Continental Refrigerator DL1FE-SS-GD, DL2FE-SS-GD, DL3FE-SS-GD, DL1FX-SS-GD Characteristics

EXTRA-WIDE DISPLAY

FREEZERS

FREEZERS

Utilizing Environmentally Safe, CFC-free R-404a Refrigerant

Standard Features

• Modern, State-of-the-Art Styling Performance rated
“Plug” Refrigeration System Utilizing Environmentally
Safe R-404a Refrigerant Designed for (0° F) Cabinet

• 3" Non-CFC Polyurethane Foam Insulation

• Cam-Action Lift-Off Hinges

• Self-Closing Doors

• Magnetic Snap-In Door Gaskets

• Cabinet Upper Side Panels and Refrigeration “Plug”
System can be Easily Removed and Reinstalled at
Job-Site Where Space Limitations are Confining

• Cylinder Lock in Each Door

• Automatic Hot Gas Condensate Evaporator

• Refrigeration System is Readily Accessible on Top
of the Cabinet and Separate from the Food Zone
to Increase Food Storage Capacity

• Adjustable 6" Stainless Steel Legs

• Heavy-Duty, Epoxy-Coated Steel Shelves

• External Digital Thermometer

• Automatic Electric Defrost

• Triple-pane, Tempered Hinged Glass Doors

• Fluorescent Interior Lighting

Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)

DL1FE-SS-GD

DL2FE-SS-GD

DL3FE-SS-GD

Other Models Available

• DL1RX-SS-GD

• Half Door

• Remote

• Pass-Thru

• Consult Factory

Optinonal Features & Accessories

Refrigeration System

A “performance rated”, air cooled, hermetically
sealed, capillary-type refrigeration system is installed
on the top of each refrigerator. Plasticized fin coil and
air circulating fans are contained within a concealed
“plug” type insulated housing, readily accessible on
top of the cabinet and separate from the food zone to
increase food storage capacity. The entire “plug” sys­tem is fully charged with refrigerant and mounted on
a sturdy steel, rail-type base which can be easily
removed if freezer conversion is desired. Freezers
are designed to maintain 0 degrees Fahrenheit (-18
Centigrade) while operating with an unrestricted air
supply in a maximum ambient temperature of 100
degrees Fahrenheit . All condensate water is evapo­rated by an automatic non-electric, corrosion-resist­ant condensate evaporator. A strict quality-assurance
team inspects all materials and components to certify
that each model conforms to the most exacting stan­dards. All models are factory performance tested for a
minimum of 16 hours prior to crating.

Cabinet Construction

All materials are of top quality, assembled to conform
with strict quality-assurance requirements. The cabi­net front is constructed of heavy-gauge polished
stainless steel for durability. All cabinet joints and
seams are sealed vapor-tight. Case is of all metal,
welded construction and internally supported and
braced for a rigid unit construction. Cabinet design
eliminates overlapping panels with raw edges.
Cabinet body is insulated with non-CFC, foamed-in­place polyurethane foam with an average thickness of
3 inches to ensure increased energy efficiency. Full
length louvered air grille located above the doors
allows equal air circulation to the condensing unit.
Easily removable, low wattage, anti-sweat door
heaters concealed by a non-metallic, non-conductive,
high-impact thermal breaker strip eliminate conden­sate build-up on the cabinet front. Fluorescent lighting
is activated by an easily accessible interior switch.
Cabinets are equipped with 6-inch adjustable stain­less steel legs.

Shelving

Shelves are designed for heavy-duty use with .306"
diameter frame and brace members and .140" diam­eter fill wires spaced

3

/4" apart. Shelves are welded
steel and epoxy-coated for a durable, long, rust-free
service life. Adjustments are in 1/2 inch increments
and a wide door opening allows the use of a variety of
optional pan and tray slide types.

Door Construction

Triple-pane tempered glass is encased by a heated,
heavy-duty aluminum extruded frame. Replaceable
snap-in door gaskets are self-adjusting, heavy-duty,
magnetic type. Door handles and hinges are chrome­plated and non-corrosive. Doors are provided with
built-in cylinder locks which are keyed alike. Hinges
are cam-action, lift-off type featuring positive safety
stop at 120 degrees.

