Continental Refrigerator DL27-8-FB-D User Manual

DESIGNER LINE SANDWICH UNIT
Project Name:
Model: DL27-8-FB-D
27” Standard Top Sandwich Unit Refrigerator with Drawers - 8 Pans Front Breathing
Stainless steel exterior and interior.
Certified under NSF-7 to maintain temperatures in 86°F ambient and designed to maintain NSF-7 temperatures in 100°F ambient.
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Performance-rated refrigeration system Environmentally-safe R-134a refrigerant Unique air flow distribution allows
pan product to maintain 33° - 41°F Automatic, energy saving, non-electric
condensate evaporator Non-corrosive, plasticized fin evaporator coil Easily serviceable, back mounted compressor
Options and Accessories
(upcharge and lead times may apply)
Stainless steel finished back in lieu of aluminum Flat insulated night cover Overshelves (single or double) Remote models Solid door in lieu of drawers Drawer locks Automatic, electric condensate evaporator Crumb catcher Modified pan openings Top extensions Expansion valve system Digital thermometer Rear-mounted cutting board Three tier drawers
Consult factory for other model configurations, options and accessories.
CABINET ARCHITECTURE
2” non-CFC polyurethane foam insulation Magnetic snap-in drawer gaskets 12” deep, full length nylon cutting board Stainless steel roll-out drawers
Insulated lid 3 5/8” casters Completely enclosed, vented and removable case back
MODEL FEATURES
(8) 1/6 size non-recessed pans, 4” deep Interior hanging thermometer
Front breathers are a unique, field assembled, bottom mounted ventilation system designed to allow cabinets to be flush against a wall or built into a counter to conserve space.
Toll-Free: 800-523-7138
Phone: 215-244-1400 Fax: 215-244-9579
539 Dunksferry Road Bensalem, PA 19020
www.continentalrefrigerator.com
APPROVAL:
Model Specifications
Model Plan Views
DIMENSIONAL DATA
Net Capacity (cu. ft.) 7.4 (210 cu l) 1/6 Size Pans (4” deep) 8 Width, Overall (in.) 27 1/2 (699 mm) Depth, Overall (in.)
(incl. handles & bumpers) Depth, Body Only
(less drawers) (in.)
31 (787 mm)
27 1/2 (699 mm)
Depth, Cutting Board (in.) 12 (305 mm) Height, Overall (in.)
(incl. 5” casters)
40 7/8 (1038 mm)
No. of Drawers (two tier) 2 No. of Drawers (three tier) 3
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1/5 Capacity (BTU/Hr)* 1620
ELECTRICAL DATA
Voltage (int’l) 115/60/1 (220/50/1) Fans 2 Total Amps (int’l) 6.3 (3.7) 10 ft. Cord/Plug [attached] (int’l) Yes (No)
SHIPPING DATA
Weight (lbs.) 180 (82 kg) Height - Crated (in.) 43 1/4 (1099 mm) Width - Crated (in.) 35 3/4 (908 mm) Depth - Crated (in.) 46 (1168 mm)
DRAWER PAN CONFIGURATIONS
Two Tier: (1) 12 x 20 x 6 pan per drawer Three Tier: (1) 12 x 20 x 4 pan per drawer
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest whole unit.
FRONT VIEW
(1141 mm)
SIDE VIEW
44 29/32”
11”
(279 mm)
30”
(762 mm)
27 1/2”
(699 mm)
31 7/16”
(799 mm)
27 1/2”
(699 mm)
1”
(25 mm)
40 7/8”
(1038 mm)
30 1/4”
(768 mm)
3 5/8” (92 mm)
12”
(305 mm)
Equipped with one NEMA-5-15P Plug
(varies by country)
Toll-Free: 800-523-7138
Phone: 215-244-1400 Fax: 215-244-9579
539 Dunksferry Road Bensalem, PA 19020
www.continentalrefrigerator.com
Due to our continued efforts in developing innovative products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2015. Continental Refrigerator. A Division of National Refrigeration & Air Conditioning Products, Inc.
27 1/2”
PAN TOP CONFIGURATION
Note: Shown with two tier drawers, see Standard Design Features for drawer pan configurations.
REFRIGERATION SYSTEM
Self-contained refrigeration system is rear mounted, concealed behind a removable louvered cover. Full-length front air grille allows for even air circu­lation to condensing unit. A “performance rated”, air-cooled, hermetically sealed, capillary type re­frigeration system is installed in model. Plasticized finned coil and air circulating fans are contained within an easily accessible rear mounted housing. Unique airflow design allows the cabinet to be enclosed on both sides or mounted flush against a wall. Refrigeration system, fully charged with R­134a refrigerant, is designed to maintain 38°-41°F while operating with an unrestricted air supply in an ambient temperature of 100°F. All condensate water is directed to a non-electric condensate va­porizer located in the compressor compartment, no plumbing is required. A strict quality assurance team inspects all materials and components to cer­tify the model conforms to the most exacting stan­dards. Model is performance tested for a minimum of 16 hours prior to crating.
INSULATION
All cabinet walls, top and bottom have high density, foamed-in-place, non-CFC polyurethane insulation.
(699 mm)
CABINET CONSTRUCTION
Materials are top quality, assembled under rigid supervision conforming to strict quality assurance requirements. Case is welded metal construction, internally supported and braced for rigid unit construction. Exterior, interior and worktop are heavy gauge polished stainless steel. Design eliminates overlapping panels with raw edges. Interior corners are rounded with 1/4” radius. Joints and seams are vapor-tight sealed. Easily removable anti-sweat door heaters, concealed by non-metallic, non-conductive, high impact thermal breaker strips, eliminates condensation build-up on case front.
DRAWER CONSTRUCTION
Fronts/backs are constructed of heavy-gauge, pol­ished stainless steel with heavy-duty, safety grip, chrome plated handles. Drawer fronts are insulated with non-CFC polyurethane foam insulation. Full extension, lift-out frames are heavy gauge, welded stainless steel mounted on heavy-duty, easy glide, self closing slides. Self adjusting, full perimeter, magnetic snap-in gaskets guarantee a positive seal.
DL27-8-FB-D (6/4/15)
Loading...