Continental Refrigerator DL1RSE User Manual

DESIGNER LINE SLIM LINE REFRIGERATOR

Project Name:

Model: DL1RSE

1-Section Slim Line Reach-In
Refrigerator

DL1RSE - Stainless steel front, aluminum end panels and interior
DL1RSE-SA - Stainless steel exterior, aluminum interior
DL1RSE-SS- Stainless steel exterior and interior

Model Specified:

Location:

Item No: Quantity:

AIA #: SIS #:

Standard Model Features

REFRIGERATION SYSTEM

Environmentally-safe R-134a refrigerant
Self contained, performance-rated refrigeration system
Automatic, electric condensate evaporator*

CABINET ARCHITECTURE

2” non-CFC polyurethane foam insulation
Chrome-plated flow line handle
Cam action, lift off hinges
Self-closing door
Magnetic snap-in door gasket
Cylinder lock in door
Heavy-duty, epoxy-coated steel shelves
Adjustable 6” stainless steel legs

Options and Accessories

(upcharge and lead times may apply)

Stainless steel case back Shallow depth
Additional epoxy-coated steel shelves Hinged glass door
Chrome or stainless steel shelves Increased refrigeration systems
Expansion valve system Special electrical req. (consult factory)
Wine display
Casters • One way security screws
Dial thermometer • Locking hasp (lock not included)
Remote models • Stainless steel mesh cover
Custom laminates • Coverless hinges
Half doors

Consult factory for other model configurations, options and accessories.

Correctional Facility Options

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

MODEL FEATURES

Automatic interior lighting
External digital thermometer
Energy saving switch for door heater
Will accommodate 12 x 20 pans
Rehinging of door (in the field)

* Coil housing in cabinet zone and automatic, electric condensate in lieu of
hot gas condensate.

APPROVAL:

Model Specifications

DIMENSIONAL DATA

Net Capacity (cu. ft.) 15 (425 cu l)
Width, Overall (in.) 17 3/4 (451 mm)
Depth, Overall (incl. handle) (in.) 35 3/8 (899 mm)
Depth [less door] (in.) 32 (813 mm)
Depth [door open 90°] (in.) 47 3/8 (1203 mm)
Clear Door Width (in.) 13 1/8 (333 mm)
Clear Door Height (in.) 60 5/8 (1540 mm)
Height, Overall (incl. 6” legs) (in.) 83 1/4 (2115 mm)
No. of Doors 1
No. of Shelves 5
Shelf Area (sq. ft.) 9.3 (.9 sq m)

REFRIGERANT DATA

Condensing Unit Size (H.P.) 1/4
Capacity (BTU/Hr)* 1940

ELECTRICAL DATA

Voltage (int’l) 115/60/1 (220/50/1)
Feed Wires (incl. ground) 3
Total Amps (int’l) 5.5 (3.4)
10 ft. Cord/Plug [attached] (int’l) Yes (No)

SHIPPING DATA

Height - Crated (in.) 85 1/2 (2172 mm)
Width - Crated (in.) 32 (813 mm)
Depth - Crated (in.) 42 (1067 mm)
Volume - Crated (cu. ft.) 65 (1841 cu l)
Weight Std - Crated (lbs.) 290 (132 kg)
Weight SS - Crated (lbs.) 350 (159 kg)
Weight Std - Uncrated (lbs.) 190 (86 kg)
Weight SS - Uncrated (lbs.) 250 (113 kg)

* Rating @ +25°F evaporator, 90°F ambient

Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.

Equipped with one NEMA-5-15P Plug

(varies by country)

Toll-Free: 800-523-7138

Phone: [phone]
Fax: [phone]

539 Dunksferry Road
Bensalem, PA 19020

www.continentalrefrigerator.com

Due to our continued efforts in developing innovative
products, specifications subject to change without notice.

®

MADE IN THE U.S.A.

© Copyright 2013. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.

Model Plan Views

13 1/8”

77 1/4”

(1962 mm)

83 1/4”

(2115 mm)

(152 mm)

FRONT VIEW

SIDE VIEW

IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
clearance of 12” is required.

REFRIGERATION SYSTEM

A “performance rated”, air-cooled, hermetically
sealed, capillary-type refrigeration system is in­stalled on the top of each refrigerator. Plasticized
fin coil and air circulation fans are contained
within an easily accessible, low-profile, interior
ceiling mounted housing. Refrigeration system is
fully charged with environmentally safe R-134a
refrigerant. Refrigerators are designed to maintain
38°F-40°F (3°-5° Centigrade) while operating with
an unrestricted air supply in a maximum ambient
temperature of 100°F. All condensate water is
directed to the cabinet bottom for connection to
an automatic thermostatically-controlled evapo­rator which is supplied with each model. A strict
quality-assurance team inspects all materials and
components to certify that each model conforms
to the most exacting standards. All models are fac­tory performance tested for a minimum of 16 hours
prior to crating.

INSULATION

All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.

SHELVING

Shelves are designed for heavy-duty use with .306”
diameter frame and brace members and .140” di­ameter fill wires spaced 3/4” apart. Shelves are
welded steel and epoxy-coated for a durable, long,
rust-free service life. Adjustments are in 1 inch
increments and will accommodate 12 x 20 pans.

(333 mm)

DOOR

OPENING

6”

17 3/4”

(451 mm)

35 3/8”

(899 mm)

32”

(813 mm)

30”

(762 mm)

(1438 mm)

60 5/8”

(1540 mm)

DOOR

OPENING

56 5/8”

CABINET CONSTRUCTION

All materials are of top quality, assembled to con­form with strict quality-assurance requirements.
The cabinet front is constructed of heavy-gauge
polished stainless steel for durability. All cabinet
joints and seams are sealed vapor-tight. Case is of
all metal, welded construction and internally sup­ported and braced for a rigid unit construction.
Cabinet design eliminates overlapping panels with
raw edges. Cabinet body is insulated with non-CFC,
foamed-in-place polyurethane foam with an aver­age thickness of 2 inches to ensure increased ener­gy efficiency. Full-length louvered air grille located
above the door allows equal air circulation to the
condensing unit. Easily removable, low-wattage,
anti-sweat door heater concealed by a non-metal­lic, non-conductive, high-impact thermal breaker
strip eliminates condensate build-up on the cabi­net front. Automatic interior lighting is activated
by an easily accessible interior switch. Cabinet is
equipped with 6 inch adjustable stainless steel legs.

DOOR CONSTRUCTION

Solid hinged door shell is constructed of heavy­gauge stainless steel and is internally braced and
urethane-foam-insulated for rigidity. Door corners
are welded construction and polished. Replace­able snap-in door gasket is self-adjusting, heavy­duty, magnetic type. Door handle and hinges are
chrome-plated and non-corrosive. Door is provided
with built-in cylinder lock. Hinges are cam action,
lift-off type featuring positive safety stop at 120
degrees.

DL1RSE (8/27/13)