Continental Refrigerator DL1RXS-SA-HD User Manual
DESIGNER LINE REFRIGERATOR
Project Name:
Model: DL1RXS-HD
1-Section Extra-Wide Reach-In
Shallow Depth with Half Doors
DL1RXS-HD - Stainless steel front, aluminum end panels and interior
DL1RXS-SA-HD - Stainless steel exterior, aluminum interior
DL1RXS-SS-HD - Stainless steel exterior and interior
Designed to maintain NSF-7 temperatures in 100°F ambient.
Model Specified:
Location:
Item No: Quantity:
AIA #: SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Environmentally-safe R-134a refrigerant
Self contained, performance-rated refrigeration system
Automatic, electric condensate evaporator*
CABINET ARCHITECTURE
3” non-CFC polyurethane foam insulation
Chrome-plated flow line handle
Cam action, lift off hinges
Self-closing door
Magnetic snap-in door gasket
Cylinder lock in door
Heavy-duty, epoxy-coated steel shelves
Adjustable 6” stainless steel legs
Options and Accessories
(upcharge and lead times may apply)
Stainless steel case back Pass-Thru
Additional epoxy-coated steel shelves Shallow depth
Chrome or stainless steel shelves Hinged glass door
Rehinging of door (consult factory) Increased refrigeration systems
Expansion valve system Special electrical req. (consult factory)
Wine display
Casters • One way security screws
Dial thermometer • Locking hasp (lock not included)
Remote models • Stainless steel mesh cover
Custom laminates • Coverless hinges
Half doors
Consult factory for other model configurations, options and accessories.
Correctional Facility Options
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
MODEL FEATURES
LED interior lighting
External digital thermometer
Energy saving switch for door heater
* Coil housing in cabinet zone and automatic, electric condensate in lieu of
hot gas condensate.
APPROVAL:
Model Specifications
DIMENSIONAL DATA
Net Capacity (cu. ft.) 26 (736 cu l)
Width, Overall (in.) 36 1/4 (921 mm)
Depth, Overall (incl. handles) (in.) 29 1/4 (743 mm)
Depth [less doors] (in.) 25 7/8 (657 mm)
Depth [doors open 90°] (in.) 55 1/2 (1410 mm)
Clear Door Width (in.) 29 5/8 (752 mm)
Clear Half Door Height (in.) 27 1/2 (699 mm)
Height, Overall (incl. 6” legs) (in.) 83 1/4 (2115 mm)
No. of Doors 2
No. of Shelves 3
Shelf Area (sq. ft.) 24.4 (2.3 sq m)
REFRIGERANT DATA
Condensing Unit Size (H.P.) 1/4
Capacity (BTU/Hr)* 2190
ELECTRICAL DATA
Voltage (int’l) 115/60/1 (220/50/1)
Feed Wires (incl. ground) 3
Total Amps (int’l) 5.7 (3.7)
10 ft. Cord/Plug [attached] (int’l) Yes (No)
SHIPPING DATA
Height - Crated (in.) 85 1/2 (2172 mm)
Width - Crated (in.) 42 (1067 mm)
Depth - Crated (in.) 42 (1067 mm)
Volume - Crated (cu. ft.) 87 (2464 cu l)
Weight Std - Crated (lbs.) 440 (200 kg)
Weight SS - Crated (lbs.) 500 (227 kg)
Weight Std - Uncrated (lbs.) 340 (154 kg)
Weight SS - Uncrated (lbs.) 400 (181 kg)
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
Equipped with one NEMA-5-15P Plug
(varies by country)
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
®
MADE IN THE U.S.A.
© Copyright 2014. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
Model Plan Views
29 5/8”
(752 mm)
(305 mm)
(581 mm)
DOOR OPENING
27 1/2”
(699 mm)
DOOR OPENING
36 1/4”
(921 mm)
12”
22 7/8”
54 3/4”
(1391 mm)
25 7/8”
(657 mm)
27 7/8”
(708 mm)
29 1/4”
(743 mm)
CABINET CONSTRUCTION
All materials are of top quality, assembled to conform with strict quality-assurance requirements.
The cabinet front is constructed of heavy-gauge
polished stainless steel for durability. All cabinet
joints and seams are sealed vapor-tight. Case is of
all metal, welded construction and internally supported and braced for a rigid unit construction.
Cabinet design eliminated overlapping panels with
raw edges. Cabinet body is insulated with non-CFC,
foamed-in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length louvered air grille located
above the doors allows equal air circulation to the
condensing unit. Easily removable, low-wattage,
anti-sweat door heaters concealed by a non-metallic, non-conductive, high-impact thermal breaker
strip eliminate condensate build-up on the cabinet
front. Automatic interior lighting is activated by
an easily accessible interior switch. Cabinets are
equipped with 6 inch adjustable stainless steel legs.
DOOR CONSTRUCTION
Solid hinged door shells are constructed of heavygauge stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door corners
are welded construction and polished. Replaceable
snap-in door gaskets are self-adjusting, heavyduty, magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are provided with built-in cylinder locks which are keyed
alike. Hinges are cam action, lift-off type featuring
positive safety stop at 120 degrees.
DL1RXS-HD (8/7/15)
77 1/4”
(1962 mm)
83 1/4”
(2115 mm)
6”
(152 mm)
FRONT VIEW
SIDE VIEW
IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
clearance of 12” is required.
REFRIGERATION SYSTEM
A “performance rated”, air-cooled, hermetically
sealed, capillary-type refrigeration system is installed on the top of each refrigerator. Plasticized
fin coil and air circulation fans are contained
within an easily accessible, low-profile, interior
ceiling mounted housing. Refrigeration system is
fully charged with environmentally safe R-134a
refrigerant. Refrigerators are designed to maintain
38°F-40°F (3°-5° Centigrade) while operating with
an unrestricted air supply in a maximum ambient
temperature of 100°F. All condensate water is
directed to the cabinet bottom for connection to
an automatic thermostatically-controlled evaporator which is supplied with each model. A strict
quality-assurance team inspects all materials and
components to certify that each model conforms
to the most exacting standards. All models are factory performance tested for a minimum of 16 hours
prior to crating.
INSULATION
All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.
SHELVING
Shelves are designed for heavy-duty use with .306”
diameter frame and brace members and .140” diameter fill wires spaced 3/4” apart. Shelves are
welded steel and epoxy-coated for a durable, long,
rust-free service life. Adjustments are in 1 inch increments and a wide door opening allows the use
of a variety of optional pan and tray slide types.
Loading...