Continental Refrigerator DL1WI-SS User Manual
ROLL-IN & ROLL-THRU
WARMERS
90° TO 180° RANGE
WARMERS
Standard Features
• Modern, State-of-the-Art Styling
• Top Mounted Heating Plenum “Plug” Design with
Circulating Fans for Uniform Temperature
Distribution
• Humidity Relief Vent
•27
3
/8" Wide, 661/2" High Door Openings
• 3" Non-CFC Polyurethane Foam Insulation
• Cam-Action Lift-Off Hinges
• Self-Closing Doors
• Automatic Interior Lighting
• Cylinder Lock In Each Door
• Exterior Thermostat Control with master
On/Off Control Switch
• Removable Stainless Steel Ramps
• Magnetic Snap-In Door Gasket
• Exterior Digital Thermometer
• Removable Stainless Steel Rack Guides
Models Available
•Roll-Thru •Consult Factory
Standard (S/S Front, Aluminum Ends & Interior)
Suffix SA (S/S Exterior, Aluminum Interior)
Suffix SS (S/S Exterior & Interior)
DDLL11WWII--SSSS
DDLL22WWII--SSSS
DDLL33WWII--SSSS
Heating System-(Range 90°F to 180°F)
Electrically operated heating system is controlled by means of a highly sensitive calibrated thermostat mounted on the cabinet front.
Fin strip heating elements are located at the
base of the interior. Air circulating blower
located in a top mounted, concealed “plug”
housing distributes heat throughout product
zone, assuring uniform cabinet temperatures.
Cabinet top has a built-in humidity relief vent.
The entire “plug” system is mounted on a sturdy steel, rail-type base which can be easily
removed if refrigerator or freezer conversion is
desired. A strict quality assurance team
inspects all material and components to certify that each model conforms to the most
exacting standards. All models are factory
performance tested for a minimum of 16 hours
prior to crating.
Cabinet Construction
All materials are of top quality, assembled to
conform with strict quality-assurance requirements. The cabinet front and doors are constructed of heavy-gauge polished stainless
steel for durability. All cabinet joints and
seams are sealed vapor-tight. Case is of all
metal, welded construction and internally supported and braced for a rigid unit construction.
Cabinet design eliminates overlapping panels
with raw edges. Cabinet body and doors are
insulated with non-CFC, foamed-in-place
polyurethane foam with an average thickness
of 3 inches to ensure increased energy efficiency. Automatic interior lighting is controlled
by door openings. Cabinets are equipped with
an easily removable, stainless steel ramp and
interior rack guides.
Door Construction
Door shells are constructed of heavy-gauge
stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door corners are of welded construction and polished.
Door gaskets are self-adjusting, heavy-duty,
magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are
provided with built-in cylinder locks which are
keyed alike. Hinges are cam action, lift-off
type featuring positive safety stop at 120
degrees.
DLWI305
WARMERS
A Division of National Refrigeration & A/C Products, Inc.
539 Dunksferry Road Bensalem, PA 19020
(800) 523-7138 Fax: (215) 244-9579
www.continentalrefrigerator.com
DL1WI-SS DL2WI-SS DL3WI-SS
One Section Two Section Three Section
CHARACTERISTICS
Roll-In Roll-Thru Roll-In Roll-Thru Roll-In Roll-Thru
DIMENSIONAL DATA
Net Capacity (cu. ft.) 32 32 64 64 96 96
Width, Overall (in.) 35
1
/
4
351/
4
681/
2
681/
2
1013/
4
1013/
4
Depth, Overall (Incl. Hdls.) (in.) 351/2 39 351/2 39 351/
2
39
Depth (Less Door(s)) (in.) 32 32 32 32 32 32
Depth (Doors(s) Open 90°) (in.) 65 98 65 98 65 98
Clear Door Width (in.) 27
3
/
8
273/
8
273/
8
273/
8
273/
8
273/
8
Clear Full-Door Height (in.) 661/
2
661/
2
661/
2
661/
2
661/
2
661/
2
Height, Overall (in.) 86 86 86 86 86 86
No. of Full Door(s) 1 2 2 4 3 6
Rack Capacity* 1 1 2 2 3 3
ELECTRICAL DATA
Cabinet Specifications
115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1 115/208-230/60/1
Feed Wires (Incl. Ground) 4 4 4 4 4 4
Total Amperes 7.8 7.8 14.5 14.5 22.4 22.4
Total Wattage @ 208-230 Volts 1500 1500 3000 3000 4500 4500
Power Supply Cord no no no no no no
SHIPPING DATA
Height – crated (in.) 90 90 90 90 90 90
Width – crated (in.) 43 43 77 77 109 109
Depth – crated (in.) 42 42 42 42 42 42
Volume – crated (cu.ft.) 94 94 168 168 238 238
Weight Std – crated (lbs.) 415 475 680 780 840 960
Weight SS – crated (lbs.) 505 580 720 825 925 1050
Weight Std – uncrated (lbs.) 330 380 540 625 670 760
Weight SS – uncrated (lbs.) 405 460 575 660 740 840
* Maximum Rack Size Including Wheels – 27" Wide x 29" Deep x 66
1
/4
" High
Note: All specifications subject to change without notice.
DL1WI-SS
FRONT VIEW
SIDE VIEW
DL2WI-SS
FRONT VIEW
DL3WI-SS
FRONT VIEW
Loading...