DLFEGD305

FREEZERS

A Division of National Refrigeration & A/C Products, Inc.
539 Dunksferry Road Bensalem, PA 19020
[phone] Fax: [phone]
www.continentalrefrigerator.com

MODEL MODEL MODEL MODEL

DL1FE-SS-GD DL1FX-SS-GD DL2FE-SS-GD DL3FE-SS-GD

CHARACTERISTICS Reach-In Reach-In Pass-Thru Reach-In Pass-Thru Reach-In Pass-Thru
DIMENSIONAL DATA

Net Capacity (cu. ft.) 22 32 32 52 52 75 75
Width, Overall (in.) 281/

2

361/

4

361/

4

57 57 851/

2

851/

2

Depth, Overall (Incl. Hdls.) (in.) 351/

2

351/

2

39 351/

2

39 351/

2

39
Depth (Less Door(s) (in.) 32 32 32 32 32 32 32
Depth (Doors(s) Open 90°) (in.) 58 66 100 58 84 58 84
Clear Door Width (in.) 217/

8

295/

8

295/

8

217/

8

217/

8

217/

8

217/

8

Clear Full-Door Height (in.) 585/

8

585/

8

585/

8

585/

8

585/

8

585/

8

585/

8

Clear Half-Door Height (in.) 271/

2

271/

2

271/

2

271/

2

271/

2

271/

2

271/

2

Height, Overall (Inc. 6" Legs)(in.) 831/

4

881/

4

881/

4

881/

4

881/

4

881/

4

881/

4

Full Door(s) 1 1 2 2 4 3 6
Half Door(s) 2 2 4 4 8 6 12
Shelves 4 4 4 8 8 12 12
Shelf Area (sq. ft.) 20.4 24.4 24.4 47.6 47.6 71.4 71.4
Tray Slide Capacity (Half) 12 ea. 12 ea. 12 ea. 12 ea. 12 ea. 12 ea. 12 ea.
Tray Slide Capacity (Full) 24 ea. 24 ea. 24 ea. 24 ea. 24 ea. 24 ea. 24 ea.

REFRIGERATION DATA

Condensing Unit Size (H.P.)

1

/2

3

/4

3

/4 11 2 2

Capacity (BTU/hr)** 2470 3575 3575 4325 4325 6050 6050

ELECTRICAL DATA

Cabinet Specifications

115/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1

Feed Wires (Incl. Ground) 3 4 4 4 4 4 4
Condensing Unit Specs.

115/60/1 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1 208-230/60/1

Total Amperes 11.4 12.2 12.9 14.0 14.7 22.5 23.5
Cabinet Amperes 3.5 3.0 3.7 4.8 5.5 6.1 7.1
Defrost Amperes 5.2 9.6 9.6 9.6 9.6 9.6 9.6
Power Supply Cord yes no no no no no no

SHIPPING DATA

Height – crated (in.) 851/

2

851/

2

851/

2

851/

2

851/

2

851/

2

851/

2

Width – crated (in.) 315/

8

42 42 64 64 90 90
Depth – crated (in.) 42 42 42 42 42 42 42
Volume – crated (cu.ft.) 63 87 87 133 133 187 187
Weight Std – crated (lbs.) 355 455 460 580 730 820 970
Weight SS – crated (lbs.) 415 515 520 660 810 935 1085
Weight Std – uncrated (lbs.) 255 355 360 475 540 620 730
Weight SS – uncrated (lbs.) 315 415 420 500 620 735 845

**Rating @ -15°F Evaporator, 90°Ambient
Note: All specifications subject to change without notice.
Note: If the cabinet is located directly against wall and/or under low ceiling, a minimum clearance of 2" is required.
Cabinet upper side panels and refrigeration plug system can be easily removed and reinstalled at installation site where space limitations are confining.

SIDE VIEW

DL1RE-SS-GD

FRONT VIEW

DL1RX-SS-GD

FRONT VIEW

DL2RE-SS-GD

FRONT VIEW

DL3RE-SS-GD

FRONT VIEW

32"

34"

351/2"

831/

4"

281/2"

831/4"

36

1

/4"

831/4"

863/4"

85

1

/2"

57"

6" Adjustable
Legs

6" Adjustable Legs

DIGITAL THERMOMETER

6" Adjustable Legs

6" Adjustable Legs

DIGITAL THERMOMETER

DIGITAL THERMOMETER