Continental Refrigerator DL27-8C User Manual

REFRIGERATORS

SANDWICH UNIT

REFRIGERATOR
w/CUTTING TOP

Utilizing Environmentally Safe, CFC-free R-134a Refrigerant

DL48-12C

Models Available

• DL27-8C • DL48-8C • DL48-10C

• DL48-12C • DL60-8C • DL60-12C

• DL60-16C • DL72-12C • DL72-18C

• DL72-18C

Optional Features & Accessories

•Remote Models - R

•Electric Condensate

•Additional Shelves

•Door Locks

REFRIGERATION SYSTEM

The self-contained refrigeration system is rear mounted,
concealed behind a removable louvered cover. Full­length front air grille allows for even air circulation to
condensing unit. A "Performance Rated", air-cooled,
hermetically sealed, capillary type refrigeration system
is installed in each model. Plasticized finned coil and air
circulating fans are contained within an easily accessi­ble rear mounted housing. Our unique airflow design
allows the cabinet to be enclosed on both sides or to be
mounted flush against a wall. Our refrigeration system,
fully charged with R-134a refrigerant, is designed to
maintain 38° - 40° Fahrenheit while operating with an
unrestricted air supply in an ambient temperature of
100° Fahrenheit. All condensate water is directed to a
non-electric condensate vaporizer located in the com­pressor compartment, thus no plumbing is required. A
strict quality assurance team inspects all materials and
components to certify that each model conforms to the
most exacting standards. All models are performance
tested for a minimum of 16 hours prior to crating.

•Single Overshelf

•Double Overshelf

•Pan Opening Sizes

CABINET CONSTRUCTION

All materials are of top quality and are assembled
under rigid supervision conforming to strict quality
assurance requirements. Case is of all metal weld­ed construction and is internally supported and
braced for rigid unit construction. Exterior cabinet
back and bottom are heavy gauge galvanized steel.
Worktop is constructed of heavy gauge polished
stainless steel for durability.

Cabinet design eliminates overlapping panels with
raw edges. Interior corners are rounded with a ¼"
radius for cleaning ease. All cabinet joints and
seams are vapor-tight sealed. An easily removable
anti-sweat door heater, concealed by a non-metallic,
non-conductive, high impact thermal breaker strip,
eliminates condensation build-up on case front.

INSULATION

All cabinet walls, top, and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.

Standard Features

•Unique Field Assembled, Bottom Mounted Ventilation
System Designed To Allow Cabinets To Be Flush Against
A Wall Or Built Into A Counter To Conserve Space

•19" Deep, Full Length Nylon Cutting Board

•Unique Air Flow Distribution Allows Pan Product To

Maintain 33°-41°F Being In Compliance With and
Certified Under The New ‘98 NSF Standard For
Preparation Units

•Modern, State-of-the Art Styling

•Performance Rated Refrigeration System Utilizing
Environmentally Safe R-134a Refrigerant

•Easily Serviceable Back Mounted Compressor

•2" Non-CFC Polyurethane Foam Insulation

•Spring Loaded, Self Closing Door

•Magnetic Snap-In Gasket

•Adjustable 6" Stainless Steel Legs

•Heavy-Duty, Epoxy-Coated Steel Shelves

•Cabinet Construction Consisting of Stainless Steel

Exterior and Interior

•Completely Enclosed, Vented & Removable Case Back

•Automatic, Energy Saving, Non-Electric Condensate

Disposal

•1/6 Size Pans, 4" Deep

•10 ft Cord and Plug Attached

SHELVING

Shelves are designed for heavy-duty use
with .306" diameter frame and brace mem­bers and .140" diameter fill wires spaced ¾"
apart. Shelves are welded steel and epoxy­coated for a durable, long, rust-free service
life.

DOOR CONSTRUCTION

Door shells are constructed of heavy-gauge
stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door
corners are of welded construction and pol­ished. Replaceable snap-in door gaskets
are self adjusting, heavy-duty, magnetic
type. Door handles and hinges are chrome­plated and non-corrosive. Hinges are
spring loaded, heavy duty, self-closing.

REFRIGERATORS

MODEL CU.FT. 1/6 EXT.DIM. DEPTH SHELF SHELVES DOORS HP VOLTS AMPS FANS SHIP

(4" Deep) (lbs)

DL27-8C 7.4 8 271/2x35x43 19 3.5 1 1 1/5 115 6.0 2 180
DL48-8C 13.4 8 48x35x43 19 6.8 2 2 1/5 115 6.9 3 270
DL48-10C 13.4 10 48x35x43 19 6.8 2 2 1/5 115 6.9 3 270
DL48-12C 13.4 12 48x35x43 19 6.8 2 2 1/5 115 6.9 3 315
DL60-8C 17.0 8 60x35x43 19 8.1 2 2 1/4 115 7.8 3 315
DL60-12C 17.0 12 60x35x43 19 8.1 2 2 1/4 115 7.8 3 315
DL60-16C 17.0 16 60x35x43 19 8.1 2 2 1/4 115 7.8 3 315
DL72-12C 20.6 12 72x35x43 19 10.2 3 3 1/4 115 8.7 4 398
DL72-18C 20.6 18 72x35x43 19 10.2 3 3 1/4 115 8.7 4 398

DL27-8C

FRONT

VIEW

DL48-_C FRONT VIEW

DL60-_C FRONT VIEW DL72-_C FRONT VIEW

THGWAERA)DRB tuC()HxDxW(snaP

SIDE

VIEW

DL60-8C

A Division of National Refrigeration & A/C Products, Inc.
539 Dunksferry Road Bensalem, PA 19020
[phone] Fax: [phone]
www.continentalrefrigerator.com

DL27-8C

DL60-12C

DL48-8C DL48-10C

DL60-16C

DL48-12C

DL72-12C

DL72-18C

DLC05/13