Capacity (BTU/Hr)** 1940 1940 2190 2190 2560 2560 4010 4010
ELECTRICAL DATA
Cabinet Specifications
115/60/1 115/60/1 115/60/1 115/60/1 115/60/11 115/60/1 115/60/1 115/60/1
Feed Wires (Incl. Ground) 3 3 3 3 3 3 3 3
Condensing Unit Specs.
115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Total Amperes 6.9 7.2 7.1 7.4 9.1 9.8 12.4 13.4
Cabinet Amperes 1.6 1.9 1.8 2.1 1.9 2.6 2.9 3.9
Defrost Amperes - - - - - - - Power Supply Cord yes yes yes yes yes yes yes yes
SHIPPING DATA
Height – crated (in.) 851/
2
851/
2
851/
2
851/
2
851/
2
851/
2
851/
2
851/
2
Width – crated (in.) 315/
8
315/
8
42 42 64 64 90 90
Depth – crated (in.) 42 42 42 42 42 42 42 42
Volume – crated (cu.ft.) 66 66 87 87 133 133 187 187
Weight Std – crated (lbs.) 340 370 440 445 575 645 795 795
Weight SS – crated (lbs.) 420 430 500 505 655 715 915 1005
Weight Std – uncrated (lbs.) 240 270 340 345 405 465 590 660
Weight SS – uncrated (lbs.) 300 330 400 405 485 545 715 795
**Rating @ +25°F Evaporator, 90° Ambient
Note: All specifications subject to change without notice.
Note: If the cabinet is located directly against wall and/or under low ceiling, a minimum clearance of 2" is required.
Cabinet upper side panels and refrigeration plug system can be easily removed and reinstalled at installation site where space limitations are confining.
SIDE VIEW DL1RE-SS
FRONT VIEW
DL1RX-SS
FRONT VIEW
DL2RE-SS
FRONT VIEW
DL3RE-SS
FRONT VIEW
351/2"
831/4"
281/2"
361/4"
831/4"
83
1
/4"
83
1
/4"
57"
34"
32"
6” Adjustable
Legs
6” Adjustable
Legs
Loading...