Continental Refrigerator DL1WI-RT User Manual
DESIGNER LINE ROLL-THRU WARMER
Project Name:
Model: DL1WI-RT
1-Section Roll-Thru Warmer
with 66¼” Cart Capacity
Standard - Stainless steel front, aluminum end panels and interior
Suffix SA- Stainless steel exterior, aluminum interior
Suffix SS - Stainless steel exterior and interior
Options and Accessories
(upcharge and lead times may apply)
Stainless steel case back Special electrical req. (consult factory)
Chrome or stainless steel shelves
Rehinging of doors (consult factory) • One way security screws
Custom laminates • Locking hasp (lock not included)
Half doors • Stainless steel mesh cover
Roll-In • Coverless hinges
Hinged glass doors
Consult factory for other model configurations, options and accessories.
Correctional Facility Options
Model Specified:
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
HEATING SYSTEM
Self-contained, performance-rated “plug” warming system
90°F - 180°F temperature range
Humidity relief vent with master on/off control switch
Unique air flow distribution ducts
Heating system is accessible on top of cabinet,
separate from the food zone
CABINET ARCHITECTURE
Removable stainless steel rack guides
Removable stainless steel ramps
Reinforced stainless steel floor
3” non-CFC polyurethane foam insulation
Chrome-plated flow line handles
Cam action, lift off hinges
Magnetic snap-in door gaskets
Cylinder lock in door
Self-closing doors
66 1/2” high door openings (66 1/4”H rack capacity*)
Standard Finish
Stainless steel front, aluminum end panels and interior
-SA Finish
Stainless steel exterior, aluminum interior
-SS Finish
Stainless steel exterior and interior
MODEL FEATURES
External thermostat control
External digital thermometer
* Racks not supplied
IMPORTANT NOTE: Cabinet upper side panels and heating “plug” system
can be easily removed and reinstalled at installation site where space
limitations are confining.
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
APPROVAL:
Model Specifications
DIMENSIONAL DATA
Net Capacity (cu. ft.) 32 (906 cu l)
Width, Overall (in.) 35 1/4 (895 mm)
Depth, Overall (incl. handles) (in.) 38 3/4 (984 mm)
Depth [less doors] (in.) 32 (813 mm)
Depth [doors open 90°] (in.) 98 (2489 mm)
Clear Door Width (in.) 27 3/8 (695 mm)
Clear Full Door Height (in.) 66 1/2 (1676 mm)
Height, Overall (in.) 86 (2184 mm)
No. of Door(s) 2
Rack Capacity** 1 ea.
ELECTRICAL DATA
Voltage (int’l)
Total Wattage @ 208-230 Volts 1500
Feed Wires (incl. ground) 4
Total Amps (int’l) 7.9 (7.2)
10 ft. Cord/Plug [attached] (int’l) No (No)
SHIPPING DATA
Height - Crated (in.) 90 (2286 mm)
Width - Crated (in.) 43 (1092 mm)
Depth - Crated (in.) 42 (1067 mm)
Volume - Crated (cu. ft.) 94 (2661 cu l)
Weight Std - Crated (lbs.) 475 (215 kg)
Weight SS - Crated (lbs.) 580 (263 kg)
Weight Std - Uncrated (lbs.) 380 (172 kg)
Weight SS - Uncrated (lbs.) 460 (209 kg)
** Maximum rack size including wheels - 27”W x 29”D x 66 1/4”H
Figures in parentheses reflect metric equivalents rounded to the nearest
whole millimeter.
115/208-230/60/1
(220/50/1)
Model Plan Views
35 1/4”
(895 mm)
15 1/2”
(394 mm)
86”
(2337 mm)
70 1/2”
(1943 mm)
FRONT VIEW
38 3/4”
(984 mm)
SIDE VIEW
IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
clearance of 12” is required.
6”
(152 mm)
32”
(813 mm)
6”
(152 mm)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2013. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
HEATING SYSTEM (Range 90°F - 180°F)
Electrically operated heating system is controlled
by means of a highly sensitive calibrated thermostat mounted on the cabinet front. Fin strip heating
elements are located at the base of the interior. Air
circulating blower located in a top mounted, concealed “plug” housing distributes heat throughout
product zone, assuring uniform cabinet temperatures. Cabinet top has a built-in humidity relief
vent. The entire “plug” system is mounted on a
sturdy steel, rail-type base which can be easily
removed if refrigerator or freezer conversion is desired. A strict quality assurance team inspects all
material and components to certify that each model
conforms to the most exacting standards. All models are factory performance tested for a minimum
of 16 hours prior to crating.
INSULATION
All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.
CABINET CONSTRUCTION
All materials are of top quality, assembled to conform with strict quality-assurance requirements.
The cabinet front is constructed of heavy-gauge
polished stainless steel for durability. All cabinet
joints and seams are sealed vapor-tight. Case is of
all metal, welded construction and internally supported and braced for a rigid unit construction.
Cabinet design eliminated overlapping panels with
raw edges. Cabinet body is insulated with non-CFC,
foamed-in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Automatic interior lighting is controlled by door openings. Cabinets are equipped
with an easily removable, stainless steel ramp and
interior rack guides.
DOOR CONSTRUCTION
Solid hinged door shells are constructed of heavygauge stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door corners
are welded construction and polished. Replaceable
snap-in door gaskets are self-adjusting, heavyduty, magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are provided with built-in cylinder locks which are keyed
alike. Hinges are cam action, lift-off type featuring
positive safety stop at 120 degrees.
DL1WI-RT (8/14/13)
Loading...